Home › Engine / Hybrid System › A25A-FXS (EMISSION CONTROL) › GASOLINE PARTICULATE FILTER (GPF) › from 2019.02
NM3620E _51 Engine / Hybrid System _076664 A25A-FXS EMISSION CONTROL _0388931 GASOLINE PARTICULATE FILTER (GPF) CO CONTROL F

A25A-FXS EMISSION CONTROL  GASOLINE PARTICULATE FILTER (GPF)  CONTROL  GASOLINE PARTICULATE FILTER (GPF) CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components of the GPF system are as follows:

Component Function
Differential Pressure Sensor Measures the pressure difference between atmosphere and upstream of the GPF catalyst.
ECM Controls the GPF system based on signals from each sensor.



FUNCTION


a.

Determines the GPF catalyst conditions based on various signals and controls the GPF catalyst conditions.


b.

Accumulated particulate matter is oxidized within the GPF catalyst when it is combined with oxygen at high temperatures. When the GPF catalyst is hot such as when driving under high engine load and fuel cut occurs, oxygen introduced into the GPF catalyst oxidizes the particulate matter.


c.

If the engine is only run at low engine loads, particulate matter gradually accumulates in the GPF catalyst and will eventually lead to clogging. The ECM determines the amount of clogging from the estimated amount of accumulated particulate matter calculated from increases and decreases in the amount of accumulated particulate matter while the engine is running and the differential pressure sensor value. When the threshold is exceeded, a message is displayed on the multi-information display in the combination meter assembly, engine output power restriction is performed and the Malfunction Indicator Lamp (MIL) illuminates. Since the engine output power restriction function only operates when there is a possibility that a malfunction may occur, even if the state of clogging remains the same, it may not operate depending on how the vehicle is used. Furthermore, the level of engine output power restriction changes in steps in accordance with the amount of clogging.

HINT:

When engine output power restriction is being performed, it will still be possible to drive the vehicle.


W139761E01
3.333,1.417 3.5,1.417 3.5,1.417 4,1.583 true 2.917,1.917 3.083,1.917 3.083,1.917 3.583,2.083 true 3.75,0.938 3.917,0.938 3.917,0.938 4.417,1.104 true 4.833,0.167 5.667,0.167 5.667,0.167 5.167,0.833 true 0.542,0.406 0.979,0.615 0.438,0.208 10 false Large 0.552,4.844 0.99,5.052 0.438,0.208 10 false Small 1.073,5.063 1.51,5.271 0.438,0.208 10 false Small 6.344,5.052 6.781,5.26 0.438,0.208 10 false Large 0.146,2.458 0.844,2.854 0.698,0.396 10 false Amount of Clogging 3.125,5.083 4.188,5.323 1.063,0.24 10 false Distance Driven 5.948,1.083 7.115,1.667 1.167,0.583 10 false Engine Output Power Restricted (When necessary) 2.76,1.833 2.938,2.052 0.177,0.219 10 false A 3.188,1.323 3.365,1.542 0.177,0.219 10 false B 1.01,5.604 2.375,5.833 1.365,0.229 10 false : Normal Driving 1.021,6.115 3.042,6.375 2.021,0.26 10 false : No Oxidation Performed 0.354,6.49 2.094,6.74 1.74,0.25 10 false This image is an example. 2.75,0.052 4.792,0.479 2.042,0.427 10 false Malfunction Indicator Lamp (MIL) Illuminated (When necessary) 3.583,0.833 3.76,1.052 0.177,0.219 10 false C

Combination Meter Assembly Display Content
Condition
(Text in Illustration)
Engine Output Restriction Control Multi-information Display Malfunction Indicator Lamp (MIL)

*: When necessary

A Performed*
·

Exhaust Filter Full See Owner's Manual*


-
B Performed*
·

Hybrid System Malfunction Output Power Reduced Visit Your Dealer*

·

Exhaust Filter Full See Owner's Manual*


Illuminates*
C Performed*
·

Exhaust Filter Full Visit Your Dealer

·

Hybrid System Malfunction Output Power Reduced Visit Your Dealer*


Illuminates*