CONSTRUCTION
A low-pressure (N2) gas sealed rear shock absorber assembly is used.
A valve that ensures damping force even in the very low-speed range is used. As a result, damping is securely performed from a very small range, ensuring responsiveness while achieving a flat and high quality riding comfort with good suppression and reduced large shocks.
| *1 | Oil Seal | *2 | Absorber Rod |
| *3 | Piston Valve | *4 | Base Valve |
| *5 | Oil | *6 | Low-pressure (N2) Gas |
| *7 | Rod Guide Bush | - | - |
To prevent hazardous conditions, make sure to empty the gas from the rear shock absorber assembly before discarding the low-pressure (N2) gas sealed in the rear shock absorber assembly. For details, refer to the Repair Manual.