81240
1.REMOVE NO. 1 ROOM LIGHT ASSEMBLY
| *a | Protective Tape |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped in protective tape, detach the claw and remove the No. 1 room light lens as shown in the illustration.
| *a | Protective Tape |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped in protective tape, detach the claw and guide and remove the No. 1 room light housing from the roof headlining assembly.
Detach the claw and guide and remove the No. 1 room light housing from the No. 1 room light switch base.
81240B
2.REMOVE NO. 1 ROOM LIGHT BULB
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Remove the No. 1 room light bulb as shown in the illustration.