OUTLINE
TOYOTA Hybrid System-II (THS-II) (for HV Models)
This system optimally performs cooperative control of the A25A-FXS*1/A25B-FXS*2 engine, and Motor Generator No. 1 (MG1) and Motor Generator No. 2 (MG2) in the P710 hybrid vehicle transaxle assembly that provides excellent transmission performance. On the 4WD/AWD models, the E-Four system also controls Motor Generator Rear (MGR) through the Q610 rear drive unit that provides excellent traction performance.
The system has 2 batteries, which are used for different purposes. One is the HV battery (nominal voltage of DC 244.8 V) which stores electrical power to drive the vehicle, and the other is the auxiliary battery (nominal voltage of DC 12 V) which supplies electrical power to the electrical components.
Furthermore, this system uses a variable-voltage system consisting of the high-output HV battery (nominal voltage of DC 244.8 V), a boost converter that boosts the operating voltage of MG1, MG2 and MGR*3 to a maximum voltage of DC 650 V, and an inverter which converts direct current and alternating current.
*1: Except destination package for Morocco
*2: Destination package for Morocco
*3: 4WD/AWD models
| *A | 2WD Models | *B | 4WD/AWD Models |
| *C | Except Destination Package for Morocco | *D | Destination Package for Morocco |
| *1 | Inverter with Converter Assembly
·
Inverter ·
Boost Converter ·
DC-DC Converter |
*2 | A25A-FXS Engine |
| *3 | A25B-FXS Engine | *4 | P710 Hybrid Vehicle Transaxle Assembly
·
Motor Generator No. 1 (MG1) ·
Motor Generator No. 2 (MG2) |
| *5 | HV Battery | *6 | Auxiliary Battery |
| *7 | Q610 Rear Drive Unit
·
Motor Generator Rear (MGR) |
- | - |
A25A-FXS Engine (for HV Models) (Except destination package for Morocco)
The A25A-FXS engine is an in-line 4-cylinder, 2.5 liter, 16 valve DOHC engine.
The engine adopts the Dual Variable Valve Timing-intelligent (Dual VVT-i) system which achieves optimal valve timing by using electric motors to actuate the intake camshaft actuators and engine oil pressure to actuate the exhaust camshaft actuators. In addition, this engine uses a high-expansion ratio Atkinson cycle, Direct injection 4-stroke gasoline engine Superior version (D-4S) system, Direct Ignition System (DIS), Electronic Throttle Control System-intelligent (ETCS-i) and Exhaust Gas Recirculation (EGR) system employing a highly efficient EGR cooler. As a result, improved engine performance, quietness, fuel economy and cleaner emissions have been achieved.
| Engine Type | A25A-FXS | |
|---|---|---|
| No. of Cyls. & Arrangement | 4-cylinder, In-line | |
| Valve Mechanism | 16-valve DOHC, Chain Drive
(With VVT-iE and VVT-i) |
|
| Displacement | cm3 (cu. in.) | 2487 (151.8) |
| Max. Output (EEC) | kW@rpm | 131@5700 |
| Max. Torque (EEC) | N*m@rpm | 221@3600 to 5200 |
A25B-FXS Engine (for HV Models) (Destination package for Morocco)
The A25B-FXS engine is an in-line 4-cylinder, 2.5 liter, 16 valve DOHC engine.
The engine adopts the Dual Variable Valve Timing-intelligent (Dual VVT-i) system which achieves optimal valve timing by using electric motors to actuate the intake camshaft actuators and engine oil pressure to actuate the exhaust camshaft actuators. In addition, this engine uses a high-expansion ratio Atkinson cycle, Direct injection 4-stroke gasoline engine Superior version (D-4S) system, Direct Ignition System (DIS), Electronic Throttle Control System-intelligent (ETCS-i) and Exhaust Gas Recirculation (EGR) system employing a highly efficient EGR cooler. As a result, improved engine performance, quietness, fuel economy and cleaner emissions have been achieved.
| Engine Type | A25B-FXS | |
|---|---|---|
| No. of Cyls. & Arrangement | 4-cylinder, In-line | |
| Valve Mechanism | 16-valve DOHC, Chain Drive
(With VVT-iE and VVT-i) |
|
| Displacement | cm3 (cu. in.) | 2487 (151.8) |
| Max. Output (EEC) | kW@rpm | 131@5700 |
| Max. Torque (EEC) | N*m@rpm | 221@3600 to 5200 |
A25A-FKS Engine (for Gasoline Models)
The A25A-FKS engine is an in-line 4-cylinder, 2.5 liter, 16 valve DOHC engine.
The engine adopts the Dual Variable Valve Timing-intelligent (Dual VVT-i) system which achieves optimal valve timing by using electric motors to actuate the intake camshaft actuators and engine oil pressure to actuate the exhaust camshaft actuators. In addition, this engine uses a high-expansion ratio Atkinson cycle, Direct injection 4-stroke gasoline engine Superior version (D-4S) system, Direct Ignition System (DIS), Electronic Throttle Control System-intelligent (ETCS-i) and Exhaust Gas Recirculation (EGR) system employing a highly efficient EGR cooler. As a result, improved engine performance, quietness, fuel economy and cleaner emissions have been achieved.
| Engine Type | A25A-FKS | |
|---|---|---|
| No. of Cyls. & Arrangement | 4-cylinder, In-line | |
| Valve Mechanism | 16-valve DOHC, Chain Drive
(With VVT-iE and VVT-i) |
|
| Displacement | cm3 (cu. in.) | 2487 (151.8) |
| Max. Output (EEC) | kW@rpm | 152@6600 |
| Max. Torque (EEC) | N*m@rpm | 243@4000 to 5000 |
M20A-FKS Engine (for Gasoline Models)
The M20A-FKS engine is an in-line 4-cylinder, 2.0 liter, 16 valve DOHC engine.
