| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate | Test Mode / Check Mode |
|---|---|---|---|---|---|
| U0154 | Lost Communication with Restraints Occupant Classification System Module | Communication stop occurs between the airbag sensor assembly and occupant detection ECU continuously for 5 seconds or more. | ·
CAN communication system ·
Occupant detection ECU ·
Airbag sensor assembly |
Comes on | Not applicable |
Clear the DTCs stored in memory.
Turn the power switch off.
Turn the power switch on (IG), and wait for at least 60 seconds.
Check for DTCs.
| Proceed to |
|---|
| DTC U0154 is not output |
| DTC U0154 is output |
DTC U0154 is not output
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
DTC U0154 is output