Home › Drivetrain › GF2A (TRANSFER / 4WD / AWD) › DYNAMIC TORQUE VECTORING AWD SYSTEM
NM3620E _52 Drivetrain _076479 GF2A TRANSFER / 4WD / AWD _0373339 DYNAMIC TORQUE VECTORING AWD SYSTEM DE DETAILS F

GF2A TRANSFER / 4WD / AWD  DYNAMIC TORQUE VECTORING AWD SYSTEM  DETAILS  DISCONNECT MECHANISM  


CONSTRUCTION


a.

Transfer

i.

The transfer disconnect mechanism is composed of a front dog clutch solenoid, cams, a ball, a holder, a piston and a clutch sleeve.


ii.

A dog clutch is used for the clutch structure. The drag torque is reduced when disconnected to help increase fuel efficiency.


iii.

When the dog clutch is engaged, the drive force from the transaxle is transmitted from the input shaft to the clutch sleeve, and then output from the ring gear to the propeller shaft.

HINT:

The transfer assembly is a non-disassembly type part. If replacing, replace the entire transfer assembly. Refer to the Repair Manual for details.


X142402C01
2.25,0.75 2.417,0.75 2.417,0.75 3,2.167 true 1.25,2.083 1.5,2.083 1.5,2.083 1.979,3.177 true 0.917,2.583 1.167,2.583 1.167,2.583 1.5,3.333 true 6.083,2.167 5.917,2.167 5.917,2.167 5.417,2.615 true 5.083,2 4.917,2 4.917,2 4.563,3.177 true 0.917,3.75 1.167,3.75 1.167,3.75 1.406,3.594 true 1.833,1.417 2.083,1.417 2.083,1.417 2.594,2.906 true 2.104,0.667 2.417,0.823 0.313,0.156 10 false *1 1.083,2.01 1.396,2.167 0.313,0.156 10 false *2 0.75,2.5 1.063,2.656 0.313,0.156 10 false *3 2,4.031 2.313,4.188 0.313,0.156 10 false *5 4.281,4.01 4.594,4.167 0.313,0.156 10 false *6 6.594,4.021 6.906,4.177 0.313,0.156 10 false *7 6.115,2.094 6.427,2.25 0.313,0.156 10 false *8 5.094,1.917 5.406,2.073 0.313,0.156 10 false *9 5.385,0.292 5.698,0.448 0.313,0.156 10 false *10 0.771,3.667 1.083,3.823 0.313,0.156 10 false *4 1.677,1.323 1.99,1.479 0.313,0.156 10 false *a
*1 Ring Gear *2 Clutch Sleeve
*3 Return Spring *4 Input Shaft
*5 Piston *6 Holder
*7 Cam No. 2 *8 Front Dog Clutch Solenoid
*9 Ball *10 Cam No. 1
*a Dog Clutch - -




b.

Differential

i.

The differential disconnect mechanism is composed of a rear dog clutch solenoid, cams, balls, a piston, a holder and a clutch sleeve. A synchronizer mechanism is also used to synchronizes the rotations of the front and rear wheels.


ii.

A dog clutch is used for the clutch structure. The drag torque is reduced when disconnected to help increase fuel efficiency.


iii.

When the dog clutch is engaged, the drive force from the propeller shaft is transmitted to the differential ring gear, and then output from the clutch sleeve to the differential disconnect shaft.

HINT:

The differential assembly is a non-disassembly type part. If replacing, replace the entire differential assembly. Refer to the Repair Manual for details.


