OUTLINE
Design Theme
Adventure and refined
Functionality and details evocative of a true SUV create a high quality and refined interior space for exciting urban driving
Overall Theme
Driver space with a great view and holding performance
The instrument panel cleanly uses limited space and has a low horizontal position. As a result, in addition to providing a great view, the vehicle maintains a sense of balance even during body roll (A in illustration).
The wide and bold console concentrates all operation functions in a single location, emphasizes the center position and ensures knee holding performance, delivering the sense of toughness and security that only an SUV can provide (B in illustration).
Soft pads are positioned where hands and body parts may contact the vehicle during normal and off-road driving.
Soft pads are positioned throughout the vehicle in a way that envelopes the interior space, expressing a high quality space that offers both security and comfort.
Comparison between hard surface and soft surface
Rigid and hard surfaces are expressed using the upper (A in illustration) and lower parts of the instrument panel (B in illustration) and the grip (D in illustration) on the door trim.
Soft pads are positioned on the main parts contacted by hands, creating a functionally modulated structure (C and E in illustration).
Polygonal motif structure consistent with external shape
The entire interior is based on a polygonal motif inspired by the "cross octagon" structural theme of the external shape. As a result, a consistent design and a sense of refined playfulness are expressed for the interior design.
Feeling of controlling a true SUV
Switches and grips are positioned for easy access when wearing gloves or driving off-road and careful consideration went into selecting their sizes, cross section shapes and materials for the perfect combination of refinement and ease of use.
Easy-to-press switches with sunken cross sections and projections (C and D in illustrations)
Shape that adapts to the palm of hand (E in illustration)
| *1 | Heater Control Dial Knob | *2 | Drive Mode Switch Dial Knob |
| *3 | Dedicated Switch | *4 | Front Door Assist Grip Assembly |
| *a | A - A Cross Section | *b | B - B Cross Section |
| *c | Rubber Material | *d | Rubber Material (High Grade) |
Polygonal motif pattern features details that stimulate a playful mood
The consistent pattern that uses a polygonal motif is positioned throughout the entire interior. As a result, a sense of playfulness is expressed that brings to mind the tough usage that only an SUV can provide.
| *A | Polygon Motif Pattern | - | - |
| *1 | Tray Bottom | *2 | Speaker Grille |
| *3 | Seat Cover | - | - |
MAIN FEATURES
Instrument Panel
General
A large combination meter and large center display* are used for the innovative cockpit system. The center display is located toward the top of the instrument panel for ease of use and visibility.
The middle pads on the driver and passenger sides form a one piece structure with the instrument panel. Upholstery is used instead of resin for the upper pad, and stitching is now standard equipped for a higher quality feel.
*: Models with Multimedia System or Navigation System
| *A | Models with Multimedia System or Navigation System | - | - |
| *1 | Instrument Panel Upper Pad | *2 | Radio and Display Receiver Assembly |
| *3 | Combination Meter Assembly | *4 | Instrument Panel Safety Pad Cover No. 2 |
| *5 | Instrument Panel Safety Pad Cover No. 3 | - | - |
| *a | Stitch | - | - |
The instrument panel was made thinner, providing it with a more open appearance.
| *a | A - A Cross Section | *b | Instrument Panel Visible Angle |
The standard grade uses a black material for the center register and side register operation knobs, while the high grade uses plating.
| *A | Models with High Grade Register Knob | - | - |
| *1 | No. 1 Instrument Panel Register Assembly | *2 | Instrument Panel Register Control Knob |
| *3 | No. 1 Insert Parts Knob (Satin Plating) | - | - |
Open tray
Open trays are provided in the instrument panel box door sub-assembly No. 1/No. 2 and the console box upper. Because they are open, there is no need to open a cover, improving usability.
A mat made from a soft material (elastomer) is used on the bottom of the trays in the high grade type. Three colors are provided in order to allow coordination with the interior color.
| *1 | No. 2 Instrument Panel Box Door Sub-assembly | *2 | Box Bottom Mat |
| *3 | Console Box Upper | *4 | No. 1 Instrument Panel Box Door Sub-assembly |
Audio display
The face panel is painted piano black. (A in illustration)
The high grade audio display adds high-intensity silver paint to the sides, achieving a refined design. (B in illustration)
Heater control panel
A functional and large control dial is iconically located on the air conditioning control assembly.
