Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM › 2018.10–2019.09
NM3620E _58 Vehicle Interior _076457 PRE-COLLISION _0377069 PRE-COLLISION SYSTEM CO CONTROL F

PRE-COLLISION  PRE-COLLISION SYSTEM  CONTROL  PRE-COLLISION CONTROL  


FUNCTION OF MAIN COMPONENTS


HV Models
Item Function
Forward Recognition Camera
·

Acquires information about a preceding vehicle, pedestrian or bicycle riders.

·

Operates the camera heater (forward recognition hood with heater sub-assembly) to remove condensation from the part of the windshield in front of the forward recognition camera.

·

Determines whether a collision is imminent based on the information received from each sensor. Sends control signals to the skid control ECU and hybrid vehicle control ECU when it determines that there is a possibility of a collision or a collision is imminent based on the information received from each sensor.


Camera Heater (Forward Recognition Hood with Heater Sub-assembly) Heats the sheet heater (heating element) in accordance with the signals from the forward recognition camera.
Millimeter Wave Radar Sensor Assembly Radiates millimeter waves forward, uses the reflected millimeter waves for detecting the presence of a vehicle ahead, the vehicle-to-vehicle distance, and the relative speed, and then transmits this information to the forward recognition camera.
Airbag ECU (Airbag Sensor Assembly) Yawrate Sensor Detects the yaw rate and lateral/longitudinal deceleration of the vehicle and transmits the signal to the forward recognition camera.
Steering Sensor Detects the steering direction and angle of the steering wheel and transmits the signal to the forward recognition camera.
Speed Sensor Detects the wheel speed and transmits signals to the skid control ECU.
Ambient Temperature Sensor (Thermistor Assembly) Detects the ambient temperature and transmits signals to the air conditioning amplifier assembly.
Steering Pad Switch Assembly Meter Control Switch Switches the display of multi-information display within combination meter assembly.
VSC OFF Switch Disables the pre-collision braking and pre-collision brake assist operation when the switch is turned on. The PCS warning light illuminates to show that the pre-collision braking and pre-collision brake assist operation is disabled. The pre-collision warning function can still operate.
Stop Light Switch Assembly Detects the depressing of the brake pedal and transmits a signal to the skid control ECU.
Brake Booster with Master Cylinder Assembly Brake Actuator
·

Actuates the brakes in accordance with the signals from the skid control ECU.

·

Detects the master cylinder pressure and transmits a signal to the skid control ECU.

·

Detects the wheel cylinder pressure and transmits a signal to the skid control ECU.


Skid Control ECU
·

Receives a brake assist standby request signal from the forward recognition camera, and switches the brake assist to standby mode. When a master cylinder pressure signal is input, it activates the brake assist.

·

Receives a pre-collision brake request signal from the forward recognition camera, and then applies the brakes.

·

Transmits vehicle speed signals to the forward recognition camera.


Combination Meter Assembly PCS Warning Light
·

Illuminates to warn the driver in accordance with signals from the forward recognition camera.

·

Illuminates when the pre-collision system is malfunctioning.

·

Illuminates when the pre-collision system is not available due to when the pre-collision system is turned OFF or pre-collision braking and pre-collision brake assist operation are disabled using the VSC OFF switch.


VSC OFF Indicator Light Illuminates when in VSC OFF mode.
Multi-information Display
·

Displays a warning message to inform or warn the driver of the system condition in accordance with signals from the forward recognition camera.

·

Displays the pre-collision system setting screen.


Buzzer Sounds to warn the driver in accordance with signals from the forward recognition camera.
Hybrid Vehicle Control ECU
·

Transmits accelerator pedal position signal and shift position signal to the forward recognition camera.

·

Controls hybrid system output based on the signal from the forward recognition camera.


Air Conditioning Amplifier Assembly Transmits ambient temperature signals to the forward recognition camera.
Main Body ECU (Multiplex Network Body ECU) Outputs the specification signal of the vehicle to forward recognition camera.
Central Gateway ECU (Network Gateway ECU) Relays and transmits each CAN communication data signal.

Gasoline Models
Item Function

*1: Except models with manual transaxle

*2: Models with manual transaxle

*3: Models with CVT

Forward Recognition Camera
·

Acquires information about a preceding vehicle, pedestrian or bicycle riders.

·

Operates the camera heater (forward recognition hood with heater sub-assembly) to remove condensation from the part of the windshield in front of the forward recognition camera.

·

Determines whether a collision is imminent based on the information received from each sensor. Sends control signals to the skid control ECU and ECM when it determines that there is a possibility of a collision or a collision is imminent based on the information received from each sensor.


