CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM
The following items can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the GTS
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Customize Setting / Door Lock.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Unlock Key Twice | Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. | ON*1
OFF*2 |
0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Auto Lock | Function that locks all of the doors when the vehicle speed reaches a certain level. | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Auto Lock/Shift | for HV Model:
Function that locks all doors when the shift lever is moved out of P, with the power switch on (READY) and all doors closed for Gasoline Model:
Function that locks all doors when the shift lever is moved out of P, with the engine running and all doors closed*3 |
OFF | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Auto Unlock/Shift | for HV Model:
Function that unlocks all doors when the shift lever is moved to P from any position other than P with the power switch on (READY) for Gasoline Model:
Function that unlocks all doors when the shift lever is moved to P from any position other than P with the engine running*3 |
ON*1
OFF*2 |
0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| All Unlock/Open-Close | Function that unlocks the other doors when the driver door is opened within approximately 45 seconds of the ignition switch being turned off. | ON*4
OFF*4 |
0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
*1: w/ Canister Pump Module
*2: w/o Canister Pump Module
*3: except Manual Transaxle
*4: The default setting differs depending on the country.
Customizing with the Multi-display
Turn the ignition switch to ON.
Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Door lock settings.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| Speed sensitive auto locking | On | Function that locks all of the doors when the vehicle speed reaches a certain level. | On or Off | Main body ECU (Multiplex network body ECU) |
| Auto lock by shift from P | Off | for HV Model:
Function that locks all doors when the shift lever is moved out of P, with the power switch on (READY) and all doors closed for Gasoline Model:
Function that locks all doors when the shift lever is moved out of P, with the engine running and all doors closed*1 |
On or Off | Main body ECU (Multiplex network body ECU) |
| Auto unlock by shift to P | On*2
Off*3 |
for HV Model:
Function that unlocks all doors when the shift lever is moved to P from any position other than P with the power switch on (READY) for Gasoline Model:
Function that unlocks all doors when the shift lever is moved to P from any position other than P with the engine running*1 |
On or Off | Main body ECU (Multiplex network body ECU) |
| Auto unlock by driver door | On*4
Off*4 |
Function that unlocks the other doors when the driver door is opened within approximately 45 seconds of the ignition switch being turned off. | On or Off | Main body ECU (Multiplex network body ECU) |
*1: except Manual Transaxle
*2: w/ Canister Pump Module
*3: w/o Canister Pump Module
*4: The default setting differs depending on the country.