Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM (for HV Model) › from 2020.05
NM3620E _57 Power Source / Network _076581 NETWORKING _0373062 CAN COMMUNICATION SYSTEM(for HV Model) CO CONTROL F

NETWORKING  CAN COMMUNICATION SYSTEM(for HV Model)  CONTROL  CAN COMMUNICATION CONTROL  


FUNCTION


CAN Connection Components

*1: Models with parking assist monitor system or panoramic view monitor system

*2: Models with blind spot monitor system

*3: Models with Toyota Safety Sense

*4: Models with Toyota parking assist-sensor system

*5: Models with panoramic view monitor system

*6: Models with grille shutter system

*7: Models with vehicle proximity notification system

*8: Models with multimedia system or navigation system

*9: Models with bus buffer ECU

*10: Models with DCM

*11: Models with occupant classification system

*12: RHD models with power seat (for memory function)

*13: LHD models with power seat (for memory function)

*14: Models with power back door system

*15: Models with lithium-ion battery

Television Camera Assembly*1 Blind Spot Monitor Sensor LH*2
Forward Recognition Camera*3 Millimeter Wave Radar Sensor Assembly*3
Clearance Warning ECU Assembly*4 Parking Assist ECU*5
Swing Grille Actuator Assembly*6 Skid Control ECU
Central Gateway ECU (Network Gateway ECU) Inverter with Converter Assembly
Hybrid Vehicle Control ECU Vehicle Approaching Speaker Assembly*7
Radio and Display Receiver Assembly*8 Bus Buffer ECU*9
DCM (Telephone Transceiver Assembly)*10 Occupant Detection ECU*11
Parking Brake ECU Assembly Steering Sensor
Power Steering ECU ECM
Position Control ECU Assembly RH*12 Headlight ECU Sub-assembly RH
Certification ECU (Smart Key ECU Assembly) Air Conditioning Amplifier Assembly
Position Control ECU Assembly LH*13 Power Back Door ECU (Multiplex Network Door ECU)*14
Headlight ECU Sub-assembly LH Combination Meter Assembly
DLC3 Blind Spot Monitor Sensor RH*2
Battery ECU Assembly*15 -


DIAGNOSIS


a.

If a malfunction occurs on a CAN communication bus, ECUs that are connected to the CAN communication bus store Diagnostic Trouble Codes (DTCs) in memory.


b.

The 5-digit DTCs can be read by connecting the Global TechStream (GTS) to the DLC3.


c.

For details, refer to the Repair Manual.