Camera Heater (Forward Recognition Hood with Heater Sub-assembly) Heats the sheet heater (heating element) in accordance with the signals from the forward recognition camera.
Millimeter Wave Radar Sensor Assembly Radiates millimeter waves forward, uses the reflected millimeter waves for detecting the presence of a vehicle ahead, the vehicle-to-vehicle distance, and the relative speed, and then transmits this information to the forward recognition camera.
Airbag ECU (Airbag Sensor Assembly) Yawrate Sensor Detects the yaw rate and lateral/longitudinal deceleration of the vehicle and transmits the signal to the forward recognition camera.
Steering Sensor Detects the steering direction and angle of the steering wheel and transmits the signal to the forward recognition camera.
Speed Sensor Detects the wheel speed and transmits signals to the skid control ECU.
Ambient Temperature Sensor (Thermistor Assembly) Detects the ambient temperature and transmits signals to the air conditioning amplifier assembly.
Steering Pad Switch Assembly Meter Control Switch Switches the display of multi-information display within combination meter assembly.
VSC OFF Switch Disables the pre-collision braking and pre-collision brake assist operation when the switch is turned on. The PCS warning light illuminates to show that the pre-collision braking and pre-collision brake assist operation is disabled. The pre-collision warning function can still operate.
Stop Light Switch Assembly Detects the depressing of the brake pedal and transmits a signal to the skid control ECU.
Brake Actuator Assembly Brake Actuator
·

Actuates the brakes in accordance with the signals from the skid control ECU.

·

Detects the master cylinder pressure and transmits a signal to the skid control ECU.

·

Detects the wheel cylinder pressure and transmits a signal to the skid control ECU.


Skid Control ECU
·

Receives a brake assist standby request signal from the forward recognition camera, and switches the brake assist to standby mode. When a master cylinder pressure signal is input, it activates the brake assist.

·

Receives a pre-collision brake request signal from the forward recognition camera, and then applies the brakes.

·

Transmits vehicle speed signals to the forward recognition camera.


Combination Meter Assembly PCS Warning Light
·

Illuminates to warn the driver in accordance with signals from the forward recognition camera.

·

Illuminates when the pre-collision system is malfunctioning.

·

Illuminates when the pre-collision system is not available due to when the pre-collision system is turned OFF or pre-collision braking and pre-collision brake assist operation are disabled using the VSC OFF switch.


VSC OFF Indicator Light Illuminates when in VSC OFF mode.
Multi-information Display
·

Displays a warning message to inform or warn the driver of the system condition in accordance with signals from the forward recognition camera.

·

Displays the pre-collision system setting screen.


Buzzer Sounds to warn the driver in accordance with signals from the forward recognition camera.
ECM
·

Transmits accelerator pedal position signal and shift position signal to the forward recognition camera.*1

·

Transmits accelerator pedal position signal and reverse position signal (back-up light switch assembly signal) to the forward recognition camera.*2

·

Controls engine output based on the signal from the forward recognition camera.


Transmission Control ECU*3 Transmits shift position signal to the ECM.
Air Conditioning Amplifier Assembly Transmits ambient temperature signals to the forward recognition camera.
Main Body ECU (Multiplex Network Body ECU) Outputs the specification signal of the vehicle to forward recognition camera.
Central Gateway ECU (Network Gateway ECU) Relays and transmits each CAN communication data signal.


OPERATING CONDITION


a.

Availability of the pedestrian detection function and bicycle rider detection function depend on the region in which the vehicle was sold.

Regions Function availability
Region A The pedestrian detection function and bicycle rider detection function are available
Region B The bicycle rider detection function is not available
Region C The pedestrian detection function and bicycle rider detection function are not available


b.

The pre-collision system is enabled and the system determines that the possibility of a frontal collision with a detected object is high. Each function is operational at the following speed:

i.

Pre-collision Warning

Detectable Objects Vehicle Speed Relative Speed between Your Vehicle and Object
Vehicles Approximately 10 km/h to 180 km/h
(7 mph to 110 mph)
←
Pedestrians and Bicycle Riders Approximately 10 km/h to 80 km/h
(7 mph to 50 mph)
←


ii.

Pre-collision Brake Assist

Detectable Objects Vehicle Speed Relative Speed between Your Vehicle and Object
Vehicles Approximately 30 km/h to 180 km/h
(20 mph to 110 mph)
←
Pedestrians and Bicycle Riders Approximately 30 km/h to 80 km/h
(20 mph to 50 mph)
←


iii.

