Home › Drivetrain › UB80F (AUTOMATIC TRANSMISSION / TRANSAXLE) › DIFFERENTIAL CASE
RM3620E _52 Drivetrain _076123 UB80F AUTOMATIC TRANSMISSION / TRANSAXLE _0370711 DIFFERENTIAL CASE A

UB80F AUTOMATIC TRANSMISSION / TRANSAXLE  DIFFERENTIAL CASE  DISASSEMBLY  


PROCEDURE

Hide 43410M 1.REMOVE FRONT DRIVE SHAFT OIL SEAL RH

a.
C402907N01
1.583,1.052 2,0.667 2,0.667 2.167,0.667 false 2.208,0.583 2.625,0.75 0.417,0.167 10 false SST

Hold the differential case assembly in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.



b.

Using SST, remove the front drive shaft oil seal RH from the differential case assembly.

SST
09308-00010  

NOTICE:

Be careful not to damage the oil seal installation surface of the differential case assembly.



Hide 2.REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING (OUTER RACE)

a.
C372542N01
0.49,0.833 0.74,0.833 false 0.188,0.75 0.542,0.969 0.354,0.219 10 false SST

Using SST, remove the front differential case rear tapered roller bearing (outer race) from the automatic transaxle case sub-assembly.

SST
09308-36010  

NOTICE:

Be careful not to damage the automatic transaxle case sub-assembly.


HINT:
C372543

Align the claw of SST with the indentation of the automatic transaxle case sub-assembly when removing the parts.



Hide 3.REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING (INNER RACE)

a.
C372545N01
0.802,0.719 1.198,0.719 false 0.615,2.115 1.573,1.823 true 0.51,0.635 0.896,0.844 0.385,0.208 10 false SST 0.323,2.052 0.708,2.26 0.385,0.208 10 false SST

Using SST, remove the front differential case rear tapered roller bearing (inner race) from the differential case assembly.

SST
09950-40011  (09951-04010, 09952-04010, 09953-04030, 09954-04020, 09955-04011, 09957-04010, 09958-04011)
09950-60011  (09951-00340, 09951-00440, 09952-06010)

NOTICE:

Because SST is attached to the roller portion, there is a possibility that the roller portion could break and SST could come off before the front differential case rear tapered roller bearing (inner race) comes off.



b.
C372546N01
0.802,0.698 1.156,0.698 false 0.542,2.146 1.531,1.802 true 0.51,0.625 0.927,0.885 0.417,0.26 10 false SST 0.25,2.073 0.667,2.333 0.417,0.26 10 false SST

If the roller portion breaks and SST comes off, reattach SST to the inner race in the position shown in the illustration, and continue removing the parts.

SST
09950-40011  (09951-04010, 09952-04010, 09953-04030, 09954-04020, 09955-04011, 09957-04010, 09958-04011)
09950-60011  (09951-00340, 09951-00440, 09952-06010)


Hide 4.REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING (OUTER RACE)

a.
C372548N01
1.896,1.135 2.365,1.135 false 1.594,1.063 1.969,1.271 0.375,0.208 10 false SST

Using SST, remove the front differential case front tapered roller bearing (outer race) and differential drive pinion shim from the transaxle housing.

SST
09308-36010  

NOTICE:

Be careful not to damage the transaxle housing.


HINT:
C372549

Align the claw of SST with the indentation of the transaxle housing when removing the parts.



Hide 5.REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING (INNER RACE)

a.
C402908N01
1.073,0.594 1.396,0.313 false 1.563,2.031 2,2.5 2,2.5 2.167,2.5 false 0.417,1.417 0.865,1.563 true 1.438,0.219 1.896,0.417 0.458,0.198 10 false SST 2.208,2.417 2.625,2.583 0.417,0.167 10 false SST 0.083,1.333 0.583,1.5 0.5,0.167 10 false SST

Using SST, remove the front differential case front tapered roller bearing (inner race) from the differential case assembly.

SST
09950-00020  
09950-00030  
09950-60011  (09951-00530)