DESCRIPTION
Whenever a lane control system DTC is stored, the forward recognition camera stores the current vehicle state (ECU and sensor information) as Freeze Frame Data.
CHECK FREEZE FRAME DATA
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Chassis / Lane Control / Trouble Codes.
According to the GTS display, select a DTC that stored freeze frame data.
Read the freeze frame data recorded when the DTC was stored.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Total Distance Traveled | Total distance traveled | 0 to 16777215 | - | Not used |
| Total Distance Traveled - Unit | Unit used for total distance traveled | km or mile | - | Not used |
| LDA Control | Whether lane control system is permitted or not | Prohibit or Permit | Prohibited: Lane control system control is not possible
Permitted: Lane control system control is possible |
- |
| Turn Switch (Right) | Turn signal switch (right) status | OFF or ON | ON: Turn signal light switch on (right)
OFF: Turn signal light switch off |
- |
| Turn Switch (Left) | Turn signal switch (left) status | OFF or ON | ON: Turn signal light switch on (left)
OFF: Turn signal light switch off |
- |
| Vehicle Information (2WD/4WD) | Vehicle information (drivetrain) stored in forward recognition camera | 2WD, 4WD or Unknown | - | Not used |
| Vehicle Information (Conv/HV) | Vehicle information (conventional/hybrid) stored in forward recognition camera | Conv, HV or Unknown | - | Not used |