Pre-collision Braking

Detectable Objects Vehicle Speed Relative Speed between Your Vehicle and Object
Vehicles Approximately 10 km/h to 180 km/h
(7 mph to 110 mph)
←
Pedestrians and Bicycle Riders Approximately 10 km/h to 80 km/h
(7 mph to 50 mph)
←



c.

The system may not operate in the following situations:

*1: Except models with manual transaxle

*2: Models with manual transaxle

·

If an auxiliary battery terminal has been disconnected and reconnected and then the vehicle has not been driven for a certain amount of time

·

If the shift position is in R*1

·

If the shift lever position is in reverse*2

·

If VSC is disabled (only the pre-collision warning function will be operational)

·

If the PCS warning light is illuminated




d.

Cancelation of the pre-collision braking

i.

If either of the following occur while the pre-collision braking function is operating, it will be canceled:

·

The accelerator pedal is depressed strongly.

·

The steering wheel is turned sharply or abruptly.






SYSTEM CONTROL


a.

The forward recognition camera performs pre-collision system control based on signals from ECUs, sensors and switches.

Control Function
Pre-collision Warning When the system determines that the possibility of a frontal collision is high, the buzzer sounds intermittently and messages are displayed on the multi-information display in the combination meter assembly in order to alert the driver.
Pre-collision Brake Assist When the system determines that the possibility of a frontal collision is high, the system applies greater braking force in relation to how strongly the brake pedal is depressed.
Pre-collision Braking When the system determines that the possibility of a frontal collision is high, the system warns the driver. If the system determines that the possibility of a frontal collision is extremely high, the brakes are automatically applied to help avoid the collision or help reduce the collision speed.


b.

The pre-collision system uses a millimeter wave radar sensor assembly and forward recognition camera to detect objects in front of your vehicle.

HINT:
·

Depending on the region in which the vehicle was sold, the pedestrian detection function and bicycle rider detection function may not be available.

·

The millimeter wave radar sensor assembly excels at detecting the position and speed of target objects, which allows for high-precision detection of long-distance objects and stable operation at night or in bad weather.

·

The forward recognition camera has superior object shape and size identification performance. However, performance deterioration can easily occur when visibility is poor. In that case, only objects inside the area illuminated by the headlights can be detected at night.

·

The pre-collision system inputs detection information from both the millimeter wave radar sensor assembly and forward recognition camera to ensure high recognition performance and reliability.




c.

When there is a possibility of a collision, the pre-collision system displays messages on the multi-information display, sounds an alert using the buzzer and performs pre-collision brake assist during brake pedal operations. Also, when there is a high possibility of a collision, the system performs pre-collision braking, contributing to collision avoidance support and collision damage reduction.


d.

When the pre-collision system performs brake control, the skid control ECU illuminates the stop lights to inform drivers behind the vehicle of brake operations.

HV Models
Y241613C01
2.094,1.708 2.094,1.042 true 3.667,1 3.667,0.5 true 5.021,2.229 5.375,1.469 true 2.573,4.365 3.083,3.49 true 5.958,4.24 4.656,3.427 true 0.76,0.26 1.177,0.563 0.417,0.302 10 false *a 2.01,1.75 2.427,2.052 0.417,0.302 10 false *b 3.583,0.313 4,0.615 0.417,0.302 10 false *c 5.281,1.292 5.698,1.594 0.417,0.302 10 false *1 2.448,4.375 2.865,4.677 0.417,0.302 10 false *2 5.979,4.208 6.396,4.51 0.417,0.302 10 false *3
*1 Forward Recognition Camera *2 Millimeter Wave Radar Sensor Assembly
*3 Brake Booster with Master Cylinder Assembly
·

Skid Control ECU


- -
*a Collision Imminent *b Vehicle Ahead
*c Own Vehicle - -
V100145

Forward Recognition Camera Detection Area
V100144

Millimeter Wave Radar Sensor Assembly Detection Area


Gasoline Models
Y241602C02
2.094,1.708 2.094,1.042 true 3.667,1 3.667,0.5 true 5.021,2.229 5.375,1.469 true 2.573,4.365 3.083,3.49 true 6.146,3.75 3.938,3.083 true 0.76,0.26 1.177,0.563 0.417,0.302 10 false *a 2.01,1.75 2.427,2.052 0.417,0.302 10 false *b 3.583,0.313 4,0.615 0.417,0.302 10 false *c 5.281,1.292 5.698,1.594 0.417,0.302 10 false *1 2.448,4.375 2.865,4.677 0.417,0.302 10 false *2 6.188,3.708 6.604,4.01 0.417,0.302 10 false *3
*1 Forward Recognition Camera *2 Millimeter Wave Radar Sensor Assembly
*3 Brake Actuator Assembly
·

Skid Control ECU


- -
*a Collision Imminent *b Vehicle Ahead
*c Own Vehicle - -
V100145

Forward Recognition Camera Detection Area
V100144

Millimeter Wave Radar Sensor Assembly Detection Area



e.

