Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM (for Gasoline Model)
RM3620E _51 Engine / Hybrid System _076038 CRUISE CONTROL _0370335 CRUISE CONTROL SYSTEM(for Gasoline Model) U

CRUISE CONTROL  CRUISE CONTROL SYSTEM(for Gasoline Model)  TERMINALS OF ECU  


CHECK ECM (for M20A-FKS)


A425145E06
1.833,0.792 2.281,1.042 0.448,0.25 5.448,0.813 5.896,1.063 0.448,0.25 1.938,0.833 2.396,1.031 0.458,0.198 10 false C40 5.542,0.865 6,1.063 0.458,0.198 10 false A24

HINT:

The standard voltage, resistance and waveform between each pair of the ECM terminals is shown in the table below. The appropriate conditions for checking each pair of the terminals is also indicated. The result of checks should be compared with the standard voltage, resistance and waveform for each pair of the terminals as displayed in the Specified Condition column. The illustration above can be used as a reference to identify the ECM terminal locations.


Tester Connection Wiring Color Terminal Description Condition Specified Condition
A24-21 (STP) - A24-10 (E1) SB - W-B Stop light switch assembly signal Brake pedal depressed 7.5 to 14 V
Brake pedal released Below 1.5 V
A24-22 (ST1-) - A24-10 (E1) LG - W-B Stop light switch assembly signal Ignition switch ON, Brake pedal depressed Below 1.5 V
Ignition switch ON, Brake pedal released 7.5 to 14 V
A24-27 (CCS) - A24-28 (ECCS) BE - BR Steering pad switch circuit Cruise control main switch not pushed 1 MΩ or higher
Cruise control main switch pushed Below 2.5 Ω
CANCEL switch ON 228 to 252 Ω
+RES switch ON 599 to 661 Ω
-SET switch ON 1463 to 1617 Ω


CHECK ECM (for A25A-FKS)


B460712E17
5.49,0.917 5.823,1.156 0.333,0.24 2.01,0.917 2.385,1.156 0.375,0.24 3.885,0.927 4.26,1.167 0.375,0.24 5.531,0.958 5.99,1.156 0.458,0.198 10 false A24 2.083,0.958 2.542,1.156 0.458,0.198 10 false C40 3.958,0.969 4.417,1.167 0.458,0.198 10 false C41

HINT:

The standard voltage, resistance and waveform between each pair of the ECM terminals is shown in the table below. The appropriate conditions for checking each pair of the terminals is also indicated. The result of checks should be compared with the standard voltage, resistance and waveform for each pair of the terminals as displayed in the Specified Condition column. The illustration above can be used as a reference to identify the ECM terminal locations.


Tester Connection Wiring Color Terminal Description Condition Specified Condition
A24-21 (STP) - A24-10 (E1) SB - W-B Stop light switch assembly signal Brake pedal depressed 7.5 to 14 V
Brake pedal released 0 to 1.5 V
A24-22 (ST1-) - A24-10 (E1) LG - W-B Stop light switch assembly signal Ignition switch ON, brake pedal depressed 0 to 1.5 V
Ignition switch ON, brake pedal released 7.5 to 14 V
A24-27 (CCS) - A24-28 (ECCS) BE - BR Steering pad switch circuit Cruise control main switch not pushed 1 MΩ or higher
Cruise control main switch pushed Below 2.5 Ω
CANCEL switch ON 228 to 252 Ω
+RES switch ON 599 to 661 Ω
-SET switch ON 1463 to 1617 Ω