OUTLINE
The EG62 6-speed manual transaxle is used.
By adopting a dedicated shaft for the reverse gear, a reduction in weight and overall length has been achieved by optimization of the shape of the case and gears.
A dedicated reverse gear synchromesh mechanism has been adopted.
When shifting into reverse gear, engagement noise is reduced and a smooth shift feeling is achieved.
An intelligent Manual Transmission (iMT) system is used. This system adjusts the engine speed during a shift change to match the transmission speed, achieving a smooth shift change.
SPECIFICATION
| Item | Specification | |
|---|---|---|
|
*: The weight shown is with the transaxle filled with fluid. |
||
| Mesh Type | Forward | Constant Mesh |
| Reverse | Constant Mesh | |
| Gear Ratio | 1st | 3.916 |
| 2nd | 2.047 | |
| 3rd | 1.371 | |
| 4th | 1.025 | |
| 5th | 0.837 | |
| 6th | 0.687 | |
| Reverse | 3.416 | |
| Differential Gear Ratio | 1st to 6th | 4.312 |
| Reverse | 4.928 | |
| Synchromesh Mechanism Type | 1st, 2nd | Triple-cone |
| 3rd, 4th, 5th, 6th | Single-cone | |
| Reverse | Single-cone | |
| Oil Capacity | Liters (US qts, Imp. qts) | 1.5 (1.6, 1.3) |
| Oil Type | "TOYOTA Genuine Manual Transmission Gear Oil LV API GL-4 SAE 75W" or equivalent | |
| Weight (Reference)* | kg (lb) | 45.4 (100.1) |
PRECAUTION
Limitations of the iMT
iMT is not a system that prevents shift lever operation error or engine over revving. Depending on the situation, iMT may not operate normally and the shift position may not be changed smoothly. Overly relying on iMT may cause an unexpected accident.