X142403C02
1.833,0.75 2,0.75 2,0.75 2.521,2.094 true 1.073,1.583 1.24,1.583 1.24,1.583 2.063,2.99 true 0.792,2.594 1.042,2.594 1.042,2.594 1.49,3.219 true 6.333,2 6.167,2 6.167,2 5.417,2.583 true 5,2 4.833,2 4.833,2 4.552,3.177 true 1.333,1.167 1.5,1.167 1.5,1.167 2,2.333 true 0.833,3.75 1.25,3.75 1.25,3.75 1.417,3.583 true 0.917,2 1.083,2 1.083,2 1.5,2.958 true 0.833,3.417 1.417,3.417 true 1.688,0.677 2,0.833 0.313,0.156 10 false *1 0.927,1.49 1.24,1.646 0.313,0.156 10 false *a 0.656,2.531 0.969,2.688 0.313,0.156 10 false *3 1.969,4.052 2.281,4.208 0.313,0.156 10 false *6 4.25,4.031 4.563,4.188 0.313,0.156 10 false *7 6.594,4.021 6.906,4.177 0.313,0.156 10 false *8 6.365,1.938 6.677,2.094 0.313,0.156 10 false *9 5.01,1.927 5.323,2.083 0.313,0.156 10 false *10 5.385,0.292 5.698,0.448 0.313,0.156 10 false *11 0.677,3.344 0.99,3.5 0.313,0.156 10 false *4 1.177,1.094 1.49,1.25 0.313,0.156 10 false *2 0.677,3.677 1.01,3.833 0.333,0.156 10 false *5 0.771,1.917 1.083,2.073 0.313,0.156 10 false *b
*1 Drive Pinion *2 Differential Ring Gear
*3 Clutch Sleeve *4 Return Spring
*5 Differential Disconnect Shaft *6 Piston
*7 Holder *8 Cam No. 2
*9 Rear Dog Clutch Solenoid *10 Ball
*11 Cam No. 1 - -
*a Synchronizer Mechanism *b Dog Clutch





OPERATION


a.

Transfer

i.

Disconnected to Connected

·

When drive current is output from the 4WD ECU assembly, the dog clutch solenoid attracts the armature, suppressing the rotation of the cam No. 2 attached to the armature and creating a rotational difference between the cam No. 2 and cam No. 1.

·

The rotational difference between the cam No. 2 and cam No. 1 causes the ball to expand the gap between the cam and piston. As a result, the cam No. 1 pushes up the piston in the holder together with the clutch sleeve.

·

When the drive current from the 4WD ECU assembly stops, the piston and clutch sleeve are pushed back due to the force of the return spring. At this time, the position of the piston returning to the holder becomes misaligned, increasing the amount that the piston and clutch sleeve return. As a result, the dog clutch attaches and the connection completes.

Disconnected to Solenoid ON
X142931C01
1.802,2.635 1.49,1.865 1.49,1.865 1.323,1.865 true 2.75,1.583 2.417,0.917 2.417,0.917 2.25,0.917 true 1.198,3 1,3.5 1,3.5 0.917,3.5 true 2.51,2.896 2.167,3.5 2.167,3.5 2,3.5 true 3.135,2.927 2.917,3.51 2.917,3.51 2.75,3.51 true 4.094,2.969 3.917,3.5 3.917,3.5 3.833,3.5 true 4.49,2.948 4.583,3.5 4.583,3.5 4.667,3.5 true 4.25,2.667 4.333,1.417 4.333,1.417 4.5,1.417 true 5.167,2.167 5.583,1.75 5.583,1.75 5.667,1.75 true 4.573,1.979 5,1.5 5,1.5 5.083,1.5 true 0.708,2.771 1.208,2.771 true 2.104,0.844 2.417,1 0.313,0.156 10 false *1 1.167,1.76 1.479,1.917 0.313,0.156 10 false *2 0.563,2.688 0.875,2.844 0.313,0.156 10 false *3 0.771,3.417 1.083,3.573 0.313,0.156 10 false *4 1.844,3.417 2.156,3.573 0.313,0.156 10 false *5 2.583,3.427 2.896,3.583 0.313,0.156 10 false *6 3.698,3.417 4.01,3.573 0.313,0.156 10 false *7 4.646,2.729 4.76,2.917 0.115,0.188 10 true A 5.688,1.677 6,1.833 0.313,0.156 10 false *9 4.5,1.323 4.969,1.479 0.469,0.156 10 false *11 4.677,3.417 4.99,3.573 0.313,0.156 10 false *8 3.875,2.719 4,2.917 0.125,0.198 10 true A 4.771,0.167 5.083,0.323 0.313,0.156 10 false *a 5.083,1.417 5.552,1.573 0.469,0.156 10 false *10
*1 Ring Gear *2 Clutch Sleeve
*3 Return Spring *4 Input Shaft
*5 Piston *6 Holder
*7 Cam No. 1 *8 Cam No. 2
*9 Front Dog Clutch Solenoid *10 Armature
*11 Ball - -
*a A - A Cross Section - -


