FUNCTION OF MAIN COMPONENTS
The main components in the RSA have the following functions.
| Components | Function | |
|---|---|---|
|
*1: The threshold can be adjusted to 1 of 3 levels through the customization function. *2: HV models *3: Gasoline models *4: Models with CVT *5: Models with navigation system |
||
| Forward Recognition Camera | ·
Captures road signs. ·
Performs RSA system control based on information of road signs captured by the camera sensor. ·
Controls the supply of electric current to the camera heater when the ambient temperature is low. |
|
| Camera Heater (Forward Recognition Hood with Heater Sub-assembly) | Control is performed by the forward recognition camera to supply electric current and heat the heater, preventing the windshield glass in front of the forward recognition camera from fogging up. | |
| Millimeter Wave Radar Sensor Assembly | Detects object information and sends signal to forward recognition camera. | |
| Combination Meter Assembly | Combination Meter Assembly | Sends a turn signal command to the forward recognition camera. |
| Multi-information Display | ·
Displays road signs recognized by the forward recognition camera. ·
The RSA system can be turned on and off through the settings tab. |
|
| Buzzer | Sounds when the speed limit is exceeded*1 or there is an entry prohibition notification. | |
| Steering Pad Switch Assembly | Meter Control Switch | Sends a multi-information operating signal to the forward recognition camera. |
| Turn Signal Switch | Sends a turn signal command to the steering sensor. | |
| Steering Sensor | ·
Detects the angle and direction of steering and transmits signals to the forward recognition camera. ·
Sends a turn signal command to the combination meter assembly. |
|
| Skid Control ECU | Sends a vehicle speed signal from the speed sensor to the forward recognition camera. | |
| Hybrid Vehicle Control ECU*2 | Sends the shift position signal to the forward recognition camera. | |
| ECM*3 | Sends the shift position signal to the forward recognition camera. | |
| Transmission Control ECU*4 | Sends the shift position signal to the ECM. | |
| Airbag ECU (Airbag Sensor Assembly) | Yawrate Sensor | Detects the yaw rate and sends it to the forward recognition camera. |
| Radio and Display Receiver Assembly*5 | Sends map information from the navigation ECU to the forward recognition camera. | |
| Navigation ECU*5 | Sends map information to the radio and receiver assembly. | |
| Air Conditioning Amplifier Assembly | Sends ambient temperature signals to the forward recognition camera. | |
| Central Gateway ECU (Network Gateway ECU) | Transmits the signal between the CAN communication buses. | |
| Main Body ECU (Multiplex Network Body ECU) | Sends country specification information signals to the forward recognition camera. | |
FUNCTION
The RSA system recognizes the following traffic signals using the camera sensor.
| Category | Sign Type | Example of Recognizable Sign | |
|---|---|---|---|
|
*: Models with navigation system |
|||
| Speed Limit | Round maximum speed limit/End of speed limit |
|
|
| No Overtaking | No overtaking/End of no overtaking |
|
|
| End of Prohibition |
|
||
| Supplemental Signs | Road Condition Signs | Ramp way |
|
| Rain |
|
||
| Wet |
|
||
| Supplemental Signs | Road Condition Signs | Ice |
|
| Time |
|
||
| Information Signs Related Speed Limit | Highway sign (entrance, exit) |
|
|
| Motorway sign (entrance, exit) |
|
||
| Information Signs Related Speed Limit | Built-up area sign (start, end) |
|
|
| Information Signs Related Speed Limit | Home zone sign (start, end) |
|
|
| No Entry* |
|
||
| Stop |
|
||
| Category | Sign Type | Example of Recognizable Sign |
|---|---|---|
| Speed Limit | Round maximum speed limit |
|
The RSA system displays the following traffic signals using the camera sensor.
