INITIALIZE PARKING ASSIST MONITOR SYSTEM
When the "!" mark is displayed on the radio and display receiver assembly, correct the steering angle neutral point using the following method.
Fully turn the steering wheel to the right and left on level ground.
Memorizing the steering angle neutral point must be carried out with the ignition switch START. Apply the parking brake, depress the brake pedal, check that the shift position is in P*1 or N*2, and ensure that the vehicle is not moving.
*1: except Manual Transaxle
*2: for Manual Transaxle
If the "!" mark is displayed on the image of the area behind the vehicle with the steering wheel fully turned to the right or left, perform "Steering Angle Setting in Calibration".
Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM>CALIBRATION