Solenoid OFF to Connected
X142932C02
1.813,2.583 1.479,1.917 1.479,1.917 1.417,1.917 true 2.75,1.583 2.417,0.917 2.417,0.917 2.333,0.917 true 1.25,3.021 0.917,3.5 0.917,3.5 0.833,3.5 true 2.719,2.792 2.417,3.5 2.417,3.5 2.333,3.5 true 3.219,2.896 3,3.5 3,3.5 2.917,3.5 true 4.188,2.927 4.021,3.5 4.021,3.5 3.917,3.5 true 4.563,2.917 4.667,3.5 4.667,3.5 4.75,3.5 true 4.333,2.583 4.417,1.417 4.417,1.417 4.5,1.417 true 5.25,2.094 5.667,1.833 5.667,1.833 5.75,1.833 true 4.667,1.875 5.083,1.5 5.083,1.5 5.167,1.5 true 2.5,2.333 2,1.417 2,1.417 1.917,1.417 true 0.833,2.75 1.25,2.75 true 2.188,0.844 2.5,1 0.313,0.156 10 false *1 1.292,1.833 1.604,1.99 0.313,0.156 10 false *2 0.688,2.677 1,2.833 0.313,0.156 10 false *3 0.677,3.438 0.99,3.594 0.313,0.156 10 false *4 2.188,3.417 2.5,3.573 0.313,0.156 10 false *5 2.76,3.417 3.073,3.573 0.313,0.156 10 false *6 3.781,3.417 4.094,3.573 0.313,0.156 10 false *7 4.792,3.417 5.104,3.573 0.313,0.156 10 false *8 5.76,1.76 6.073,1.917 0.313,0.156 10 false *9 4.521,1.344 4.99,1.5 0.469,0.156 10 false *11 4.698,2.656 4.865,2.813 0.167,0.156 10 true A 3.958,2.677 4.083,2.844 0.125,0.167 10 true A 4.698,0.198 5.167,0.354 0.469,0.156 10 false *b 5.156,1.406 5.625,1.563 0.469,0.156 10 false *10 1.771,1.313 2.083,1.469 0.313,0.156 10 false *a
*1 Ring Gear *2 Clutch Sleeve
*3 Return Spring *4 Input Shaft
*5 Piston *6 Holder
*7 Cam No. 1 *8 Cam No. 2
*9 Front Dog Clutch Solenoid *10 Armature
*11 Ball - -
*a Dog Clutch *b A - A Cross Section


Clutch Sleeve, Holder and Piston Operation Details (Disconnected to Connected)
X142941C01
0.563,0.5 0.958,1.229 true 1.823,0.417 1.51,1.115 true 1.104,0.375 1.094,1.188 true 0.979,3.052 1.292,3.25 0.313,0.198 10 false *a 2.74,3.052 3.052,3.25 0.313,0.198 10 false *b 4.49,3.042 4.802,3.24 0.313,0.198 10 false *c 6.208,3.01 6.521,3.208 0.313,0.198 10 false *d 0.448,0.365 0.76,0.563 0.313,0.198 10 false *1 1.01,0.219 1.323,0.417 0.313,0.198 10 false *2 1.75,0.25 2.063,0.448 0.313,0.198 10 false *3
*1 Piston *2 Holder
*3 Cam No.1 - -
*a Disconnected *b Solenoid ON
*c Solenoid OFF *d Connected




ii.

