Home › Engine / Hybrid System › A25B-FXS (FUEL) › FUEL SYSTEM › from 2019.02
NM3620E _51 Engine / Hybrid System _080133 A25B-FXS FUEL _0389117 FUEL SYSTEM DE DETAILS F

A25B-FXS FUEL  FUEL SYSTEM  DETAILS  FUEL PUMP (FOR HIGH PRESSURE)  


CONSTRUCTION


a.

The fuel pump assembly (for high pressure side) is composed of an electromagnetic spill valve that adjusts the discharge amount of high pressurized fuel, a plunger that is driven by the exhaust camshaft to pressurize fuel, a check valve that mechanically opens and closes the path to the fuel delivery pipe (for high pressure side) and a fuel relief valve that releases the fuel when a malfunction is detected in the high-pressure fuel system. In addition, to reduce fuel pulsations, a fuel pressure pulsation damper assembly is installed at the inlet for low pressure fuel flowing from the fuel tank assembly.


b.

A roller lifter (fuel pump lifter assembly) is provided to cope with higher output performance and higher pressurized fuel.


c.

The plunger is moved up and down by a lobe that is located at the rear end of the exhaust camshaft of the engine. This lobe causes 4 strokes of the pump piston to occur for each camshaft revolution (4 protrusions exist 90 degrees from each other on the same camshaft "lobe").


d.

The pressure of highly pressurized fuel is adjusted between 2.4 to 20 MPa in accordance with the vehicle driving conditions, reducing friction loss.


e.

A spill control valve is used to control the pump discharge pressure. The spill control valve is located in the inlet passage of the fuel pump assembly (for high pressure side). The valve is electrically opened and closed by the ECM.


f.

A check valve is present in the outlet of the fuel pump assembly (for high pressure side). As the pressure in the outlet of the pump rises and becomes high enough to push the check valve off its seat, fuel will begin to flow to the fuel delivery pipe (for high pressure side) (minimum pressure to open the check valve is 60 kPa).

W136585C02
3.333,1.25 3.708,0.719 3.708,0.719 3.833,0.719 true 1.792,3.01 2.229,3.01 true 1.667,4.531 1.833,4.531 1.833,4.531 2.031,5.042 true 5.333,0.531 5.469,0.531 5.469,0.531 5.646,0.896 true 5.927,1.073 6.365,1.073 true 3.781,4.896 3.896,4.896 3.896,4.896 4.031,4.531 true 4.615,5.24 4.802,5.24 true 2.302,6.281 2.469,6.281 2.469,6.281 2.646,5.823 true 2.875,5.531 3.073,4.76 3.073,4.76 3.198,4.76 true 6.021,1.5 6.188,1.5 true 3.896,0.646 4.208,0.802 0.313,0.156 10 false *1 1.594,2.948 1.906,3.104 0.313,0.156 10 false *2 5.135,0.469 5.448,0.625 0.313,0.156 10 false *3 6.427,1 6.74,1.156 0.313,0.156 10 false *4 6.24,1.438 6.552,1.594 0.313,0.156 10 false *5 0.76,5.01 1.073,5.167 0.313,0.156 10 false *6 1.479,4.458 1.792,4.615 0.313,0.156 10 false *7 3.25,4.688 3.563,4.844 0.313,0.156 10 false *8 2.115,6.219 2.427,6.375 0.313,0.156 10 false *9 4,4.021 4.469,4.177 0.469,0.156 10 false *10 3.531,4.823 4,4.979 0.469,0.156 10 false *11 4.073,4.667 4.542,4.823 0.469,0.156 10 false *12 4.854,5.167 5.323,5.323 0.469,0.156 10 false *13 5.417,4.646 5.885,4.802 0.469,0.156 10 false *14 5.406,5.438 5.875,5.594 0.469,0.156 10 false *15 4.479,6.302 4.948,6.458 0.469,0.156 10 false *16 4.042,1.865 4.354,2.021 0.313,0.156 10 false *a 0.781,1.792 1.094,1.948 0.313,0.156 10 false *b 2.469,3.292 2.781,3.448 0.313,0.156 10 false *c 6.635,3.594 6.948,3.75 0.313,0.156 10 false *d
*1 Spill Control Valve *2 Roller Lifter (Fuel Pump Lifter Assembly)
*3 Fuel Injector Assembly (for High Pressure Side) *4 Fuel Delivery Pipe (for High Pressure Side)
*5 Fuel Pressure Sensor (for High Pressure Side) *6 Fuel Tank Assembly
*7 Fuel Main Valve Assembly *8 Fuel Pump (for Low Pressure Side)
*9 Fuel Filter *10 Fuel Pump Assembly (for High Pressure Side)
*11 Fuel SUS Filter *12 Fuel Pressure Pulsation Damper Assembly
*13 Plunger *14 Check Valve (60 kPa)
*15 Fuel Relief Valve (26.4 MPa) *16 Exhaust Camshaft (Cam to Drive Fuel Pump)
*a Low-pressure Fuel (from Fuel Pump (for Low Pressure Side)) *b High-pressure Fuel (to Fuel Delivery Pipe (for High Pressure Side))
*c to Fuel Delivery Pipe Sub-assembly (for Low Pressure Side) *d High-pressure Fuel Pipe