Pre-collision Brake Assist

i.

While the pre-collision system has determined that there is a high possibility of a collision, brake hydraulic pressure assistance is performed when the driver depresses the brake pedal. Also, the amount of brake hydraulic pressure assistance increases further when the system determines that there is an even higher possibility of a collision.

Y191467E07
1.031,0.219 2.354,0.75 1.323,0.531 10 false Possibility of collision determined 2.531,0.229 3.302,0.781 0.771,0.552 10 false Brake pedal depressed 3.594,0.229 4.708,0.75 1.115,0.521 10 false High possibility of collision determined 5.094,0.229 5.719,0.771 0.625,0.542 10 false Collision 0.781,1.427 1.677,1.688 0.896,0.26 10 false Normal Driving 1.948,1.427 2.74,1.813 0.792,0.385 10 false Operation on Standby 2.906,1.427 4.208,1.885 1.302,0.458 10 false Brake Fluid Pressure Increased 4.438,1.438 5.167,2.083 0.729,0.646 10 false Brake Fluid Pressure Further Increased 0.063,0.583 0.958,0.844 0.896,0.26 10 false Elapsed Time 2.917,2.927 4.323,4.385 1.406,1.458 10 false Brake Fluid Pressure is Increased as soon as Brake Pedal is Depressed 5.208,3.385 7.094,4.365 1.885,0.979 10 false Additional Brake Fluid Pressure when Possibility of Collision is High 5.208,4.417 7.156,4.833 1.948,0.417 10 false Additional Brake Fluid Pressure 5.24,4.844 7.146,5.25 1.906,0.406 10 false Normal Brake Fluid Pressure 0.01,4.521 0.729,4.865 0.719,0.344 10 false Brake Fluid Pressure 0.094,6.24 0.635,6.802 0.542,0.563 10 false Vehicle Speed 5.271,5.823 7.125,6.333 1.854,0.51 10 false Normal Braking 5.25,6.51 7.104,7.302 1.854,0.792 10 false Deceleration when Possibility of Collision is High 2.948,6.271 4.177,6.719 1.229,0.448 10 false Pre-collision Brake Assist



f.

Pre-collision Braking

i.

When the pre-collision system detects an object such as a vehicle or road structure in front of the vehicle and determines that the possibility of a collision is high, the system displays a warning message on the multi-information display, and sounds the buzzer to warn the driver.


ii.

When the pre-collision system determines that there is a high possibility of a collision, the system performs pre-collision braking control.

Y191502E07
0.583,0.385 1.906,0.906 1.323,0.521 10 false Possibility of collision determined* 2.448,0.385 3.729,0.844 1.281,0.458 10 false High possibility of collision determined 5.646,0.375 6.208,0.635 0.563,0.26 10 false Collision 0.042,1.083 0.573,1.49 0.531,0.406 10 false Elapsed Time 0.583,1.583 1.042,1.958 0.458,0.375 10 false Normal Driving 1.667,1.583 5.479,1.958 3.813,0.375 10 false Pre-collision Warning (Display "BRAKE!" and Buzzer Sounds) 3.917,2.417 5.219,2.719 1.302,0.302 10 false Pre-collision Braking 0.083,3.75 0.563,4.135 0.479,0.385 10 false Vehicle Speed 6.042,3.844 7.115,4.167 1.073,0.323 10 false Speed Reduction 0.083,5.083 7,5.51 6.917,0.427 10 false *: Warning Timing can be selected as "Early", "Middle" or "Late" by operating the Steering Pad Switch Assembly and Multi-information Display



g.

Conditions under which the system may operate even if there is no possibility of a collision

i.

In some situations such as the following, the system may determine that is a possibility of a frontal collision and operate.

·

When passing a detectable object, etc.

·

When changing lanes while overtaking a detectable object, etc.

·

When approaching a detectable object in an adjacent lane or on the roadside, such as when changing the course of travel or driving on a winding road.

Y206030

·

When rapidly closing on a detectable object, etc.

·

When approaching objects on the roadside, such as detectable objects, guardrails, utility poles, trees, or walls.