Connected to Disconnected

·

When drive current is output from the 4WD ECU assembly, the dog clutch solenoid attracts the armature, suppressing the rotation of the cam No. 2 attached to the armature and creating a rotational difference between the cam No. 2 and cam No. 1.

·

The rotational difference between the cam No. 2 and cam No. 1 causes the ball to expand the gap between the cam and piston. As a result, the cam No. 1 pushes up the piston in the holder together with the clutch sleeve, detaching the dog clutch.

·

When the drive current from the 4WD ECU assembly stops, the piston and clutch sleeve are pushed back due to the force of the return spring. At this time, the position of the piston returning to the holder becomes misaligned, keeping the dog clutch detached and completing the disconnection.

Connected to Solenoid ON
X142935C02
1.875,2.604 1.5,1.917 1.5,1.917 1.417,1.917 true 2.781,1.615 2.417,0.917 2.417,0.917 2.333,0.917 true 1.25,3.031 0.917,3.5 0.917,3.5 0.833,3.5 true 2.75,2.865 2.417,3.5 2.417,3.5 2.333,3.5 true 3.271,2.906 3.083,3.5 3.083,3.5 3,3.5 true 4.313,2.979 4.167,3.5 4.167,3.5 4.083,3.5 true 4.583,2.958 4.667,3.5 4.667,3.5 4.75,3.5 true 4.344,2.625 4.5,1.5 4.5,1.5 4.583,1.5 true 5.313,2.073 5.667,1.917 5.667,1.917 5.75,1.917 true 4.667,1.917 5.167,1.5 5.167,1.5 5.25,1.5 true 2.552,2.365 2,1.333 2,1.333 1.917,1.333 true 0.823,2.771 1.24,2.771 true 2.208,0.844 2.521,1 0.313,0.156 10 false *1 1.281,1.823 1.594,1.979 0.313,0.156 10 false *2 0.677,2.688 0.99,2.844 0.313,0.156 10 false *3 0.677,3.417 0.99,3.573 0.313,0.156 10 false *4 2.188,3.417 2.5,3.573 0.313,0.156 10 false *5 2.854,3.427 3.167,3.583 0.313,0.156 10 false *6 3.948,3.417 4.26,3.573 0.313,0.156 10 false *7 4.771,3.427 5.083,3.583 0.313,0.156 10 false *8 5.771,1.833 6.083,1.99 0.313,0.156 10 false *9 4.625,1.448 5.094,1.604 0.469,0.156 10 false *11 4.74,2.708 4.885,2.896 0.146,0.188 10 true A 4,2.708 4.115,2.906 0.115,0.198 10 true A 4.75,0.208 5.063,0.365 0.313,0.156 10 false *b 5.271,1.427 5.74,1.583 0.469,0.156 10 false *10 1.781,1.229 2.094,1.385 0.313,0.156 10 false *a
*1 Ring Gear *2 Clutch Sleeve
*3 Return Spring *4 Input Shaft
*5 Piston *6 Holder
*7 Cam No.1 *8 Cam No.2
*9 Front Dog Clutch Solenoid *10 Armature
*11 Ball - -
*a Dog Clutch *b A - A Cross Section