| Category | Display Example | Details | |
|---|---|---|---|
|
*: Models with navigation system |
|||
| Speed Limit Related |
|
·
Informs the driver of the maximum speed limit of the currently driven road. ·
The displayed sign reflects the speed limit on the recognized sign. |
|
| Speed Limit Related |
|
Informs the driver highway sign (entrance, exit). | |
|
Informs the driver motorway sign (entrance, exit). | ||
| Speed Limit Related |
|
Informs the driver built-up area sign (start, end). | |
| Speed Limit Related |
|
Informs the driver home zone sign (start, end). | |
| No Overtaking Related |
|
Informs the driver when they are in a no overtaking zone on the currently driven road. | |
| No Entry* |
|
Informs the driver that there are vehicle entry restricted sections on the currently driven road. | |
| All Canceled (All restrictions canceled. Return to default road regulations.) |
|
Informs the driver when all applicable prohibitions, such as speed limit and no overtaking, have ended. | |
| Stop |
|
Informs the driver that there is a stop ahead. | |
| Speed Limit with Supplemental Sign Related | Ramp Way |
|
Informs the driver of the ramp way direction. However, this item is not displayed when making a lane change without operating the turn signal light. |
| Rain |
|
Informs the driver of the maximum speed limit on the currently driven road when it is raining or the road surface is wet. | |
| Ice |
|
Informs the driver of the maximum speed limit on the currently driven road when there is accumulated snow or ice. | |
| Speed Limit with Supplemental Sign Related | Time |
|
Informs the driver when of the time zone speed limit sign on the currently driven road. |
| Blank |
|
The display is blank when the system is unable to recognize a supplemental sign. | |
| Category | Display Example | Details |
|---|---|---|
| Speed Limit |
|
·
Informs the driver of the maximum speed limit of the currently driven road. ·
The displayed sign reflects the speed limit on the recognized sign. |
A non-official (sign not meeting Vienna Convention) or a recently introduced traffic sign may not be recognized.
Notification functions are used in the RSA system which invert the colors of displayed signs, flash signs, etc. to notify the driver.
Speed Limit Exceeded Notification
While a speed limit sign is displayed, if the actual vehicle speed exceeds the speed limit plus a designated threshold*1, the colors of the displayed sign are inverted and the buzzer sounds.*2 For example, if the threshold is set to 5 km/h and the speed limit sign is 60 km/h, the colors of the displayed sign are inverted and the buzzer sounds, when the actual vehicle speed exceeds 65 km/h. Furthermore, the system also inverts a speed limit sign with supplemental sign in the same way. However, the system does not invert the colors of the supplemental sign.
*1: The threshold can be adjusted to 1 of 3 levels through the customization function.
*2: Customization is required for inverted display and sounding of the buzzer.
| Notification Method | Display Example |
|---|---|
| Inverted Display |
|
No Overtaking Notification
While a no overtaking sign is displayed, if the system detects that the vehicle is attempting to overtake another vehicle, the system flashes the displayed sign and sounds the buzzer.*
*: Customization is required for blinking display and sounding of the meter buzzer.
| Notification Method | Display Example |
|---|---|
| Flashing Display |
|
No-entry Notification (Models with Navigation System)
While a no entry sign is recognized, if the system detects that the driver is driving on a road where entry is prohibited, based on map information, the system flashes the displayed sign and sounds the meter buzzer.*
*: Customization is required for blinking display and sounding of the meter buzzer.
| Notification Method | Display Example |
|---|---|
| Flashing Display |
|
The RSA system can be turned on or off through the settings tab of the multi-information display.
A customization function is used for the RSA, which allows settings such as the notification method and level for exceeding the speed limit to be changed. Setting changes are made through the customization tab of the multi-information display. Refer to the Repair Manual for details.
SYSTEM CONTROL
RSA Control Pattern 1
After a road sign is recognized by the forward recognition camera, the sign is displayed on the multi-information display.
While a sign is displayed on the multi-information display, if a new road sign is not recognized within a specified distance, display of the current sign is turned off.
While a sign is displayed on the multi-information display, if the vehicle passes the sign, display of the current sign is turned off.
RSA Control Pattern 2
When the power switch*1 or ignition switch*2 is turned off while a speed limit sign is displayed on the multi-information display, the same sign is displayed when the power switch*1 is turned on (IG) or ignition switch*2 is turned ON again.
*1: HV models
*2: Gasoline models
RSA Control Pattern 3
While a sign is displayed on the multi-information display, the sign is turned off when turning left or right onto a new road.
DIAGNOSIS
In order to make system inspections easier to perform, a diagnosis function is used in consideration of serviceability. The DTCs of malfunctioning parts can be read by connecting the Global TechStream (GTS). For details, refer to the Repair Manual.