Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM
RM3620E _58 Vehicle Interior _076039 PRE-COLLISION _0369995 PRE-COLLISION SYSTEM W

PRE-COLLISION  PRE-COLLISION SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE PRE-COLLISION SYSTEM


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Make a note of the current settings before customizing.



a.

Customizing with the multi-information display

HINT:

The following PCS functions and the pre-collision system sensitivity setting can be changed from their default setting.


i.

Turn the ignition switch to ON.


ii.

Change pre-collision system settings by operating steering pad switch.

Settings
Customize Setting Description Default Setting
PCS Function that turns the pre-collision system on or off On On or Off
Sensitivity Function that selects the warning sensitivity of the pre-collision function Middle Early, Middle or Late



b.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Others.


v.

Select the setting by referring to the table below.

Others
Tester Display Description Default Setting ECU
PCS Function ON/OFF State Stored Refer to the table below Not Stored $00:Not Stored,$01:Stored Forward recognition camera
PCS Warning Timing State Stored 1 Refer to the table below Stored $00:Not Stored,$01:Stored Forward recognition camera
PCS Warning Timing State Stored 2 Refer to the table below Not Stored $00:Not Stored,$01:Stored Forward recognition camera
PCS Warning Timing State Stored 3 Refer to the table below Not Stored $00:Not Stored,$01:Stored Forward recognition camera
50006 98
Measurement Item
Customize Setting Description Setting
PCS Function ON/OFF State Stored Function to maintain the pre-collision system on/off setting when the ignition switch is turned to ON from off with the pre-collision function off. Not stored: Pre-collision system always turns on
Stored: Pre-collision system maintains off
PCS Warning Timing State Stored 1 Function to set whether or not to store the warning sensitivity setting when the PCS function is on and the ignition switch is turned from off to ON. Not stored: Sensitivity and CAUTION is reset to default setting
Stored: Sensitivity and CAUTION settings are maintained as previous value
PCS Warning Timing State Stored 2 Function to set whether or not to store the warning sensitivity setting when the PCS function is off and the ignition switch is turned from off to ON. Not stored: Sensitivity and CAUTION is reset to default setting
Stored: Sensitivity and CAUTION settings are maintained as previous value
PCS Warning Timing State Stored 3 Function to set whether or not to store the warning sensitivity setting when the PCS function is turned from off to on while the ignition switch is ON. Not stored: Sensitivity and CAUTION is reset to default setting
Stored: Sensitivity and CAUTION settings are maintained as previous value