CONSTRUCTION
A stabilizer bar with an optimized spring constant is used, achieving both driving stability and riding comfort. Additionally, a hollow type is used to ensure rigidity and achieve weight reduction.
A ball joint is used on the stabilizer bar side of the rear stabilizer link assembly. A bush is used on the No. 2 rear suspension arm assembly side. The No. 2 rear suspension arm assembly is reinforced by the inner cylinder of the bush, helping reduce the weight of the No. 2 rear suspension arm assembly.
A stabilizer bush with an inter-ring is used to improve rigidity perpendicular to the axis of the bush. Teflon liner is applied to areas that contact the rear stabilizer bar, reducing sliding friction. As a result, high driving stability and high quality riding comfort are achieved.
| *1 | Rear Stabilizer Link Assembly | *2 | Rear Stabilizer Bar |
| *3 | Inter-ring | *4 | Rear Stabilizer Bush |
| *5 | Teflon Liner | - | - |