Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › PANORAMIC MOON ROOF SYSTEM
NM3620E _59 Vehicle Exterior _076266 SLIDING ROOF / CONVERTIBLE _0377693 PANORAMIC MOON ROOF SYSTEM CO CONTROL F

SLIDING ROOF / CONVERTIBLE  PANORAMIC MOON ROOF SYSTEM  CONTROL  PANORAMIC MOON ROOF CONTROL  


SYSTEM CONTROL


a.

The panoramic moon roof system has the following functions:

Panoramic Moon Roof
Function Outline
Manual Open-and-close Opens (or closes) the panoramic moon roof when the roof open/close/vent switch is slid backward (or forward) for less than 0.3 seconds. The panoramic moon roof stops as soon as the switch is released.
One-touch Auto Open Opens the panoramic moon roof to the fully opened position when the open/close/vent switch is slid backward for 0.3 seconds or more.
One-touch Auto Close Closes the panoramic moon roof to the closed position when the roof open/close/vent switch is slid forward for 0.3 seconds or more.
Manual Tilt Up Tilts the panoramic moon roof up when the open/close/vent switch is pressed for less than 0.3 seconds. The panoramic moon roof stops as soon as the switch is released.
Manual Tilt Down Tilts the panoramic moon roof down when the vent switch is pressed or the roof close switch or shade open/close switch is slid forward for less than 0.3 seconds. The panoramic moon roof stops as soon as the switch is released.
One-touch Auto Tilt Up Tilts the panoramic moon roof up when the vent switch is pressed for 0.3 seconds or more.
One-touch Auto Tilt Down Tilts the panoramic moon roof down when the vent switch is pressed for 0.3 seconds or more.
Jam Protection Automatically stops the panoramic moon roof and moves it to the halfway open position (or fully tilted-up position) if foreign matter gets jammed in the panoramic moon roof during a close or tilt down operation.
Key Off Operation Key off operation function makes it possible to operate the panoramic moon roof for approximately 45 seconds after the power switch (HV models) or the engine switch (gasoline models) has been turned from on (IG) to on (ACC) or off, if either front door is not opened.
Key-linked Operation*1
·

When the driver door key cylinder is turned and held in the unlock position for 2.5 seconds or more, the sliding roof control ECU activates the sliding roof motor to open the panoramic moon roof while the key cylinder is turned.

·

Similarly, turning and holding the driver door key cylinder in the lock position will cause the panoramic moon roof to close.


Transmitter-linked Operation*1, *2
·

When the certification ECU receives an unlock signal from the key continuously for 4 seconds or more, the sliding roof ECU opens the panoramic moon roof.

·

Similarly, when the certification ECU receives a lock signal from the key continuously for 4 seconds or more, the sliding roof ECU closes the panoramic moon roof.


Panoramic Moon Roof Open Warning When the power switch (HV models) or engine switch (gasoline models) is turned from on (IG) to off and the driver door is opened with the panoramic moon roof open, a warning message appears on the multi-information display.

HINT:

*1: Customizable parameters can be configured through customize settings. For details, refer to the Repair Manual.

*2: Except destination package for Korea


Roof Sunshade
Function Outline
Manual Open-and-close Opens (or closes) the roof sunshade when the shade open/close switch is slid backward (or forward) for less than 0.3 seconds. The roof sunshade stops as soon as the switch is released.
One-touch Auto Open Opens the roof sunshade to the fully opened position when the shade open/close switch is slid backward for 0.3 seconds or more.
One-touch Auto Close
·

When the panoramic moon roof is not fully closed, sliding the shade open/close switch forward for 0.3 seconds or more closes the roof sunshade to the half-opened position, simultaneously, the roof glass will close to the fully closed position. Then, the shade will close to the fully closed position.

·

When the panoramic moon roof is fully closed, sliding the shade open/close switch forward for 0.3 seconds or more fully closes the roof sunshade.


Jam Protection Automatically stops the roof sunshade and moves it to the halfway open or fully open position if foreign matter gets jammed in the roof sunshade during a close operation.
Key Off Operation Makes it possible to operate the roof sunshade for approximately 45 seconds after the power switch (HV models) or the engine switch (gasoline models) has been turned from on (IG) to on (ACC) or off, if either front door is not opened.


b.

Jam Protection Function

i.

To control the jam protection function, the sliding roof ECU monitors the amount of movement and judges jamming of the panoramic moon roof based on the pulse signal from Hall IC and the movement direction of the panoramic moon roof from the magnetic fields.

V103457E03
0.177,0.906 1.354,1.229 1.177,0.323 10 false Hall IC Signal 1.479,1.042 1.708,1.25 0.229,0.208 10 false LO 1.896,1.427 2.583,1.719 0.688,0.292 10 false Normal 5.5,0.938 6.188,1.229 0.688,0.292 10 false Jammed 5.625,1.917 6.51,2.229 0.885,0.313 10 false Motor Lock 1.5,0.771 1.729,0.979 0.229,0.208 10 false HI 4.521,1.25 4.75,1.458 0.229,0.208 10 false HI 4.51,1.531 4.74,1.74 0.229,0.208 10 false LO 4.521,0.563 4.75,0.771 0.229,0.208 10 false LO 4.542,0.281 4.771,0.49 0.229,0.208 10 false HI 3.521,0.385 4.698,0.708 1.177,0.323 10 false Hall IC Signal 3.552,1.375 4.729,1.698 1.177,0.323 10 false Hall IC Signal




OPERATION


a.

