Home › Engine / Hybrid System › A25B-FXS (FUEL) › FUEL SYSTEM › from 2019.02
NM3620E _51 Engine / Hybrid System _080133 A25B-FXS FUEL _0389117 FUEL SYSTEM DE DETAILS F

A25B-FXS FUEL  FUEL SYSTEM  DETAILS  FUEL INJECTOR (FOR DIRECT INJECTION)  


CONSTRUCTION


a.

High-pressure, 6-hole type direct fuel injector assemblies are used in conjunction with the adoption of the Direct injection 4-stroke gasoline engine Superior version (D-4S) system.


b.

The use of this direct fuel injector assembly causes the fuel to become highly atomized. At the same time, the fuel is mixed with a large amount of air and injected into the combustion chamber. As a result, fuel injection dissipation performance is improved to achieve a homogeneous air-fuel mixture, high performance and high engine output.


c.

A Teflon sealant is used for the cylinder internal pressure sealant and an insulator is used at the cylinder head sub-assembly contact area to reduce vibration and noise and improve sealing performance.


d.

An O-ring and backup ring* are used in the direct fuel injector assembly. As a result, the transmission of operation noise from the direct fuel injector assembly is reduced to improve quietness and ensure fastener airtightness.

NOTICE:

*: The backup ring is installed to securely support the rubber O-ring, which is subjected to high pressures. Take care to install the backup ring in the correct direction at the correct installation position.


W135865C01
2.229,0.25 2.385,0.25 2.385,0.25 2.719,0.563 true 3.042,0.656 3.438,0.458 3.438,0.458 3.583,0.458 true 3,3.208 3.396,3.01 3.396,3.01 3.542,3.01 true 2.083,2.542 2.24,2.542 2.24,2.542 2.563,2.25 true 2.052,0.146 2.365,0.302 0.313,0.156 10 false *a 3.635,0.365 3.948,0.521 0.313,0.156 10 false *b 1.917,2.438 2.229,2.594 0.313,0.156 10 false *c 3.594,2.927 3.906,3.083 0.313,0.156 10 false *d 2.813,3.521 3.125,3.677 0.313,0.156 10 false *e 4.979,2.531 5.292,2.688 0.313,0.156 10 false *f
*a O-ring *b Backup Ring
*c Insulator *d Teflon Sealant
*e Direct Fuel Injector Assembly Cross Section *f Injection Hole