CONSTRUCTION
A single diaphragm type brake booster is used to achieve weight reduction.
Tie-rods are used inside the brake booster to ensure rigidity during operation.
A vacuum warning switch assembly and vacuum sensor assembly*, which detects the brake booster vacuum pressure, are installed to the brake booster.
*: Models with stop and start system
| *A | Models with Stop and Start System | - | - |
| *1 | Vacuum Sensor Assembly | *2 | Vacuum Warning Switch Assembly |
| *A | Models with Stop and Start System | - | - |
| *1 | Vacuum Sensor Assembly | *2 | Vacuum Warning Switch Assembly |