CONSTRUCTION
A multiple layer plastic fuel tank assembly is used for weight reduction. This fuel tank assembly consists of 6 layers of 4 types of materials.
A fuel drain mark has been provided at the lowest position of the fuel tank assembly in order to clarify and simplify the location of the drain. When dismantling (scrapping) the vehicle, drain fuel by drilling a hole at the drain mark.
| *1 | Fuel Tank Assembly | - | - |
| *a | Fuel Tank Assembly Outside | *b | Fuel Tank Assembly Inside |
| *c | Fuel Tank Assembly Wall Cross Section | *d | High Density Polyethylene (HDPE) |
| *e | Regrind Material | *f | Adhesive |
| *g | Ethylene Vinyl Alcohol Copolymer (EVOH) | *h | Fuel Drain Mark |
| *i | View from Bottom Side | - | - |