All display items are concentrated in the glossy black face panel for a high degree of visibility.
| *A | Model with Auto Air Conditioner | *B | Model with Manual Air Conditioner |
| *1 | Heater Control Dial Knob | *2 | Face Panel |
The entire console was widened and the top surface was raised, producing a bold feel and achieving high degrees of operability and storage.
The shift lever is located near the driver seat for a high degree of operability. (A in illustration)
The console box upper and console cup holder box sub-assembly are located near the passengers for improved ease of use. (B in illustration)
The heights of the armrests were increased for easier arm resting. (C in illustration)
Combination meter
Different needle and dial* colors are used to differentiate the HV and gasoline models.
The silver rings with characteristic shapes and the instruments with delicate graduations express superior visibility and a refined image.
*: Models with 7-inch Color TFT LCD Display
| *A | HV Models | *B | Gasoline Models |
| *1 | Ring | *2 | Dial Plate |
| *3 | Needle | *4 | Display |
| *A | HV Models | *B | Gasoline Models |
| *1 | Ring | *2 | Dial Plate |
| *3 | Needle | *4 | Display |
Steering
General
A sporty 3-spoke type with function switches gathered on the left and right sides is used.
The high grade type steering uses genuine leather wrapping instead of urethane for the grip portion, and uses satin plated garnish around the steering pad for a more luxurious feel.
| No. | Component Parts | Standard Grade Type | High Grade Type |
|---|---|---|---|
| *1 | Steering Wheel | Urethane Form | Leather |
| *2 | Center Bezel | Black | Satin Chrome Plating |
Shift panel
The shift lever knob and drive mode switches are functionally gathered in the polygonal shaped console panel sub-assembly upper. As a result, the clean layout is expressed that is easy to use while producing a sense of excitement reminiscent of driving a true SUV.
| No. | Vehicle Type | Drive Type |
|---|---|---|
| *1 | Gasoline Models | 4WD/AWD (Models with GF2A Transfer) |
| *2 | Gasoline Models | 4WD/AWD (Models with GF1A Transfer) |
| *3 | Gasoline Models | 2WD |
| *4 | HV Models | 4WD/AWD (Models with Q610 Rear Traction Motor) |
| *5 | HV Models | 2WD |
Shift Lever Knob Sub-assembly
Except manual transaxle
A shifting hole cover that uses upholstery is used for the straight type, expressing a higher quality space.
The high grade type uses leather around the shift lever knob sub-assembly, and plating for the shift lever knob bezel. As a result, a sense of unity with the area around the instrument panel is emphasized for an even higher quality feel.
| No. | Component Parts | Standard Grade Type | High Grade Type |
|---|---|---|---|
| *1 | Shift Lever Knob Sub-assembly | - | |
| *2 | Shifting Hole Cover Sub-assembly | Black Synthetic Leather | |
| *3 | Shift Lever Knob Ornament | PVC (Material Color Black) | Black Leather |
| *4 | Shift Lever Knob Bezel | PVC (Material Color Black) | ABS (Satin Plating) |
| *5 | Shift Lever Knob | PVC (Material Color Black) | Black Leather |
Manual transaxle
A black flexible polyvinyl chloride material is used for the shift lever knob ornament to provide the standard type shift lever knob sub-assembly with a higher quality feel.
The high grade uses leather on the sides of the shift lever knob sub-assembly to provide a luxurious feel.
The shift lever knob is wrapped in genuine leather and satin plating is used on the shift lever knob bezel on the high grade type shift lever knob sub-assembly to emphasize a sense of unity with the instrument panel and provide a higher quality feel.
| No. | Component Parts | Standard Grade Type | High Grade Type |
|---|---|---|---|
| *1 | Shift Lever Knob Sub-assembly | - | |
| *2 | Shifting Hole Cover | Black Synthetic Leather | |
| *3 | Shift Lever Knob Ornament | ABS (Silver) | |
| *4 | Shift Lever Knob Bezel | ABS (Chrome Plating) | |
| *5 | Shift Lever Knob No. 1 | PVC (Material Color Black) | Black Leather |
Door
Door trim
The front and rear door trim ornaments use soft leather to improve comfort for passengers' shoulders and elbows. As a result, soft surfaces continue from the instrument panel, improving appearance.