·

When there is a detectable object or other object by the roadside at the entrance of a curve.

Y186309

·

When there are patterns or paint in front of your vehicle that may be mistaken for a detectable object.

·

When the front of your vehicle is hit by water, snow, dust, etc.

·

When overtaking a detectable object that is changing lanes or making a right/left turn.

Y206028

·

When passing a detectable object in an oncoming lane that is stopped to make a right/left turn.

Y206029

·

When a detectable object approaches very close and then stops before entering the path of your vehicle.

·

If the front of your vehicle is raised or lowered, such as when on an uneven or undulating road surface.

·

When driving on a road surrounded by a structure, such as in a tunnel or on an iron bridge.

·

When there is a metal object (manhole cover, steel plate, etc.), steps, or a protrusion in front of your vehicle.

·

When passing under an object (road sign, billboard, etc.).

Y190952

·

When approaching an electric toll gate barrier, parking area barrier, or other barrier that opens and closes.

·

When using an automatic car wash.

·

When driving through or under objects that may contact your vehicle, such as thick grass, tree branches, or a banner.

Y186314

·

When driving through steam or smoke.

·

When driving near an object that reflects radio waves, such as a large truck or guardrail.

·

When driving near a TV tower, broadcasting station, electric power plant, or other location where strong radio waves or electrical noise may be present.


HINT:

Depending on the region in which the vehicle was sold, the pedestrian detection function and bicycle rider detection function may not be available.





FUNCTION


a.

The pre-collision system is equipped with a function that can change the following settings.

·

Pre-collision system on (activates) or off (does not activate) setting

·

Warning sensitivity level (Early, Middle or Late) setting



Y241603C01
3.26,0.531 3.958,1.25 true 4.292,1.646 4.094,2.844 4.094,2.844 4.854,1.521 true 3.146,0.365 3.552,0.698 0.406,0.333 10 false *1 4,2.865 4.406,3.198 0.406,0.333 10 false *2
*1 Combination Meter Assembly *2 Steering Pad Switch Assembly


i.

Setting Pre-collision System On (Activates) or Off (does Not Activate)

·

The on (activates) or off (does not activate) setting for the pre-collision system can be selected on the multi-information display setting screen.

·

When the pre-collision system is set to off, the PCS warning light illuminates. At that time, the multi-information display shows that the pre-collision system is off.

Y241605C01
4.51,1.427 4.094,0.531 true 5.26,1.781 4.427,2.958 4.427,2.958 4.667,1.969 true 3.99,0.354 4.323,0.76 0.333,0.406 10 false *1 4.313,2.979 4.646,3.385 0.333,0.406 10 false *2 1.375,2.5 1.708,2.906 0.333,0.406 10 false *a 2.906,2.5 3.24,2.906 0.333,0.406 10 false *b
*1 Combination Meter Assembly *2 Steering Pad Switch Assembly
*a Multi-information Display *b PCS Warning Light


HINT:
·

The system is automatically enabled each time the power switch is turned on (IG).*1

·

The system is automatically enabled each time the ignition switch is turned ON.*2

*1: HV models

*2: Gasoline models






ii.

Warning Sensitivity Level Changing

·

The warning sensitivity level of the pre-collision system can be switched on the multi-information display setting screen.

HINT:
·

The pre-collision system is set to Middle by default.

·

When Late is selected, the pre-collision system is set to perform a warning operation when there is a short distance between the vehicle and the target object it may collide with (at a timing later than Middle).

·

When Early is selected, the pre-collision system is set to perform a warning operation when there is a long distance between the vehicle and the target object it may collide with (at a timing earlier than Middle).

·

The selected warning sensitivity level is maintained even after the power switch is turned off.*1

·

The selected warning sensitivity level is maintained even after the ignition switch is turned off.*2

*1: HV models

*2: Gasoline models








DIAGNOSIS


a.

Initial Check

i.

The forward recognition camera performs an initial check on the system for approximately 3 seconds after the power switch has been turned on (IG).*1


ii.

The forward recognition camera performs an initial check on the system for approximately 3 seconds after the ignition switch has been turned ON.*2

*1: HV models

*2: Gasoline models




b.

Monitor Function

i.

After completing the initial check, the pre-collision system becomes ready to operate. During this time, the forward recognition camera periodically monitors the system for any malfunctions.



c.

Diagnostic Trouble Code (DTC)

i.

If the forward recognition camera detects a malfunction in the pre-collision system, it stores a Diagnostic Trouble Code (DTC) in memory.