PROBLEM SYMPTOM CONFIRMATION
Inspect the SET function.
| *1 | Steering Pad Switch Assembly |
| *2 | Cruise Control Main Switch |
| *3 | -SET Switch |
Turn the cruise control system on using the cruise control main switch.
Check that the cruise control indicator illuminates in the combination meter assembly.
Drive at approximately 30 km/h (20 mph) or higher.
Push the -SET switch.
| *a | Cruise Control Indicator |
| *b | Cruise Control SET Indicator |
Check that the cruise control SET indicator illuminates at this time.
After releasing the switch, check that the vehicle maintains the set speed.
| *1 | Steering Pad Switch Assembly |
| *2 | Cruise Control Main Switch |
| *3 | -SET Switch |
Inspect the + (ACCEL) function.
Turn the cruise control system on using the cruise control main switch.
Drive at approximately 30 km/h (20 mph) or higher.
Push the -SET switch.
| *1 | Steering Pad Switch Assembly |
| *2 | +RES Switch |
Check that vehicle speed increases while the +RES switch is pushed, and that the vehicle maintains the newly set speed when the switch is released.
Push the +RES switch and then release it immediately. Check that vehicle speed increases by approximately 1 km/h (1 mph) (tap-up control).
| *1 | Steering Pad Switch Assembly |
| *2 | Cruise Control Main Switch |
| *3 | -SET Switch |
Inspect the - (COAST) function.
Turn the cruise control system on using the cruise control main switch.
Drive at a approximately 30 km/h (20 mph) or higher.
Push the -SET switch.
Check that vehicle speed decreases while the -SET switch is pushed, and that the vehicle maintains the newly set speed when the switch is released.
Push the -SET switch, and then release it immediately. Check that vehicle speed decreases by approximately 1 km/h (1 mph) (tap-down control).
| *1 | Steering Pad Switch Assembly |
| *2 | Cruise Control Main Switch |
| *3 | -SET Switch |
Inspect the CANCEL function.
Turn the cruise control system on using the cruise control main switch.
Drive at approximately 30 km/h (20 mph) or higher.
Push the -SET switch.
| *1 | Steering Pad Switch Assembly |
| *2 | CANCEL Switch |
When any of the following are performed, check that control of vehicle speed by the cruise control system is canceled and that the normal driving mode (no control of vehicle speed by the cruise control system) resumes.
Depressing the brake pedal.
for Manual Transaxle:
Depressing the clutch pedal.
for CVT:
Moving the shift lever from D or M to any other position.
Selecting the M3, M2 or M1 range with the shift lever in M.
Selecting the D3, D2 or D1 range using the transmission shift switch assembly (shift paddle switch) with the shift lever in D.
for Automatic Transaxle:
Moving the shift lever from D or S to any other position.
Selecting the S3, S2 or S1 range with the shift lever in S.
Selecting the D3, D2 or D1 range using the transmission shift switch assembly (shift paddle switch) with the shift lever in D.
Pushing the CANCEL switch.
Turning the cruise control system off using the cruise control main switch (The stored vehicle speed in the ECM is not maintained.).
| *1 | Steering Pad Switch Assembly |
| *2 | Cruise Control Main Switch |
| *3 | -SET Switch |
Inspect the RES (RESUME) function.
Turn the cruise control system on using the cruise control main switch.
Drive at approximately 30 km/h (20 mph) or higher.
Push the -SET switch.
Cancel control of vehicle speed by the cruise control system by performing any of the above operations (other than turning the cruise control system off using the cruise control main switch).
| *1 | Steering Pad Switch Assembly |
| *2 | +RES Switch |
After pushing the +RES switch at a speed of more than 30 km/h (20 mph), check that the vehicle resumes the speed set prior to cancellation.