The front and rear door assist grips focus on providing support during off-road driving, and use a thick and solid shape.
| *A | High Grade Type | *B | Standard Grade Type |
| *1 | Front Door Trim Cover Sub-assembly | *2 | Front Door Trim Ornament Sub-assembly |
| *3 | Rear Door Trim Cover Sub-assembly | *4 | Rear Door Trim Ornament Sub-assembly |
| *5 | Rear Door Trim Board Upper RH | - | - |
| *a | Soft Leather | *b | Hard Material |
A plate is positioned behind the stitching to help position it, achieving a sense of connectivity between the instrument panel and door trim. As a result, deviation in the stitching position is reduced and its appearance is improved. (High Grade Models)
| *1 | Front Door Trim Board Upper | *2 | Front Door Trim Cover Upper |
| *a | A - A Cross Section | *b | Stitching |
Front door grip
An outer mirror switch and power window switch are located immediately before the front door grip on the passenger side (*a in illustration). Switches can be operated without interference from the front door grips for a high degree of operability.
Convex cross sections are used for the shapes of the front and rear door grips, making the grips easy to get used to when held.
The high grade type uses a rubber material (elastomer) on the inside of the front door grips for a higher degree of operability. (*1 in illustration)
| *1 | Rubber Material | *2 | Front Door Assist Grip Cover |
| *3 | Front Door Trim Base | *4 | Front Door Assist Grip Assembly |
| *5 | Power Window Master Switch | *6 | Outer Mirror Switch |
| *a | Approaching the Occupant | *b | A - A Cross Section |
| *c | Inside | - | - |
Seat
A well-defined and solid design is used to express the strength of an SUV.
Stitching that is coordinated with the instrument panel and door trim* is used, expressing a strong and tough image with a high quality feel. (*a in illustration)
Laminated embossment is used to express a pattern that matches the polygonal motif pattern used throughout the interior (Models with laminated embossment). (*b in illustration)
Laminated embossment and stitching areas differs depending on the grade and model.
*: Models with high grade type door trim
| *A | Normal Type Seat | *B | Sports Type Seat |
| *a | Stitch | *b | Laminated Embossment |
| *c | Ribbon (Models with Adventure Grade) | - | - |
| *a | Stitch | *b | Laminated Embossment |
| *A | Models with Normal Type Front Seat | *B | Models with Sports Type Front Seat |
| *a | Stitch | *b | Laminated Embossment |
| *c | Ribbon (Models with Adventure Grade) | - | - |
Illumination
General
The instrument panel illumination and foot lights brightly illuminate to provide hospitality when the door is opened. The brightness is lowered when the vehicle is moving*, so as to not cause annoyance when driving.
Clear blue illumination is used throughout the interior, helping express a high-quality interior space.
*:Shift position other than P.
Illumination around the instrument panel
LED illumination is used as the light source in the instrument panel box door sub-assembly No. 1/No. 2, console box upper and console cup holder box sub-assembly, improving visibility at night.
| *1 | Driver Side Tray Light (No. 1 Interior Illumination Light Assembly) | *2 | Front Passenger Side Tray Light (Interior Illumination Light Sub-assembly) |
| *3 | Center Tray Light (No. 1 Interior Illumination Light Assembly) | *4 | Cup Holder Light (Console Box Illumination Light Assembly) |
Foot lights
The layout of the footwell light source is designed to pleasantly illuminate the foot area from the center of the occupant seat.
| *1 | Driver Side Inside Footwell Light (No. 1 Interior Illumination Light Assembly) | *2 | Front Passenger Side Inside Footwell Light (No. 2 Interior Illumination Light Assembly) |
Interior lights
Interior lights are used in the interior space and placed in optimal locations to improve usability and comfort.
| *1 | Map Light Assembly
·
Map Light |
*2 | Vanity Light |
| *3 | Dome Light (No. 1 Room Light Assembly) | *4 | Luggage Compartment Light Assembly |
Storage
Customer usage of storage areas was thoroughly analyzed to provide small storage spaces that take actual usage situations into consideration.
| *A | Except Models with Console Box Register Assembly | - | - |
| *1 | Instrument Panel Box Door Sub-assembly No. 1 | *2 | Glove Compartment Door Sub-assembly |
| *3 | Instrument Panel Box Door Sub-assembly No. 2 | *4 | Upper Console Box |
| *5 | Console Cup Holder Box Sub-assembly | *6 | Console Box Lower |
A removable console box pocket is provided in the console box. The orientation of the console box pocket can be changed 90°, allowing objects to be stored on the bottom of the console box.
| *A | Upper Position | *B | Not Attached |
| *C | Lower Position | - | - |
| *1 | Console Box Pocket | - | - |
| *a | Removal | *b | 90° Rotation |
| *c | Mount to Lower | - | - |
A small storage space is used in the overhead console.*
*: A small storage space availability differs depending on the model.
| *1 | Map Light Assembly | - | - |
| *a | Storage Space | - | - |
Door pockets
Door pockets are used in the door trim. The front door pocket is as wide as a horizontally-stored A4 piece of paper and can hold a plastic bottle.
