Home › Power Source / Network › NETWORKING › LIN COMMUNICATION SYSTEM
RM3620E _57 Power Source / Network _076016 NETWORKING _0371251 LIN COMMUNICATION SYSTEM D

NETWORKING  LIN COMMUNICATION SYSTEM  SYSTEM DESCRIPTION  


LIN COMMUNICATION SYSTEM DESCRIPTION


The LIN communication system is used for communication between the components in the tables below. If communication cannot be performed through LIN communication such as when there is an open or short in a communication line, the master control ECU of the relevant system will store a DTC. Refer to the table below about the communication bus lines and connected components.

HINT:
·

Each component has a fail-safe function which operates in the event of a malfunction to protect the system and allow communication between other components to continue.

·

In the following table, "○" indicates that the function applies, and "-" indicates that it does not.



Door Bus Lines
Component Master Control LIN Communication DTC Output Function

*1: w/ Sliding Roof System

*2: w/ Panoramic Moon Roof System

*3: w/ Double Locking System

*4: w/ Hands Free Power Back Door

Main Body ECU (Multiplex Network Body ECU) ○ ○
Multiplex Network Master Switch Assembly - -
Front Power Window Regulator Motor Assembly LH - -
Front Power Window Regulator Motor Assembly RH - -
Rear Power Window Regulator Motor Assembly LH - -
Rear Power Window Regulator Motor Assembly RH - -
Sliding Roof ECU (Sliding Roof Drive Gear Sub-assembly)*1 - -
Sliding Roof ECU (Sliding Roof Drive Gear Assembly)*2 - -
Double Lock Door Control Relay Assembly*3 - -
Kick Door Control Sensor*4 - -

Certification Bus Lines (w/ Entry and Start System)
Component Master Control LIN Communication DTC Output Function
Certification ECU (Smart Key ECU Assembly) ○ ○
Steering Lock ECU (Steering Lock Actuator or Upper Bracket Assembly) - -
ID Code Box (Immobiliser Code ECU) - -