OPERATION


a.

During the exhaust camshaft portion of the pump cycle, the spill control valve is opened, and the pump plunger (piston) is moved downward by spring force. This allows fuel to be drawn into the cylinder of the pump. If the spill control valve has not been closed yet, when the cam forces the plunger to move upward, the fuel in the pump cylinder (this fuel is not pressurized) will be pushed back to the pump inlet (fuel tank side).


b.

In order to close the spill control valve as the piston is moving upward, the ECM sends a signal to the valve. When the spill control valve is closed and the plunger is moving upward, the pressure in the pump cylinder will rise. As this pressure rises above 60 kPa (or the pressure of the delivery pipe, whichever is higher), the fuel will begin to flow to the fuel delivery pipe (for high pressure side). The ECM calculates the target fuel pressure based on driving conditions. The ECM controls the pressure by operating the spill control valve. The timing and duration of the spill control valve closing are varied to cause the pump pressure to meet the target pressure.


c.

If the fuel pressure in the high-pressure fuel pipes is abnormally high, the relief valve discharges some of fuel in order to limit the pressure.

W135862E01
1.594,1.531 1.729,1.531 1.729,1.531 2.094,0.604 true 2.542,0.552 2.698,0.188 2.698,0.188 2.844,0.188 true 4,0.271 4.135,0.271 4.135,0.271 4.313,0.646 true 4.885,0.542 5.042,0.177 5.042,0.177 5.188,0.177 true 6.198,1.906 6.333,1.906 6.333,1.906 6.594,3.052 true 3.885,2.479 4.021,2.479 4.021,2.479 4.135,3.094 true 4.083,3.948 4.083,3.583 true 1.042,2.563 1.292,2.365 1.292,2.365 1.438,2.365 true 0.979,3.333 1.5,3.781 1.5,3.781 1.646,3.781 true 1.021,4.448 1.167,4.219 1.167,4.219 1.271,4.219 true 0.552,0.625 1.302,0.844 0.75,0.219 10 false Plunger Lift 0.146,0.917 1.406,1.135 1.26,0.219 10 false Spill Control Valve 0.688,1.448 1.615,1.667 0.927,0.219 10 false Pressure Rise 2.906,0.104 3.458,0.354 0.552,0.25 10 false Suction 3.5,0.188 4.052,0.479 0.552,0.292 10 true Inactive 3.51,1.25 5.333,1.458 1.823,0.208 10 false Valve Closing Timing Control 5.25,0.083 6.177,0.302 0.927,0.219 10 false Pressure Rise 6.094,0.76 6.646,1.01 0.552,0.25 10 false Open 6.104,1.01 6.656,1.26 0.552,0.25 10 false Closed 1.49,2.281 2.271,2.625 0.781,0.344 10 false Spill Control Valve 1.708,3.708 2.281,3.969 0.573,0.26 10 false Plunger 1.323,4.146 2.281,4.719 0.958,0.573 10 false Exhaust Camshaft Lobe (4 Peaks) 3.458,2.396 3.906,2.781 0.448,0.385 10 false Check Valve 3.552,4 4.615,4.25 1.063,0.25 10 false Fuel Relief Valve 3.375,1.823 6.323,2.083 2.948,0.26 10 false to Fuel Delivery Pipe (for High Pressure Side) 1.052,5.146 1.604,5.396 0.552,0.25 10 false Suction 3.25,5.146 3.802,5.396 0.552,0.25 10 false Inactive 5.385,5.146 6.313,5.365 0.927,0.219 10 false Pressure Rise 3.229,8.5 4.156,8.719 0.927,0.219 10 false Relieved 5.052,6.417 6.531,6.792 1.479,0.375 10 false from Fuel Delivery Pipe (for High Pressure Side)