OUTLINE
A K120F Continuously Variable Transaxle (CVT) is used.
A 10-speed sport sequential shiftmatic system is used.
A straight type shift lever is used.
A CVT fluid warmer is used in the CVT fluid cooling system.
A 2 discharge port oil pump system is used.
In order to ensure CVT fluid pressure when the Stop & Start System is operating, a CVT electric oil pump is provided. For details, see the Stop & Start System section.*
*: Models with stop and start system.
In addition to the conventional metal belt between pulleys that transmits motive force, a gear transmission mechanism similar to an MT that is used when starting off and driving at low speeds has been added.
SPECIFICATION
|
*1: Differential included. *2: The weight shown is when the transaxle is filled with fluid. |
||
| Shift Mechanism Type | Pulley and Steel Belt | |
| Forward/Reverse Switching Mechanism | Single Pinion Type Planetary Gear | |
| Gear Ratio | Forward | 3.377 |
| Reverse | 3.136 | |
| Pulley Ratio | Forward | 2.236 to 0.447 |
| Reverse | - | |
| Final Gear Ratio | 4.262 | |
| Shift Pattern | P - R - N - D - M | |
| Fluid Capacity*1 | Models with Stop & Start System | 8.3 Liters (9.0 US qts , 7.5 Imp.qts) |
| Models without Stop & Start System | 8.6 Liters (9.1 US qts , 7.6 Imp.qts) | |
| Fluid Type | Toyota Genuine CVT Fluid FE | |
| Weight (Reference)*2 | Models with Stop & Start System | 91 kg (200.6 lb) |
| Models without Stop & Start System | 90 kg (198.4 lb) | |
| Gear Transmission Mechanism | No. 1 Drive Gear | 27 |
| No. 1 Driven Gear | 40 | |
| No. 2 Drive Gear | 25 | |
| No. 2 Driven Gear | 57 | |
| Planetary Gear | Sun Gear | 39 |
| No. 1 Pinion | 18 | |
| No. 2 Pinion | 17 | |
| Ring Gear | 81 | |
| Reduction Gear | Drive Gear | 31 |
| Driven Gear | 37 | |
| Final Gear | Drive Gear Teeth | 23 |
| Driven Gear Teeth | 73 |
| No. 1 Clutch | 3 |
| No. 2 Clutch | 4 |
| No. 1 Brake | 3 |
| Torque Converter Assembly Type | 3-element, 1-step, 2-phase |
| Stall Torque Ratio | 1.8 |
MAIN FEATURES
The K120F CVT has achieved the following characteristics through the use of the items listed below.
|
○: Applicable -: Not applicable |
||||||
| Item | Fuel Economy | Power Efficiency | Driveability | Quietness | Compact and Lightweight | |
| Flat Torus Torque Converter | ○ | ○ | ○ | |||
| Synchro Engagement Gear Transmission Mechanism | ○ | ○ | ○ | ○ | ||
| Compact Continuously Variable Transmission Mechanism | ○ | ○ | ○ | |||
| Narrow Angle Belt | ○ | ○ | ||||
| Belt/Gear Transmission Switching Mechanism | ○ | ○ | ○ | ○ | ||
| Vane Type Oil Pump | ○ | ○ | ||||
| 2 Discharge Port Oil Pump | ○ | |||||
| Low Viscosity CVT Fluid FE | ○ | |||||
| Gear Ratio Pressure Control | ○ | ○ | ||||
| Oil Pressure Controller Front Arrangement | ○ | ○ | ||||
| Valve Body Artificial Aging Treatment Added | ○ | |||||
| Electronic Control System | Automatic Shift Control | ○ | ○ | ○ | ||
| Acceleration Improvement Control | ○ | ○ | ||||
| Deceleration Improvement Control | ○ | |||||
| 10-speed Sport Sequential Shiftmatic | ○ | |||||
| Uphill/Downhill Shift Control | ○ | |||||
| Engine-CVT Integrated Control | ○ | ○ | ○ | |||
| Flex Lock-up Control | ○ | ○ | ○ | |||
| Clutch Capacity Control | ○ | ○ | ||||
PRECAUTION
Ignition Switch Expressions
The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch (Position) | Engine Switch (Condition) |
|---|---|---|
| Ignition Switch off | LOCK | Off (Lock) |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON | ON | On (IG) |
| Engine Start | START | On (Start) |