BLIND SPOT MONITOR SENSOR LH (MASTER)
| Terminal No.
(Symbol) |
Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| Q1-4 (OMIL) - Q1-10 (BLGD) | R - W-B | Outer rear view mirror indicator LH power source | Outer rear view mirror indicator LH illuminated | 3.5 to 9.5 V |
| Outer rear view mirror indicator LH blinking | Alternating between 0 to 9.5 V | |||
| Outer rear view mirror indicator LH not illuminated | Below 1 V | |||
| Q1-5 (BLB) - Q1-10 (BLGD) | B - W-B | IG power source | Ignition switch off | Below 1 V |
| Ignition switch ON | 10.5 to 16 V*1
11 to 14 V*2 |
|||
| Q1-10 (BLGD) - Body Ground | W-B - Body ground | Ground | Always | Below 1 Ω |
*1: w/ Stop and Start System
*2: w/o Stop and Start System
BLIND SPOT MONITOR SENSOR RH (SLAVE)
| Terminal No.
(Symbol) |
Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| Q13-3 (BUZ) - Q13-10 (BRGD) | W - W-B | RCTA buzzer (blind spot monitor buzzer) operation signal | RCTA buzzer (blind spot monitor buzzer) not sounding | 11 to 14 V |
| RCTA buzzer (blind spot monitor buzzer) sounding | Alternating between 0 to 14 V | |||
| Q13-4 (OMIR) - Q13-10 (BRGD) | R - W-B | Outer rear view mirror indicator RH power source | Outer rear view mirror indicator RH illuminated | 3.5 to 9.5 V |
| Outer rear view mirror indicator RH blinking | Alternating between 0 to 9.5 V | |||
| Outer rear view mirror indicator RH not illuminated | Below 1 V | |||
| Q13-8 (SPR) - Q13-10 (BRGD)*3 | P - W-B | Shift position switch signal | Ignition switch ON, shift lever in R | 11 to 14 V |
| Ignition switch ON, shift lever not in R | Below 1 V | |||
| Q13-5 (BRB) - Q13-10 (BRGD) | B - W-B | IG power source | Ignition switch off | Below 1 V |
| Ignition switch ON | 10.5 to 16 V*1
11 to 14 V*2 |
|||
| Q13-10 (BRGD) - Body Ground | W-B - Body ground | Ground | Always | Below 1 Ω |
*1: w/ Stop and Start System
*2: w/o Stop and Start System
*3: for Manual Transaxle