Home › Drivetrain › UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE) › SHIFT LEVER
RM3620E _52 Drivetrain _076122 UB80E AUTOMATIC TRANSMISSION / TRANSAXLE _0370684 SHIFT LEVER A

UB80E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 35974 1.INSTALL LOWER POSITION INDICATOR HOUSING

a.
C402709

Engage the 4 claws and 2 guides to install the lower position indicator housing to the shift lock control unit assembly.

NOTICE:

Do not damage the lower position indicator housing.



Hide 35978 2.INSTALL SHIFT POSITION INDICATOR

HINT:

Only perform this procedure when replacement of the shift position indicator is necessary.


a.
C402707

Engage the 2 claws and 3 screws to install the shift position indicator to the upper console panel sub-assembly.


b.
C402705

Engage the clamp to connect the wire harness.


Hide 58848 3.INSTALL SHIFT LEVER HOLE COVER

a.
C402721

Engage the 2 claws to install the shift lever hole cover to the upper console panel sub-assembly.