The rear door pocket can hold a plastic bottle.
* Certain plastic bottles may not be able to be stored depending on the size and shape.
| *1 | Plastic Bottle | *2 | A4 piece of paper |
| *1 | Plastic Bottle | - | - |
A dual-level deck board that can be adjusted upward or downward is used.
When the deck board is set to the upper level, the rear floor finish plate and deck board surface heights are aligned, making it easier to insert and remove luggage. When the rear seat is folded down, the rear floor finish plate and rear seatback form a nearly flat surface, allowing long luggage to be stored.
| *1 | Deck Board Assembly | *2 | Deck Trim Side Panel Assembly |
| *3 | Rear Floor Finish Plate | - | - |
| *a | A - A Cross Section | *b | B - B Cross Section |
| *c | Nearly Flat | - | - |
When the deck board is set to the lower level, the height from the deck board to the ceiling expands, allowing tall luggage to be loaded.
| *1 | Deck Board Assembly | *2 | Deck Trim Side Panel Assembly |
| *a | A - A Cross Section | *b | Down amount compared with the upper position |
Deck board adopting self-standing structure (Except models with full size spare tire)
An self-standing structure is used for the deck board. The spare tire specification uses an independent deck board with a removable jack and spare tire.
| *1 | Deck Board Assembly | *2 | Spare Disc Wheel |
| *3 | Jack | - | - |
The repair kit specification uses an independent deck board with a removable jack and repair kit for easy access to the storage space.
| *1 | Deck Board Assembly | *2 | Jack |
| *3 | Storage | *4 | Tubeless Tire Repair Kit |
Deck space dimension and volume
The luggage compartment minimum width and length have been revised, improving luggage compartment volume and driving stability.
The deck is large enough to hold 4 golf bags (A in illustration) or 3 suitcases (B in illustration), creating a luggage compartment that is both easy to use and practical.*
*: The storage capacity varies depending on the size and shape.
| Deck Board Position | Upper Position or Models with Full Size Spare Tire | Lower Position | ||
| Volume L (cu.ft.) | 542 (19.1) | 580 (20.5) | ||
| Dimensions mm (in.) | *a | Luggage Compartment Height | 879 (34.6)*1 / 877(34.5)*2 | 933 (36.7)*1 / 931 (36.7)*2 |
| *b | Floor Depth | 1015 (40.0) | ||
| *c | Minimum Width of Floor | 1000 (39.4) | ||
| *d | Maximum Width of Floor | 1499 (59.0) | ||
*1: Models without sliding roof system or panoramic moon roof system
*2: Models with sliding roof system or panoramic moon roof system
A side pocket is used in the space to the rear of the rear wheelhouse. A partition board is provided for the standard grade type, while a net is provided for the high grade type. Both are removable for improved usability.*
*: Depending on the model, neither the deck trim pocket cover plate nor the room partition net assembly may be available.
| *1 | Deck Trim Pocket Cover Plate | - | - |
| *1 | Room Partition Net Assembly | - | - |
Functional Items and Equipment
Set the following equipment in consideration of usability
An accessory socket and AUX/USB jack are located in the console box upper to improve usability.*1
An accessory socket or charging USB jack is located in the console box, allowing devices to be charged when stored in the box.*2
An accessory socket or charging USB jack is located on the rear of the console, making it easy to use for passengers in the rear seat.
A rear seat register is provided to improve comfort for passengers in the rear seat.
Depending on the model, a wireless charger is provided in the console box upper in a location that allows devices that support wireless charging to be easily charged.
*1: Models with multimedia system or navigation system
*2: Depending on the model, neither the accessory socket nor the charging USB jack may be available.
| *A | Models with Multimedia System or Navigation System | *B | Models without USB Charger |
| *C | Models with USB Charger | - | - |
| *1 | No. 1 Stereo Jack Adapter Assembly | *2 | No. 1 Power Outlet Socket Assembly |
| *3 | Console Box Register Assembly | *4 | No. 2 Power Outlet Socket Assembly |
| *5 | USB Charger Socket | - | - |
| *A | Models with Mobile Wireless Charger Cradle Assembly | *B | Models without Mobile Wireless Charger Cradle Assembly |
| *C | Models with USB Charger | *D | Models without USB Charger |
| *1 | Mobile Wireless Charger Cradle Assembly | *2 | Console Box Upper |
| *3 | USB Charger Socket | *4 | No. 2 Power Outlet Socket Assembly |
| *A | Models with No. 1 Rear Power Outlet Socket Assembly | - | - |
| *1 | No. 1 Rear Power Outlet Socket Assembly | - | - |
Visor assembly
A large vanity mirror is used to provide a wider view and improve usability.
