SELF-DIAGNOSTIC MODE (USING GTS)
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Utility / Wireless Door Lock Diagnosis Mode.
| Tester Display |
|---|
| Wireless Door Lock Diagnosis Mode |
Proceed to the next step in accordance with the prompts on the GTS screen.
Check that the system has switched to self-diagnostic mode by checking the interior light output pattern.
Check the diagnostic outputs when a door control transmitter module set sub-assembly switch is pressed. The diagnostic outputs can be checked by the interior light patterns.
| Interior Light Output | Suspected Area |
|---|---|
| A | Normal (No malfunction) |
| B | Register wireless code |
| C | Wave interference or malfunction of a related component |