The engine adopts the Dual Variable Valve Timing-intelligent (Dual VVT-i) system which achieves optimal valve timing by using electric motors to actuate the intake camshaft actuators and engine oil pressure to actuate the exhaust camshaft actuators. In addition, this engine uses a high-expansion ratio Atkinson cycle, Direct injection 4-stroke gasoline engine Superior version (D-4S) system, Direct Ignition System (DIS), Electronic Throttle Control System-intelligent (ETCS-i) and Exhaust Gas Recirculation (EGR) system employing a highly efficient EGR cooler. As a result, improved engine performance, quietness, fuel economy and cleaner emissions have been achieved.
| Engine Type | M20A-FKS | |
|---|---|---|
|
*1: Models with Gasoline Particulate Filter (GPF) system *2: Models without Gasoline Particulate Filter (GPF) system |
||
| No. of Cyls. & Arrangement | 4-cylinder, In-line | |
| Valve Mechanism | 16-valve DOHC, Chain Drive
(With VVT-iE and VVT-i) |
|
| Displacement | cm3 (cu. in.) | 1987 (121.3) |
| Max. Output (EEC) | kW@rpm | 129@6600*1
127@6600*2 |
| Max. Torque (EEC) | N*m@rpm | 208@4300 to 5200*1
203@4400 to 4900*2 |
Hybrid Vehicle Transaxle (for HV Models)
The P710 hybrid transaxle is used.
The Q610 rear drive unit is used.
Manual Transaxle (for Gasoline Models)
The EG62 or EG62F 6-speed manual transaxle is used.
Continuously Variable Transaxle (CVT) (for Gasoline Models)
The K120 or K120F Continuously Variable Transaxle (CVT) is used.
Automatic Transaxle (for Gasoline Models)
The UB80E or UB80F 8-speed automatic transaxle is used.
Suspension
A MacPherson strut type independent suspension is used for the front.
A double-wishbone type independent suspension is used for the rear.
Front Brake
A ventilated disc brake is provided for the front brake.
Rear Brake
A ventilated disc brake or a solid disc brake is provided for the rear brake.
Brake Control System
The following brake control functions are provided: Anti-lock Brake System (ABS), Electronic Brake force Distribution (EBD), brake assist, Traction Control (TRC), Vehicle Stability Control (VSC), Active Cornering Assist (ACA), steering cooperative control, trailer sway control, hill-start assist control, downhill assist control and brake hold.
Parking Brake
An electric parking brake system is provided.
Steering
A rack and pinion type steering gear assembly is used.
An Electric Power Steering (EPS) system is used.
A manual tilt and manual telescopic system is used.
A heated steering wheel system is used.
Drive Mode Select (for HV Models)
The drive mode select is a function where control characteristics switches of the powertrain (hybrid control system), chassis [Electric Power Steering (EPS) system] and air conditioning (air conditioning system) are integrated. This function optimally controls each system according to the driving mode selected by the driver.
| *1 | Drive Mode Select | - | - |
| *a | The illustration is a representative example. | - | - |
Each drive mode of the drive mode select is provided with the following control characteristics:
| Drive Mode | Powertrain | Chassis | Air Conditioning |
|---|---|---|---|
| Hybrid Control System | EPS System | Air Conditioning System | |
| Normal | Normal | Normal | Normal |
| Eco | Eco | Normal | Eco |
| Sport | Power | Sport | Normal |
The control characteristics in each drive mode are as follows:
| Drive Mode | Control Characteristics |
|---|---|
| Normal | Performs control for normal driving. |
| Eco | Performs control for driving with improved fuel efficiency by generating torque more gently than Normal mode according to accelerator pedal depression while suppressing air conditioning cooling and heating operations. |
| Sport | Performs control suitable for sporty driving by improving the acceleration response by controlling the transmission and hybrid control system and also improving the steering feeling. |
Drive Mode Select (for Gasoline Models)
The drive mode select is a function where control characteristics switches of the powertrain (engine control system, transmission control system*), chassis [Electric Power Steering (EPS) system] and air conditioning (air conditioning system) are integrated. This function optimally controls each system according to the driving mode selected by the driver.
*: Except models with manual transaxle
| *1 | Drive Mode Select | - | - |
| *1 | Drive Mode Select | - | - |
Each drive mode of the drive mode select is provided with the following control characteristics:
| Drive Mode | Powertrain | Chassis | Air Conditioning | |
|---|---|---|---|---|
| Engine Control System | Transmission Control System* | EPS System | Air Conditioning System | |
|
*: Except models with manual transaxle |
||||
| Normal | Normal | Normal | Normal | Normal |
| Eco | Eco | Eco | Normal | Eco |
| Sport | Power | Power | Sport | Normal |
The control characteristics in each drive mode are as follows:
| Drive Mode | Control Characteristics |
|---|---|
|
*: Except models with manual transaxle |
|
| Normal | Performs control for normal driving. |
| Eco | Performs control for driving with improved fuel efficiency by generating torque more gently than Normal mode according to accelerator pedal depression while suppressing air conditioning cooling and heating operations. |
| Sport | Performs control suitable for sporty driving by improving the acceleration response by controlling the transmission* and engine and also improving the steering feeling. |
AWD Integrated Management (AIM) (for HV 4WD/AWD Models)
AIM ensures superior driving stability according to the road surface by performing integrated hybrid, brake and AWD control when trail mode is turned on.
AWD Integrated Management (AIM) (for Gasoline 4WD/AWD Models)
AIM ensures superior driving stability according to the road surface by performing integrated engine, transmission, brake and 4WD/AWD control when "MUD & SAND" or "ROCK & DIRT" is selected by multi-terrain select.