| *1 | Visor Assembly | *2 | Mirror |
| *a | Wider | - | - |
An extension is used in the sun visor. When the sun visor is used on the side, the extension can be extended to eliminate the gap between the center body pillar and sun visor, preventing glare from entering the vehicle from the side.*
*: Models with extension
| *1 | Visor Assembly | *2 | Plate Extension |
|
Extend | - | - |
Coat hooks are provided on the rear seat assist grips, improving usability by allowing suits or coats to be hung.
| *1 | Coat Hook | - | - |
| *a | A - A Cross Section | - | - |
Back door grip
Grip type handles are used for closing the back doors, expressing SUV-like toughness.
| *1 | Back Door Grip | - | - |
Reversible deck board (Except models with full size spare tire)
A reversible deck board assembly is used. Upholstery is used on the front surface and resin is used on the rear surface, allowing objects to be loaded without concern for getting the surface wet or dirty.
| *A | Front Surface | *B | Back Surface |
| *1 | Deck Board Assembly | - | - |
Interior Space
The footrest is designed so that the driver can rest his or her feet with a more natural posture. (Models without manual transaxle)
The footrest is wider for an increased feel of stability when in use.
The footrest is angled on the driver side, and the surface is curved following the shape of the soles of the feet.
| *1 | Toe Pad | - | - |
| *a | A - A Cross Section | *b | B - B Cross Section |
The top part of the roof headlining has a hollowed shape, ensuring head clearance.
| *a | A - A Cross Section | *b | Shape Avoided |
Deck side trim is used for the quarter body pillar, which was where the rear seat belt slot was positioned for conventional models. As a result, the quarter body pillar cross section is smaller, ensuring a wider view to the rear.
| *A | RAV4 | *B | Conventional Models |
| *1 | Rear Seat Belt Assembly Outer | - | - |
| *a | A - A Cross Section | *b | B - B Cross Section |
| *c | Viewable Angle | - | - |
Sound Absorbing and Vibration Damping Material
The floor mat No. 1 and No. 2 also function as sound insulation materials. Integrated type sound insulation materials are used instead of split type materials to further improve effectiveness. As a result, this has improved the coverage area of silencers on the floor.
| *A | HV Models | - | - |
| *1 | Floor Mat No. 1 | *2 | Floor Mat No. 2 |
Parallel ribs are provided around the entire circumference of the door trim, suppressing sound from outside the vehicle and ensuring a high level of quietness.
| *1 | Front Door Trim Panel Assembly | *2 | Rear Door Trim Panel Assembly |
| *3 | Resonator Rib | - | - |
| *a | A - A Cross Section | *b | B - B Cross Section |
Sound insulation materials are optimally placed throughout the interior to match acoustic characteristics. As a result, a quiet interior space is achieved.
| *A | Models with Standard Roof | *B | Models with Sliding Roof System |
| *C | Models with Panoramic Moon Roof System | *D | HV Models |
| *E | Models with Thinsulate | - | - |
| *1 | Roof Headlining Assembly | *2 | Roof Silencer Pad |
| *3 | Floor Carpet Assembly Front | *4 | Floor Mat No. 1 |
| *5 | Floor Mat No. 2 | *6 | Front Pillar Garnish Assembly |
| *7 | Center Pillar Garnish Assembly | *8 | Center Pillar Garnish Lower |
| *9 | Roof Side Garnish Inner | *10 | Rear Seat Side Garnish No. 3 |
| *11 | Deck Trim Side Panel Assembly | *12 | Thinsulate |
| *a | Sound Insulation Material | - | - |
Safety Features
A head impact absorbing structure is used for all models. As a result, impact to passengers' heads are reduced if passengers are subject to a secondary collision with the interior due to impact during a collision.
A door trim pad lower is used in the pelvic area of the front and rear door trim board sub-assembly. As a result, impact from the vehicle side to passengers is reduced, protecting passengers.
| *A | Models with Rear Door Trim Pad Lower | - | - |
| *1 | Front Door Trim Pad Center | *2 | Rear Door Trim Pad Lower |
| *a | Head Impact Mitigation Structure | - | - |