OPERATION
The combination meter assembly displays recognized signs on the multi-information display based on information of road signs recognized by the camera sensor.
The RSA system display mode can be selected by switching the display mode of the multi-information display.
When the driving assist system information tab is selected for display on the multi-information display, road signs recognized by the camera sensor are displayed on the upper portion of the multi-information display.
When the driving assist system information tab is selected, a maximum of 3 signs can be displayed simultaneously. When 3 signs are displayed, the signs are displayed in the following order from left to right: no overtaking related or no entry*, speed limit related or all canceled sign, and speed limit with supplemental sign related. (LHD models)
*: Models with navigation system
For RHD models, the display order is the reverse of that shown above. For Australia destination vehicles, only speed limit sign is displayed in the center.
No entry related have higher priority than no overtaking related.
| *A | Models with Navigation System | *B | Except Models for Australia |
| *a | No Overtaking Related | *b | No Entry |
| *c | Stop Sign | *d | Speed Limit Related |
| *e | All Canceled Sign | *f | Speed Limit with Supplemental Sign Related |
| *g | The illustration shown is an example only. The illustration may differ from the actual vehicle screen. | - | - |
When an information tab other than the driving assist system information tab is selected for display on the multi-information display, road signs recognized by the camera sensor are displayed. Furthermore, the display is only for speed limit signs or no entry notification*. It is not displayed for any overtaking signs and speed limit with supplemental signs.
*: Models with navigation system
No entry notification have higher priority than speed limit signs.
Show a duplicated symbol of signs if multiple signs are recognized.
| *a | Multiple Road Sign Recognized | *b | The illustration shown is an example only. The illustration may differ from the actual vehicle screen. |
When there is a malfunction in the RSA system or the system is temporarily unusable, a warning message is displayed on the multi-information display and the buzzer sounds.
| Condition | Multi-information Display | Buzzer |
|---|---|---|
| System Malfunction | Road Sign Assist System Malfunction | Sounds |
| Camera sensor is temporarily malfunctioning
·
Abnormal camera sensor voltage ·
Camera sensor temperature outside of operational range ·
Other camera sensor malfunction |
Front Camera
Unavailable |
- |
| Camera sensor view is unclear | Front Camera
Temporarily Unavailable See Owner's Manual |
- |