CONSTRUCTION
A 3-shaft counter gear type gear train is used to reduce the rear drive unit height, achieving size and weight reduction.
The optimal number of teeth is set for each gear and high-precision tooth surface processing is used, achieving a high reduction ratio and quietness.
A differential pre-torque mechanism, which provides a conical spring washer between the differential side gear and differential side gear thrust washer, is used, ensuring differential limit torque. As a result, straightline stability is achieved in the everyday driving range.
This rear drive unit transfers the motive force of MGR to the counter drive gear, counter driven gear, differential drive gear, differential ring gear and differential gear unit, in order to drive the rear wheels.
| *1 | Motor Generator Rear (MGR) | *2 | Counter Drive Gear |
| *3 | Counter Driven Gear | *4 | Differential Drive Gear |
| *5 | Differential Ring Gear | *6 | Drive Shaft LH |
| *7 | Differential Gear Unit | *8 | Drive Shaft RH |
| *a | Differential Pre-torque Mechanism | *b | Light Load Range |
| *c | Middle and High Load Range | *d | Side Gear |
| *e | Conical Spring Washer | *f | Differential Side Gear Thrust Washer |
| *g | Differential Case | - | - |
|
Flow of Power Transmission | - | - |