CONSTRUCTION
Front Fender Splash Shield
The front fender splash shield front uses a shape that stretches to the side of the front bumper. As a result, the volume of air that strikes the front tire is reduced, suppressing air turbulence at the side of the vehicle and decreasing air resistance.
| *1 | Front Fender Splash Shield Front LH | - | - |
|
Airflow | - | - |
Door Outside Handle
The door outside handle assembly uses a structure that has no seam between its moveable and immovable parts in consideration of aerodynamics. As a result, the airflow around the door outside handle assembly is controlled, achieving high responsiveness when steering.
| *A | RAV4 | *B | Conventional Models |
| *1 | Door Outside Handle Assembly | - | - |
| *a | Clearance | *b | One Piece Structure |
| *c | Split Structure | - | - |
|
Airflow | - | - |
Air Kick
An air kick is used for the rear door outside lower molding sub-assembly.
The rocker side airflow is directed to the side of the vehicle to decrease the volume of air that strikes the rear tire, suppressing air turbulence at the side of the vehicle and decreasing air resistance.
| *1 | Rear Door Outside Lower Molding Sub-assembly LH | - | - |
|
Airflow | - | - |
Rear End
A rear spoiler sub-assembly and rear side spoiler sub-assembly are used. As a result, the airflow from the roof and cabin side is directed to the rear, suppressing air turbulence at the rear of the vehicle and decreasing air resistance.
| *1 | Rear Spoiler Sub-assembly | *2 | Rear Side Spoiler Sub-assembly LH |
| *3 | Rear Side Spoiler Sub-assembly RH | - | - |
|
Airflow | - | - |
Under Cover
An engine under cover, floor cover and heat insulator are used to create a flat structure for the bottom of the vehicle.
Aero stabilizing fins are optimally positioned on the underside of the vehicle to adjust the air flowing under the vehicle and effectively generate downforce.
| *A | HV Models | *B | Gasoline Models (Full Cover Type) |
| *C | Gasoline Models (Half Cover Type) | *D | 4WD/AWD models |
| *E | Models for G.C.C. Countries | - | - |
| *1 | Engine Under Cover No. 1 | *2 | Engine Under Cover Assembly No. 2 |
| *3 | Front Floor Cover LH | *4 | Front Floor Cover RH |
| *5 | Engine Under Cover Heat Insulator | *6 | Front Floor Cover Center |
| *7 | Front Floor Heat Insulator No. 2 | *8 | Floor Under Cover No. 1 |
| *9 | Front Floor Heat Insulator No. 1 Lower | *10 | Floor Under Cover No. 1 |
| *11 | Floor Under Cover No. 2 | - | - |
| *a | Aero Stabilizing Fin | - | - |
Air Spats
A front fender splash shield front and rear wheel house plate front are provided in front of the front and rear tires to adjust the air flowing under the vehicle.
| *A | Destination package for Korea | *B | Except destination package for Korea |
| *1 | Front Fender Splash Shield Front LH | *2 | Rear Wheel House Plate Front LH |