Home › Brake › PARKING BRAKE › ELECTRIC PARKING BRAKE SYSTEM(for Gasoline Model)
NM3620E _54 Brake _076469 PARKING BRAKE _0379052 ELECTRIC PARKING BRAKE SYSTEM(for Gasoline Model) GE GENERAL F

PARKING BRAKE  ELECTRIC PARKING BRAKE SYSTEM(for Gasoline Model)  GENERAL  GENERAL  


OUTLINE


a.

An electric parking brake system is used.


b.

The electric parking brake uses actuators to operate the parking brake, making it possible to perform automatic linked operations by using information from other ECUs and improving usability.


c.

The electric parking brake has the following functions.

Manual Function Locks and releases the parking brake according to driver switch operations.
Auto Function (Models without Manual Transaxle) Locks and releases the parking brake according to the shift position when this function is on.
Auto Function (Models with Manual Transaxle) Locks the parking brake according to the ignition switch position when this function is on.
Parking Brake Automatic Release Function Detects accelerator pedal depression and releases the parking brake.
Brake Hold Function Operates together with the brake hold function and locks the parking brake. For details, refer to the Brake Control System section.


d.

Ignition Switch Expressions

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section:

Expression Ignition Switch (Position) Engine Switch (Condition)
Ignition Switch Off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)