When a malfunction is detected between various ECUs and sensors, these DTCs are stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U010087 | Lost Communication With ECM/PCM "A" Missing Message | While the vehicle speed is 5 km/h (4 mph), a communication error between the ECM sensor and the forward recognition camera is detected for approximately 5 seconds or more. | CAN communication system |
| U012587 | Lost Communication with Multi-axis Acceleration Sensor Module Missing Message | While the vehicle speed is 5 km/h (4 mph), a communication error between the airbag sensor assembly and the forward recognition camera is detected for approximately 5 seconds or more. | CAN communication system |
| U012687 | Lost Communication with Steering Angle Sensor Module Missing Message | 3 seconds after the ignition switch is turned to ON, a communication error between the steering sensor and the forward recognition camera is detected for approximately 5 seconds or more. | CAN communication system |
| U012987 | Lost Communication with Brake System Control Module Missing Message | 3 seconds after the ignition switch is turned to ON, a communication error between the skid control ECU and the forward recognition camera is detected for approximately 5 seconds or more. | CAN communication system |
| U013187 | Lost Communication with Power Steering Control Module Missing Message | 3 seconds after the ignition switch is turned to ON, a communication error between the rack and pinion power steering gear assembly (power steering ECU) and the forward recognition camera is detected for approximately 5 seconds or more. | CAN communication system |
| U015587 | Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message | 3 seconds after the ignition switch is turned to ON, a communication error between the combination meter assembly and the forward recognition camera is detected for approximately 50 seconds or more. | CAN communication system |
| U029387 | Lost Communication With Hybrid Powertrain Control Module Missing Message | 3 seconds after the ignition switch is turned to ON, a communication error between the hybrid vehicle control ECU assembly and the forward recognition camera is detected for approximately 5 seconds or more. | CAN communication system |
Clear the DTCs.
Click hereEngine / Hybrid System>CRUISE CONTROL>LANE CONTROL SYSTEM>DTC CHECK / CLEAR
Make sure that the DTC detection conditions are met.
If the conditions are not met, the system cannot detect the malfunction.
Check for DTCs.
Click hereEngine / Hybrid System>CRUISE CONTROL>LANE CONTROL SYSTEM>DTC CHECK / CLEAR
| Result | Proceed to |
|---|---|
| DTC U010087, U012587, U012687, U012987, U013187, U015587 and U029387 are not output | A |
| DTC U010087, U012587, U012687, U012987, U013187, U015587 or U029387 is output | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B