CONSTRUCTION
A gel type ElectroChromic (EC) mirror cell (which consists of a liquid type electrochromic material situated between transparent conductive films) is used, achieving glare-prevention using an electrochemical reduction-oxidation reaction*. Also, the Liquid Crystal Display (LCD) screen and guided light plate are overlapped in the lower layer to create a mechanism that displays images from the inner mirror camera assembly in the mirror surface.
*: A phenomenon wherein a material is colorless while voltage is not applied, but achieves coloration due to an electrochemical reduction-oxidation reaction when voltage is applied.
| *1 | EC Mirror Cell | - | - |
| *a | Glass | *b | Transparent Electrode Film |
| *c | Liquid Type Electrochromic Material | *d | Metal Reflective Electro-conductive Film |
| *e | LCD Screen | *f | Guided Light Plate (Back-up Light) |
The digital rear-view mirror combines the automatic anti-glare EC mirror with the LCD screen that displays the images captured by the inner mirror camera assembly.
| *1 | Point Light Source (PLS) Indicator | *2 | Camera Indicator (Normal) |
| *3 | Camera Indicator (Malfunctioning) | *4 | High Mirror Temperature Indicator |
| *5 | Icons Display Area | *6 | Switching Lever |
| *7 | Left Direction Operation Switch | *8 | Right Direction Operation Switch |
| *9 | MENU/OK Switch | - | - |
When the MENU/OK switch is pressed while in digital mirror mode, the adjustment icons are displayed.
| Icon No. | Function |
|---|---|
| *1 | The automatic anti-glare function can be turned on and off. |
| *2 | The brightness of the digital rear-view mirror screen can be adjusted. |
| *3 | The display image can be adjusted up and down. |
| *4 | The display image can be adjusted left and right. |
| *5 | The angle of the display image can be adjusted. |
| *6 | The display image can be zoomed in and out. |
| *7 | PLS mode can be turned on and off. When PLS mode is turned on, the brightness of the display at night is reduced, suppressing the glare from the headlights of vehicles to the rear. Also, the PLS indicator is displayed in the top left of the digital inner mirror screen. |
| *8 | The adjustment icon display disappears. |
The height of the digital rear-view mirror can be adjusted according to driving posture. Hold the mirror and adjust the height up and down.
A sensor that detects rearward light and a sensor that detects surrounding light are built into the digital rear-view mirror.
| *1 | Rearward Light Detection Sensor (Positioned towards Rear) | *2 | Surrounding Light Detection Sensor (Positioned towards Front) |