The panoramic moon roof and roof sunshade operate as follows:

Operating Condition When any open/close/vent or open/close switch is operated with either of the following conditions met:
·

Power switch (HV models) or engine switch (gasoline models) is on (IG).

·

Open/close/vent switch is operated after power switch (HV models) or engine switch (gasoline models) is turned from ON (IG) to ACC or off.



OPEN Switch (Open/Close/Vent Switch) Operation
No. Roof Glass Position Shade Position Operation
[1]
·

Fully closed position

·

Between fully closed position and fully tilted-up position


·

Fully closed position

·

Between fully closed position and half-opened position


1.

The shade will open to the fully opened position.

2.

Simultaneously, the roof glass will open to the fully opened position.


[2]
·

Half-opened position

·

Between half-opened position and fully opened position


[3] Fully opened position The roof glass will open to the fully opened position.
[4]
·

Fully tilted-up position

·

Between fully tilted-up position and fully opened position


·

Half-opened position

·

Between half-opened position and fully opened position


1.

The shade will open to the fully opened position.

2.

Simultaneously, the roof glass will open to the fully opened position.


[5] Fully opened position The roof glass will open to the fully opened position.

Y190200C02
0.938,0.115 1.25,0.271 0.313,0.156 10 false *a 3.635,0.125 3.948,0.281 0.313,0.156 10 false *b 6.354,0.104 6.667,0.26 0.313,0.156 10 false *c 0.104,0.594 0.417,0.75 0.313,0.156 10 false *d 0.104,1.969 0.417,2.125 0.313,0.156 10 false *e 0.125,3.375 0.438,3.531 0.313,0.156 10 false *f 1.094,1.021 1.438,1.313 0.344,0.292 10 false [1] 3.771,1.01 4.115,1.302 0.344,0.292 10 false [2] 6.5,1.01 6.844,1.302 0.344,0.292 10 false [3] 3.781,2.427 4.125,2.719 0.344,0.292 10 false [4] 6.875,2.448 7.083,2.792 0.208,0.344 10 false [5]
*a Shade Fully Closed *b Shade Half-opened
*c Shade Fully Opened *d Roof Glass Fully Closed
*e Roof Glass Fully Tilted-up *f Roof Glass Fully Opened
V100135

Automatic/Manual Operation - -


CLOSE Switch (Open/Close/Vent Switch) Operation
No. Roof Glass Position Shade Position Operation
[1]
·

Fully opened position

·

Between fully tilted-up position and fully opened position


·

Half-opened position

·

Between half-opened position and fully opened position


The roof glass will slide closed to the fully closed position.
[2]
·

Between fully closed position and fully tilted-up position

·

Fully tilted-up position


Entire range The roof glass will tilt down to the fully closed position.

Y190201C02
0.969,0.115 1.281,0.271 0.313,0.156 10 false *a 3.646,0.125 3.958,0.281 0.313,0.156 10 false *b 6.365,0.125 6.677,0.281 0.313,0.156 10 false *c 0.083,0.583 0.396,0.74 0.313,0.156 10 false *d 0.094,1.49 0.406,1.646 0.313,0.156 10 false *e 0.115,2.396 0.427,2.552 0.313,0.156 10 false *f 2.719,2.229 3.042,2.51 0.323,0.281 10 false [1] 5.448,2.229 5.771,2.51 0.323,0.281 10 false [1] 3.792,1.031 4.115,1.313 0.323,0.281 10 false [2] 6.521,1.031 6.844,1.313 0.323,0.281 10 false [2]
*a Shade Fully Closed *b Shade Half-opened
*c Shade Fully Opened *d Roof Glass Fully Closed
*e Roof Glass Fully Tilted-up *f Roof Glass Fully Opened
V100135

Automatic/Manual Operation - -


VENT Switch (Open/Close/Vent Switch) Operation
No. Roof Glass Position Shade Position Operation
[1]
·

Fully closed position

·

Between fully closed position and fully tilted-up position


·

Fully closed position

·

Between fully closed position and half-opened position


1.

The shade will open to the half-opened position.

2.

Simultaneously, the roof glass will open to the fully tilted-up position.


[2]
·

Half-opened position

·

Between half-opened position and fully opened position

·

Fully opened position


The roof glass will open to the fully tilted-up position.
[3]
·

Between fully tilted-up position and fully open position

·

Fully opened position


The roof glass will close to the fully tilted-up position.
[4] Fully tilted-up position The roof glass will close to the fully closed position.

