CONSTRUCTION
A low-pressure (N2) gas sealed front shock absorber with built-in rebound spring is used.
When the stroke is small during normal driving, the rebound spring does not operate, keeping the suspension soft. When the inner wheel rebound is larger (such as during turning), the rebound spring is operated to reduce elongation of the suspension, ensuring roll rigidity. As a result, riding comfort is ensured while also achieving excellent maneuverability and stability.
A valve that ensures damping force even in the very low-speed range is used. As a result, damping is securely performed from a very small range, ensuring responsiveness while achieving a flat and high quality riding comfort with good suppression and reduced large shocks.
| *1 | Oil Seal | *2 | Absorber Rod |
| *3 | Rebound Spring | *4 | Base Valve |
| *5 | Piston Valve | *6 | Oil |
| *7 | Low-pressure (N2) Gas | *8 | Rod Guide Bush |
To prevent hazardous conditions, make sure to empty the gas from the front shock absorber assembly before discarding the low-pressure (N2) gas sealed in the front shock absorber assembly. For details, refer to the Repair Manual.