Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM (for HV Model)
RM3620E _51 Engine / Hybrid System _076038 CRUISE CONTROL _0370336 CRUISE CONTROL SYSTEM(for HV Model) L

CRUISE CONTROL  CRUISE CONTROL SYSTEM(for HV Model)  PRECAUTION  


PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL


NOTICE:

When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following systems after the cable is reconnected.

System Name See Procedure
Lane Control System (Click here)
Parking Support Brake System (for HV Model)
Pre-collision System
Parking Assist Monitor System
Panoramic View Monitor System (for HV Model)
Power Back Door System (for HV Model)
Power Door Lock Control System



HANDLING PRECAUTION FOR CRUISE CONTROL SYSTEM


a.

Turn the cruise control system off using the cruise control main switch when not using the cruise control system.


b.

Be careful of increasing vehicle speed when driving the vehicle in cruise control on downhill slopes.


c.

The + (ACCEL)/RES (RESUME) operation changes according to the cruise control system status. When the cruise control system is controlling vehicle speed, the + (ACCEL) function operates. When the cruise control system is not controlling vehicle speed, the RES (RESUME) function operates.


d.

While the cruise control system is controlling vehicle speed, if the cruise control indicator turns off and a warning message is displayed, turn the cruise control system off using the cruise control main switch to reset the cruise control system. After the cruise control system is reset, if the cruise control system does not turn on, or if the cruise control system stops functioning immediately after being turned on, there may be a malfunction.


e.

Do not use the cruise control system where the road conditions are as follows:

·

Heavy traffic

·

Steep downhill roads

·

Roads with sharp turns

·

Icy or snowy roads

·

Slippery roads



f.

Do not use the cruise control system while towing.