Y190204C02
0.938,0.125 1.25,0.281 0.313,0.156 10 false *a 3.635,0.135 3.948,0.292 0.313,0.156 10 false *b 6.333,0.135 6.646,0.292 0.313,0.156 10 false *c 0.083,0.583 0.396,0.74 0.313,0.156 10 false *d 0.094,1.49 0.406,1.646 0.313,0.156 10 false *e 0.115,2.417 0.427,2.573 0.313,0.156 10 false *f 1.115,1.021 1.375,1.281 0.26,0.26 10 false [1] 3.49,1.01 3.75,1.271 0.26,0.26 10 false [2] 4.135,1.01 4.396,1.271 0.26,0.26 10 false [4] 6.802,1.021 7.063,1.281 0.26,0.26 10 false [4] 6.198,1.021 6.458,1.281 0.26,0.26 10 false [2] 2.781,2.198 3.042,2.458 0.26,0.26 10 false [3] 5.479,2.208 5.74,2.469 0.26,0.26 10 false [3]
*a Shade Fully Closed *b Shade Half-opened
*c Shade Fully Opened *d Roof Glass Fully Closed
*e Roof Glass Fully Tilted-up *f Roof Glass Fully Opened
V100135

Automatic/Manual Operation - -


OPEN Switch (Open/Close Switch) Operation
No. Roof Glass Position Shade Position Operation
[1] Entire range Entire range The shade will open to the fully opened position.

Y190202C02
0.938,0.115 1.25,0.271 0.313,0.156 10 false *a 3.646,0.125 3.958,0.281 0.313,0.156 10 false *b 6.344,0.125 6.656,0.281 0.313,0.156 10 false *c 0.094,0.563 0.406,0.719 0.313,0.156 10 false *d 0.094,1.5 0.406,1.656 0.313,0.156 10 false *e 0.115,2.385 0.427,2.542 0.313,0.156 10 false *f 1.802,0.635 2.135,0.906 0.333,0.271 10 false [1] 4.469,0.365 4.802,0.635 0.333,0.271 10 false [1] 4.469,0.667 4.802,0.938 0.333,0.271 10 false [1] 4.469,1.323 4.802,1.594 0.333,0.271 10 false [1] 4.469,2.219 4.802,2.49 0.333,0.271 10 false [1]
*a Shade Fully Closed *b Shade Half-opened
*c Shade Fully Opened *d Roof Glass Fully Closed
*e Roof Glass Fully Tilted-up *f Roof Glass Fully Opened
V100135

Automatic/Manual Operation - -


CLOSE Switch (Open/Close Switch) Operation
No. Roof Glass Position Shade Position Operation
[1]
·

Fully opened position

·

Between fully opened position and fully tilted-up position


·

Fully opened position

·

Between half-opened position and fully opened position


1.

The shade will close to the half-opened position.

2.

Simultaneously, the roof glass will close to the fully closed position.

3.

Then the shade will close to the fully closed position.


[2] Fully tilted-up position
1.

The shade will close to the half-opened position.

2.

Simultaneously, the roof glass will close to the fully closed position.

3.

Then the shade will close to the fully closed position.


[3] Between fully tilted-up position and fully opened position Half-opened position
1.

The roof glass will close to the fully closed position.

2.

Then the shade will close to the fully closed position.


[4]
·

Fully tilted-up position

·

Between fully closed position and fully tilted-up position


·

Half-opened position

·

Between fully closed position and half-opened position


1.

The roof glass will close to the fully closed position.

2.

Then the shade will close to the fully closed position.


[5] Fully closed position
·

Between fully closed position and fully opened position

·

Fully opened position


The shade will close to the fully closed position.

Y190203C02
0.969,0.135 1.281,0.292 0.313,0.156 10 false *a 3.677,0.135 3.99,0.292 0.313,0.156 10 false *b 6.365,0.146 6.677,0.302 0.313,0.156 10 false *c 0.104,0.75 0.417,0.906 0.313,0.156 10 false *d 0.115,2.198 0.427,2.354 0.313,0.156 10 false *e 0.115,3.385 0.427,3.542 0.313,0.156 10 false *f 2.771,0.396 3.052,0.677 0.281,0.281 10 false [5] 2.771,0.719 3.052,1 0.281,0.281 10 false [5] 2.042,1.042 3.052,1.302 1.01,0.26 10 false [1], [2], [3], [4] 5.479,0.719 5.76,1 0.281,0.281 10 false [5] 3.552,1.635 3.833,1.917 0.281,0.281 10 false [4] 5.49,1.99 5.771,2.271 0.281,0.281 10 false [2] 5.49,3.208 5.771,3.5 0.281,0.292 10 false [1] 2.813,3.208 3.094,3.49 0.281,0.281 10 false [3]
*a Shade Fully Closed *b Shade Half-opened
*c Shade Fully Opened *d Roof Glass Fully Closed
*e Roof Glass Fully Tilted-up *f Roof Glass Fully Opened
V100135

Automatic/Manual Operation - -




DIAGNOSIS


a.

If a sliding roof ECU detects a malfunction in the panoramic moon roof control system, a Diagnostic Trouble Code (DTC) is stored in memory.

i.

The DTCs can be read using the Global TechStream (GTS). For details, refer to the Repair Manual.