Solenoid OFF to Disconnected
X142936C02
1.823,2.625 1.5,2 1.5,2 1.417,2 true 2.75,1.583 2.417,0.917 2.417,0.917 2.333,0.917 true 1.25,3.031 0.917,3.5 0.917,3.5 0.833,3.5 true 2.583,2.792 2.333,3.5 2.333,3.5 2.25,3.5 true 3.156,2.885 2.917,3.5 2.917,3.5 2.833,3.5 true 4.219,2.969 4,3.5 4,3.5 3.917,3.5 true 4.469,2.958 4.583,3.5 4.583,3.5 4.667,3.5 true 4.25,2.667 4.333,1.417 4.333,1.417 4.417,1.417 true 5.24,2.063 5.667,1.833 5.667,1.833 5.75,1.833 true 4.583,1.896 5.083,1.5 5.083,1.5 5.167,1.5 true 0.833,2.781 1.167,2.781 true 2.208,0.844 2.521,1 0.313,0.156 10 false *1 1.281,1.917 1.594,2.073 0.313,0.156 10 false *2 0.708,2.719 1.021,2.875 0.313,0.156 10 false *3 0.677,3.427 0.99,3.583 0.313,0.156 10 false *4 2.104,3.417 2.417,3.573 0.313,0.156 10 false *5 2.688,3.427 3,3.583 0.313,0.156 10 false *6 3.781,3.438 4.094,3.594 0.313,0.156 10 false *7 4.677,3.417 4.99,3.573 0.313,0.156 10 false *8 5.76,1.76 6.073,1.917 0.313,0.156 10 false *9 4.438,1.354 4.906,1.51 0.469,0.156 10 false *11 4.646,2.708 4.771,2.917 0.125,0.208 10 true A 3.917,2.719 4.042,2.927 0.125,0.208 10 true A 4.781,0.188 5.25,0.344 0.469,0.156 10 false *a 5.198,1.427 5.667,1.583 0.469,0.156 10 false *10
*1 Ring Gear *2 Clutch Sleeve
*3 Return Spring *4 Input Shaft
*5 Piston *6 Holder
*7 Cam No.1 *8 Cam No.2
*9 Front Dog Clutch Solenoid *10 Armature
*11 Ball - -
*a A - A Cross Section - -


Clutch Sleeve, Holder and Piston Operation Details (Connected to Disconnected)
X142940C01
0.594,0.51 0.99,1.24 true 1.771,0.438 1.427,1.25 true 1.083,0.417 1.083,1.25 true 1.104,3.042 1.417,3.24 0.313,0.198 10 false *a 2.781,3.021 3.094,3.219 0.313,0.198 10 false *b 4.49,3.031 4.802,3.229 0.313,0.198 10 false *c 6.208,3.031 6.521,3.229 0.313,0.198 10 false *d 0.458,0.375 0.771,0.573 0.313,0.198 10 false *1 1.01,0.24 1.323,0.438 0.313,0.198 10 false *2 1.708,0.271 2.021,0.469 0.313,0.198 10 false *3
*1 Piston *2 Holder
*3 Cam No.1 - -
*a Connected *b Solenoid ON
*c Solenoid OFF *d Disconnected





b.

Differential

i.

Disconnected to Connected

·

When drive current is output from the 4WD ECU assembly, the dog clutch solenoid attracts the armature, suppressing the rotation of the cam No. 2 attached to the armature and creating a rotational difference between the cam No. 2 and cam No. 1.

·

The rotational difference between the cam No. 2 and cam No. 1 causes the ball to expand the gap between the cam and piston. As a result, the cam No. 1 pushes up the piston in the holder together with the clutch sleeve. At this time, the synchronizer mechanism synchronizes the rotations of the differential ring gear and differential disconnect shaft, supporting the attachment of the dog clutch.

·

When the drive current from the 4WD ECU assembly stops, the piston and clutch sleeve are pushed back due to the force of the return spring. At this time, the position of the piston returning to the holder becomes misaligned, increasing the amount that the piston and clutch sleeve return. As a result, the dog clutch attaches and the connection completes.

