Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › SLIDING ROOF SYSTEM
NM3620E _59 Vehicle Exterior _076266 SLIDING ROOF / CONVERTIBLE _0377671 SLIDING ROOF SYSTEM CO CONTROL F

SLIDING ROOF / CONVERTIBLE  SLIDING ROOF SYSTEM  CONTROL  SLIDING ROOF CONTROL  


SYSTEM CONTROL


a.

The sliding roof system has the following functions:

Function Outline
Manual Open-and-close Opens and closes the sliding roof when the OPEN switch or CLOSE switch is pressed for less than 0.3 seconds. The sliding roof stops as soon as the switch is released.
One-touch Auto Open Opens the sliding roof up to the fully opened position when the OPEN switch is pressed for 0.3 seconds or more.
One-touch Auto Close Fully closes the sliding roof when the CLOSE switch is pressed for 0.3 seconds or more.
Manual Tilt Up-and-down Tilts the sliding roof up or down when the UP switch or DOWN switch is pressed for less than 0.3 seconds. The sliding roof stops as soon as the switch is released.
One-touch Auto Tilt Up-and-down Fully tilts the sliding roof up or down when the UP switch or DOWN switch is pressed for 0.3 seconds or more.
Jam Protection The jam protection function automatically stops the sliding roof and opens or tilt up it almost fully if a foreign object gets jammed in the sliding roof during close or tilt down operation.
Key Off Operation
·

The key off operation function makes it possible to operate the sliding roof for approximately 45 seconds after the power switch (HV models) or engine switch (gasoline models) has been turned from on (IG) to on (ACC) or off, if either door is not opened.

·

When 45 seconds have elapsed or the driver door is opened during a key off operation function operation, the sliding roof keeps operating until the sliding roof operation is completed.


Key-linked Operation*1
·

When the driver door key cylinder is turned and held in the unlock position for 2.5 seconds or more, the sliding roof control ECU activates the sliding roof motor to open the sliding roof while the key cylinder is turned.

·

Similarly, turning and holding the driver door key cylinder in the lock position will cause the sliding roof to close.


Transmitter-linked Operation*1, *2
·

When the certification ECU receives an unlock signal from the key continuously for 4 seconds or more, the sliding roof control ECU opens the sliding roof.

·

Similarly, when the certification ECU receives a lock signal from the key continuously for 4 seconds or more, the sliding roof control ECU closes the sliding roof.


Sliding Roof Open Warning When the power switch (HV models) or engine switch (gasoline models) is turned from on (IG) to off and the driver door is opened with the sliding roof open, a warning message appears on the multi-information display.

HINT:

*1: Customizable parameters can be configured by means of the customized body electronics system. For details, refer to the Repair Manual.

*2: Except destination package for Korea



b.

Jam Protection Function

i.

To control the jam protection function, the sliding roof ECU monitors the amount of movement and judges jamming of the sliding roof based on the pulse signals from Hall IC and the movement direction of the sliding roof from the magnetic fields.

V103457E03
0.177,0.906 1.354,1.229 1.177,0.323 10 false Hall IC Signal 1.479,1.042 1.708,1.25 0.229,0.208 10 false LO 1.896,1.427 2.583,1.719 0.688,0.292 10 false Normal 5.5,0.938 6.188,1.229 0.688,0.292 10 false Jammed 5.625,1.917 6.51,2.229 0.885,0.313 10 false Motor Lock 1.5,0.771 1.729,0.979 0.229,0.208 10 false HI 4.521,1.25 4.75,1.458 0.229,0.208 10 false HI 4.51,1.531 4.74,1.74 0.229,0.208 10 false LO 4.521,0.563 4.75,0.771 0.229,0.208 10 false LO 4.542,0.281 4.771,0.49 0.229,0.208 10 false HI 3.521,0.385 4.698,0.708 1.177,0.323 10 false Hall IC Signal 3.552,1.375 4.729,1.698 1.177,0.323 10 false Hall IC Signal




DIAGNOSIS


a.

If a sliding roof ECU detects a malfunction in the sliding roof control system, a Diagnostic Trouble Code (DTC) is stored in memory.

i.

The DTCs can be read using the Global TechStream (GTS). For details, refer to the Repair Manual.