Home › Drivetrain › UB80F (AUTOMATIC TRANSMISSION / TRANSAXLE) › DIFFERENTIAL CASE
RM3620E _52 Drivetrain _076123 UB80F AUTOMATIC TRANSMISSION / TRANSAXLE _0370711 DIFFERENTIAL CASE A

UB80F AUTOMATIC TRANSMISSION / TRANSAXLE  DIFFERENTIAL CASE  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING (INNER RACE)

a.
C402911N01
0.75,0.667 1.219,0.667 false 1.146,1.073 0.75,1 0.75,1 1.115,0.885 false 0.417,0.583 0.833,0.75 0.417,0.167 10 false SST 0.417,0.917 0.833,1.083 0.417,0.167 10 false SST

Using SST and a press, install a new front differential case front tapered roller bearing (inner race) to the differential case assembly.

SST
09316-20011  
09513-36040  

NOTICE:
·

Do not damage the front differential case front tapered roller bearing (inner race) cage when installing the front differential case front tapered roller bearing (inner race).

·

Be sure to install the front differential case front tapered roller bearing (inner race) so that there is no clearance between the front differential case front tapered roller bearing (inner race) and the differential case assembly. If there is any clearance, the turning torque of the differential case assembly cannot be measured correctly.




Hide 2.INSTALL FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING (OUTER RACE)

a.
C402912N01
2.583,2.417 2.583,3.083 2.583,3.083 2.75,3.083 true 2.583,1.5 2.833,1 2.833,1 2.917,1 true 2.792,3 3.208,3.167 0.417,0.167 10 false SST 2.958,0.917 3.375,1.083 0.417,0.167 10 false SST

Using SST and a hammer, install the differential drive pinion shim and a new front differential case front tapered roller bearing (outer race) to the transaxle housing.

SST
09950-60021  (09951-00890)
09950-70010  (09951-07200)

NOTICE:

Be sure to install the front differential case front tapered roller bearing (outer race) so that there is no clearance between the front differential case front tapered roller bearing (outer race), differential drive pinion shim and the transaxle housing. If there is any clearance, the turning torque of the differential case assembly cannot be measured correctly.



Hide 3.INSTALL FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING (INNER RACE)

a.
C372547N01
0.844,0.74 0.469,0.5 0.469,0.5 0.938,0.573 false 1.01,1.042 1.448,1.792 true 1.49,1.729 1.854,1.927 0.365,0.198 10 false SST 0.177,0.417 0.542,0.615 0.365,0.198 10 false SST

Using SST and a press, install a new front differential case rear tapered roller bearing (inner race) to the differential case assembly.

SST
09316-20011  
09950-60021  (09951-00890)
09950-70010  (09951-07200)

NOTICE:
·

Do not damage the front differential case rear tapered roller bearing (inner race) cage when installing the front differential case rear tapered roller bearing (inner race).

·

Be sure to install the front differential case rear tapered roller bearing (inner race) so that there is no clearance between the front differential case rear tapered roller bearing (inner race) and the differential case assembly. If there is any clearance, the turning torque of the differential case assembly cannot be measured correctly.




Hide 4.INSTALL FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING (OUTER RACE)

a.
C372544N01
0.635,1.896 0.385,1.313 0.385,1.313 0.708,1.427 true 0.094,1.229 0.479,1.438 0.385,0.208 10 false SST

Using SST and a hammer, install a new front differential case rear tapered roller bearing (outer race) to the automatic transaxle case sub-assembly.

SST
09950-60021  (09951-00790)
09950-70010  (09951-07200)

NOTICE:

Be sure to install the front differential case rear tapered roller bearing (outer race) so that there is no clearance between the front differential case rear tapered roller bearing (outer race) and the automatic transaxle case sub-assembly. If there is any clearance, the turning torque of the differential case assembly cannot be measured correctly.



Hide 43410M 5.INSTALL FRONT DRIVE SHAFT OIL SEAL RH

a.

Hold the differential case assembly in a vise between aluminum plates.


b.

Coat the lip of a new front drive shaft oil seal RH with MP grease.


c.
C402913N01
2.396,1.729 2.667,1.583 2.667,1.583 2.833,1.583 false 1.688,1.198 2.25,0.583 2.25,0.583 2.417,0.583 true 2.865,1.5 3.281,1.667 0.417,0.167 10 false SST 2.458,0.5 2.875,0.667 0.417,0.167 10 false SST

Using SST and a hammer, install a new front drive shaft oil seal RH to the differential case assembly.

SST
09950-60011  (09951-00410)
09950-70010  (09951-07200)

Standard Depth:

21.5 to 22.5 mm (0.846 to 0.886 in.)


NOTICE:

Do not damage the lip of the front drive shaft oil seal RH.