Disconnected to Solenoid ON
X142933C01
1.167,1.083 1.25,1.083 1.25,1.083 1.667,1.74 true 1.063,1.625 1.146,1.625 1.146,1.625 1.948,2.292 true 0.75,2.333 0.833,2.333 0.833,2.333 1.167,2.667 true 0.771,3.417 0.854,3.417 0.854,3.417 1.104,3.063 true 2.167,3.5 2.25,3.5 2.25,3.5 2.5,2.896 true 3.833,3.5 3.917,3.5 3.917,3.5 4.167,2.979 true 4.667,3.5 4.583,3.5 4.583,3.5 4.438,2.99 true 5.75,2.083 5.667,2.083 5.667,2.083 5.167,2.333 true 2.917,3.5 2.969,3.5 2.969,3.5 3.135,2.917 true 4.833,1.583 4.667,1.583 4.667,1.583 4.5,1.917 true 0.75,2.833 1.167,2.833 true 4.292,3.5 4.292,2.917 true 1.042,1.01 1.354,1.167 0.313,0.156 10 false *1 0.604,2.26 0.917,2.417 0.313,0.156 10 false *2 0.583,2.75 0.896,2.906 0.313,0.156 10 false *3 0.594,3.333 0.906,3.49 0.313,0.156 10 false *4 2.01,3.438 2.323,3.594 0.313,0.156 10 false *5 2.76,3.417 3.073,3.573 0.313,0.156 10 false *6 3.698,3.427 4.01,3.583 0.313,0.156 10 false *7 4.667,3.427 4.979,3.583 0.313,0.156 10 false *9 4.75,0.177 5.115,0.448 0.365,0.271 10 false *b 4.656,2.719 4.781,2.885 0.125,0.167 10 true A 3.875,2.729 4,2.896 0.125,0.167 10 true A 0.917,1.531 1.281,1.802 0.365,0.271 10 false *a 5.75,2 6.063,2.156 0.313,0.156 10 false *10 4.854,1.51 5.167,1.667 0.313,0.156 10 false *11 4.219,3.5 4.531,3.656 0.313,0.156 10 false *8
*1 Differential Ring Gear *2 Clutch Sleeve
*3 Return Spring *4 Differential Disconnect Shaft
*5 Piston *6 Holder
*7 Cam No. 1 *8 Ball
*9 Cam No. 2 *10 Rear Dog Clutch Solenoid
*11 Armature - -
*a Synchronizer Mechanism *b A - A Cross Section


Solenoid OFF to Connected
X142934C03
1.385,0.719 1.469,0.719 1.469,0.719 1.823,1.698 true 0.75,2.083 0.833,2.083 0.833,2.083 1.375,2.698 true 0.729,3.344 0.833,3.333 0.833,3.333 1.167,3 true 2.833,3.5 3,3.5 3,3.5 3.229,2.844 true 4,3.5 4.083,3.5 4.083,3.5 4.26,2.917 true 4.677,3.49 4.594,3.49 4.594,3.49 4.51,2.906 true 5.833,2 5.75,2 5.75,2 5.25,2.271 true 1.25,1.167 1.333,1.167 1.333,1.167 1.99,2.354 true 2.333,3.5 2.417,3.5 2.417,3.5 2.75,2.813 true 4.917,1.5 4.75,1.5 4.75,1.5 4.583,1.854 true 0.781,1.563 0.865,1.563 0.865,1.563 1.375,2.417 true 0.646,2.771 1.229,2.771 true 4.375,2.833 4.375,3.5 true 1.25,0.625 1.563,0.781 0.313,0.156 10 false *1 0.604,2.021 0.917,2.177 0.313,0.156 10 false *2 0.521,2.688 0.833,2.844 0.313,0.156 10 false *3 0.604,3.25 0.917,3.406 0.313,0.156 10 false *4 2.188,3.417 2.5,3.573 0.313,0.156 10 false *5 2.688,3.427 3,3.583 0.313,0.156 10 false *6 3.844,3.417 4.156,3.573 0.313,0.156 10 false *7 4.698,3.406 5.01,3.563 0.313,0.156 10 false *9 5.885,1.927 6.198,2.083 0.313,0.156 10 false *10 1.104,1.083 1.417,1.24 0.313,0.156 10 false *a 4.771,0.177 5.083,0.333 0.313,0.156 10 false *c 4.698,2.677 4.823,2.833 0.125,0.156 10 true A 3.948,2.646 4.073,2.802 0.125,0.156 10 true A 4.917,1.427 5.229,1.583 0.313,0.156 10 false *11 0.635,1.469 0.948,1.625 0.313,0.156 10 false *b 4.292,3.51 4.604,3.667 0.313,0.156 10 false *8
*1 Differential Ring Gear *2 Clutch Sleeve
*3 Return Spring *4 Differential Disconnect Shaft
*5 Piston *6 Holder
*7 Cam No. 1 *8 Ball
*9 Cam No. 2 *10 Rear Dog Clutch Solenoid
*11 Armature - -
*a Synchronizer Mechanism *b Dog Clutch
*c A - A Cross Section - -


