CONSTRUCTION
The transaxle housing and case are made of aluminum.
By optimizing the shape of the case, a reduction in weight and overall length has been achieved.
By using the shape of the case to optimize oil flow, the volume of oil has been reduced, resulting in a reduction of churning losses by the rotating parts.
| *1 | Transaxle Case Sub-assembly | - | - |
| *a | Location of breather | *b | Oil is prevented from leaking from the breather due to the tilted sidewall even when cornering or on a steep slope. |
| *c | Oil is guided by the establishment of a step. | *d | Differential case oil guide |
| *e | Oil is distributed to the oil seal and oil receiver. | *f | Lip to return oil thrown up by the reverse gear |
|
Oil flow when driving forward |
|
Oil flow when driving in reverse |