OUTLINE
A grille shutter system is used. This system blocks the flow of air into the engine compartment from the lower radiator grille.
The grille shutter suitably controls cooling airflow for the engine and inverter* by opening and closing the shutter, reducing drag.
The grille shutter system is composed of a swing grille actuator assembly, radiator shutter assembly, air conditioning amplifier assembly, hybrid vehicle control ECU* and ECM.
The grille shutter system is controlled by the swing grille actuator assembly. The swing grille actuator assembly is integrated into the radiator shutter sub-assembly.
*: HV models
MAIN FEATURES
The adoption of the grille shutter system has the following advantages.
Reduces the air resistance in the engine compartment when the vehicle is traveling at high speeds.
Facilitates warm-up of the engine by blocking the flow of cold air into the engine compartment when the engine coolant temperature and inverter coolant temperature are low. This supports fuel economy.
| *1 | Radiator Shutter Assembly | *2 | Swing Grille Actuator Assembly |
| *3 | Front Bumper Reinforcement Sub-assembly | *4 | Front Bumper Reinforcement Sub-assembly No. 2 |
| *5 | Grille Shutter Fin No. 1 | *6 | Grille Shutter Fin No. 2 |
| *a | A - A Cross Section | *b | Open |
| *c | Closed | - | - |
PRECAUTION
Ignition Switch Expressions (Gasoline Models)
The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch
(Position) |
Engine Switch
(Condition) |
|---|---|---|
| Ignition Switch off | LOCK | Off (Lock) |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON | ON | On (IG) |
| Engine Start | START | On (Start) |