Clutch Sleeve, Holder and Piston Operation Details (Disconnected to Connected)
X142941C01
0.563,0.5 0.958,1.229 true 1.823,0.417 1.51,1.115 true 1.104,0.375 1.094,1.188 true 0.979,3.052 1.292,3.25 0.313,0.198 10 false *a 2.74,3.052 3.052,3.25 0.313,0.198 10 false *b 4.49,3.042 4.802,3.24 0.313,0.198 10 false *c 6.208,3.01 6.521,3.208 0.313,0.198 10 false *d 0.448,0.365 0.76,0.563 0.313,0.198 10 false *1 1.01,0.219 1.323,0.417 0.313,0.198 10 false *2 1.75,0.25 2.063,0.448 0.313,0.198 10 false *3
*1 Piston *2 Holder
*3 Cam No.1 - -
*a Disconnected *b Solenoid ON
*c Solenoid OFF *d Connected




ii.

Connected to Disconnected

·

When drive current is output from the 4WD ECU assembly, the dog clutch solenoid attracts the armature, suppressing the rotation of the cam No. 2 attached to the armature and creating a rotational difference between the cam No. 2 and cam No. 1.

·

The rotational difference between the cam No. 2 and cam No. 1 causes the ball to expand the gap between the cam No. 1 and cam No. 2. As a result, the cam No. 1 pushes up the piston in the holder together with the clutch sleeve, detaching the dog clutch.

·

When the drive current from the 4WD ECU assembly stops, the piston and clutch sleeve are pushed back due to the force of the return spring. At this time, the position of the piston returning to the holder becomes misaligned, keeping the dog clutch detached and completing the disconnection.

Connected to Solenoid ON
X142937C01
1.417,1 1.5,1 1.5,1 1.75,1.635 true 1.167,1.24 1.25,1.24 1.25,1.24 2.021,2.333 true 0.75,2.25 0.833,2.25 0.833,2.25 1.375,2.698 true 0.677,2.802 1.177,2.802 true 0.833,3.333 0.917,3.333 0.917,3.333 1.313,3.01 true 2.417,3.5 2.5,3.5 2.5,3.5 2.75,2.833 true 2.917,3.5 3,3.5 3,3.5 3.24,2.906 true 4.083,3.5 4.167,3.5 4.167,3.5 4.281,2.938 true 4.75,3.5 4.583,3.5 4.583,3.5 4.51,2.927 true 5.917,2 5.833,2 5.833,2 5.25,2.302 true 4.917,1.5 4.833,1.5 4.833,1.5 4.573,1.823 true 0.833,1.833 0.917,1.833 0.917,1.833 1.365,2.417 true 4.385,2.854 4.385,3.552 true 1.281,0.917 1.604,1.073 0.323,0.156 10 false *1 0.604,2.167 0.917,2.323 0.313,0.156 10 false *2 0.531,2.74 0.844,2.896 0.313,0.156 10 false *3 0.656,3.26 0.969,3.417 0.313,0.156 10 false *4 2.25,3.417 2.563,3.573 0.313,0.156 10 false *5 2.771,3.417 3.083,3.573 0.313,0.156 10 false *6 3.938,3.427 4.25,3.583 0.313,0.156 10 false *7 4.76,3.417 5.073,3.573 0.313,0.156 10 false *9 5.938,1.938 6.25,2.094 0.313,0.156 10 false *10 1.021,1.146 1.333,1.302 0.313,0.156 10 false *a 4.75,0.115 5.063,0.271 0.313,0.156 10 false *c 3.99,2.688 4.094,2.844 0.104,0.156 10 true A 4.708,2.688 4.813,2.844 0.104,0.156 10 true A 4.917,1.417 5.385,1.573 0.469,0.156 10 false *11 0.677,1.75 0.99,1.906 0.313,0.156 10 false *b 4.313,3.542 4.625,3.698 0.313,0.156 10 false *8
*1 Differential Ring Gear *2 Clutch Sleeve
*3 Return Spring *4 Differential Disconnect Shaft
*5 Piston *6 Holder
*7 Cam No.1 *8 Ball
*9 Cam No.2 *10 Rear Dog Clutch Solenoid
*11 Armature - -
*a Synchronizer Mechanism *b Dog Clutch
*c A - A Cross Section - -


