CONSTRUCTION
The line of action of counterforce for the front coil spring is optimized, reducing the lateral force on the shock absorber, helping reduce suspension friction. As a result, excellent ride comfort is achieved. The spring constant is also optimized to achieve both excellent driving stability and riding comfort.
A structure is used for the front No. 1 shock absorber dust cover where the upper portion is connected with the front suspension support sub-assembly, while the lower portion is connected with the claws of the front shock absorber assembly. As a result, the absorber rod is prevented from being exposed throughout the entire stroke range of the suspension, preventing dust from entering the seal areas and ensuring robustness.
The front lower coil spring insulator uses a structure where the end coil rising portion of the coil spring follows the coil spring throughout the entire stroke range of the suspension. As a result, gaps are suppressed. A half-pipe cross sectional shape is also used to prevent foreign matter from entering the coil spring contact surface.
| *1 | Front Upper Coil Spring Insulator | *2 | Front Coil Spring |
| *3 | Front No. 1 Shock Absorber Dust Cover | *4 | Front Lower Coil Spring Insulator |
| *a | End Coil Rising Portion and Half-pipe Cross Sectional Shape | - | - |