Solenoid OFF to Disconnected
X142938C01
1.083,1.083 1.167,1.083 1.167,1.083 1.75,1.583 true 1.167,1.5 1.333,1.5 1.333,1.5 2,2.25 true 0.917,2.167 1,2.167 1,2.167 1.313,2.563 true 0.917,3.333 1,3.333 1,3.333 1.25,3.01 true 0.833,2.781 1.25,2.781 true 2.333,3.5 2.417,3.5 2.417,3.5 2.656,2.823 true 3,3.5 3.083,3.5 3.083,3.5 3.25,2.854 true 4.073,3.5 4.156,3.5 4.156,3.5 4.302,2.927 true 4.75,3.5 4.583,3.5 4.583,3.5 4.563,2.927 true 5.833,2 5.729,2 5.729,2 5.313,2.313 true 4.917,1.5 4.833,1.5 4.833,1.5 4.604,1.833 true 4.427,2.854 4.417,3.5 true 0.958,1 1.271,1.167 0.313,0.167 10 false *1 0.76,2.094 1.073,2.25 0.313,0.156 10 false *2 0.708,2.698 1.021,2.854 0.313,0.156 10 false *3 0.781,3.26 1.094,3.417 0.313,0.156 10 false *4 2.167,3.427 2.479,3.583 0.313,0.156 10 false *5 2.844,3.406 3.156,3.563 0.313,0.156 10 false *6 3.917,3.427 4.229,3.583 0.313,0.156 10 false *7 4.75,3.417 5.073,3.583 0.323,0.167 10 false *9 5.833,1.917 6.146,2.073 0.313,0.156 10 false *10 1,1.427 1.313,1.583 0.313,0.156 10 false *a 4.74,0.167 5.052,0.323 0.313,0.156 10 false *b 3.99,2.646 4.104,2.833 0.115,0.188 10 true A 4.76,2.635 4.854,2.813 0.094,0.177 10 true A 4.938,1.427 5.406,1.583 0.469,0.156 10 false *11 4.313,3.5 4.781,3.656 0.469,0.156 10 false *8
*1 Differential Ring Gear *2 Clutch Sleeve
*3 Return Spring *4 Differential Disconnect Shaft
*5 Piston *6 Holder
*7 Cam No.1 *8 Ball
*9 Cam No.2 *10 Rear Dog Clutch Solenoid
*11 Armature - -
*a Synchronizer Mechanism *b A - A Cross Section


Clutch Sleeve, Holder and Piston Operation Details (Connected to Disconnected)
X142940C01
0.594,0.51 0.99,1.24 true 1.771,0.438 1.427,1.25 true 1.083,0.417 1.083,1.25 true 1.104,3.042 1.417,3.24 0.313,0.198 10 false *a 2.781,3.021 3.094,3.219 0.313,0.198 10 false *b 4.49,3.031 4.802,3.229 0.313,0.198 10 false *c 6.208,3.031 6.521,3.229 0.313,0.198 10 false *d 0.458,0.375 0.771,0.573 0.313,0.198 10 false *1 1.01,0.24 1.323,0.438 0.313,0.198 10 false *2 1.708,0.271 2.021,0.469 0.313,0.198 10 false *3
*1 Piston *2 Holder
*3 Cam No.1 - -
*a Connected *b Solenoid ON
*c Solenoid OFF *d Disconnected