Home › Drivetrain › EG62 (MANUAL TRANSMISSION / TRANSAXLE) › OUTPUT SHAFT
RM3620E _52 Drivetrain _076270 EG62 MANUAL TRANSMISSION / TRANSAXLE _0371324 OUTPUT SHAFT A

EG62 MANUAL TRANSMISSION / TRANSAXLE  OUTPUT SHAFT  DISASSEMBLY  


PROCEDURE

Hide 33429B 5.REMOVE 6TH DRIVEN GEAR

a.
C397129C01
0.76,1.688 0.417,1.167 0.417,1.167 0.781,1.406 true 2.156,1.146 2.365,1.375 false 2.115,1.406 2.313,1.469 false 0.417,1.167 0.563,1.677 false 1.99,1.042 2.302,1.198 0.313,0.156 10 false *1 1.958,1.313 2.271,1.469 0.313,0.156 10 false *2 0.115,1.083 0.573,1.281 0.458,0.198 10 false SST
*1 Rear Output Shaft Bearing (Inner Race)
*2 6th Driven Gear


Using SST and a press, remove the rear output shaft bearing (inner race) and 6th driven gear from the output shaft.

SST
09527-21011  
09950-60011  (09951-00300)
09950-70010  (09951-07100)

NOTICE:

Support the output shaft by hand to prevent it from dropping.



Hide 33431C 6.REMOVE OUTPUT GEAR SPACER (between 6th driven gear and 5th driven gear)

a.
C397130

Remove the output gear spacer from the output shaft.


Hide 33422B 7.REMOVE 4TH DRIVEN GEAR

a.
C397131C01
0.323,1.385 0.479,1.771 false 2.083,0.865 2.281,1.135 false 2.094,1.167 2.26,1.25 false 1.938,0.76 2.25,0.917 0.313,0.156 10 false *1 1.948,1.073 2.26,1.229 0.313,0.156 10 false *2 0.031,1.292 0.49,1.49 0.458,0.198 10 false SST
*1 5th Driven Gear
*2 4th Driven Gear


Using SST and a press, remove the 5th driven gear and 4th driven gear from the output shaft.

SST
09527-21011  

NOTICE:

Support the output shaft by hand to prevent it from dropping.



Hide 33431C 8.REMOVE OUTPUT GEAR SPACER (between 4th driven gear and 3rd driven gear)

a.
C397132

Remove the output gear spacer from the output shaft.


Hide 33332 9.REMOVE 2ND GEAR

a.
C397133C01
0.479,1.302 0.813,1.948 false 2.271,1.01 2.479,1.354 false 2.25,1.333 2.354,1.458 false 2.115,0.917 2.427,1.073 0.313,0.156 10 false *1 2.104,1.24 2.417,1.396 0.313,0.156 10 false *2 0.167,1.208 0.625,1.406 0.458,0.198 10 false SST
*1 3rd Driven Gear
*2 2nd Gear


Using SST and a press, remove the 3rd driven gear and 2nd gear from the output shaft.

SST
09950-00020  

NOTICE:
·

Do not tighten SST excessively.

·

Support the output shaft by hand to prevent it from dropping.




Hide 33356A 10.REMOVE INNER 2ND GEAR BEARING RACE

a.
C397134

Remove the inner 2nd gear bearing race from the output shaft.


b.
C397135

Using a Magnet Hand, remove the inner 2nd gear bearing race lock ball from the output shaft.


Hide 33037B 11.REMOVE NO. 1 SYNCHRONIZER RING SET (for 2nd Gear)

a.
C397136C01
0.063,0.25 1.448,2.219 1.385,1.969 0.333,0.5 0.5,0.5 false 0.313,1.198 0.479,1.198 false 0.302,1.854 0.438,1.854 false 0.104,0.063 0.417,0.219 0.313,0.156 10 false *1 0.167,0.406 0.479,0.563 0.313,0.156 10 false *a 0.156,1.094 0.469,1.25 0.313,0.156 10 false *b 0.146,1.76 0.458,1.917 0.313,0.156 10 false *c
*1 No. 1 Synchronizer Ring Set (for 2nd Gear)
*a Inner Ring
*b Middle Ring
*c Outer Ring


Remove the No. 1 synchronizer ring set (for 2nd gear) from the No. 1 transmission clutch hub.


Hide 33361 12.REMOVE NO. 1 TRANSMISSION CLUTCH HUB

a.
C397137

Remove the No. 1 transmission clutch hub together with the No. 1 transmission hub sleeve and 3 No. 1 synchromesh shifting keys from the output shaft.


b.
C397138

Remove the No. 1 transmission hub sleeve and 3 No. 1 synchromesh shifting keys from the No. 1 transmission clutch hub.


Hide 33348 13.REMOVE 1ST GEAR THRUST WASHER

a.
C397139

Remove the 1st gear thrust washer from the output shaft.


Hide 33037B 14.REMOVE NO. 1 SYNCHRONIZER RING SET (for 1st Gear)

a.
C397140C01
0.031,0.271 1.417,2.323 1.385,2.052 0.344,2.104 0.542,2.104 false 0.292,1.344 0.49,1.344 false 0.25,0.615 0.448,0.615 false 0.063,0.073 0.375,0.229 0.313,0.156 10 false *1 0.177,2 0.49,2.156 0.313,0.156 10 false *a 0.135,1.25 0.448,1.406 0.313,0.156 10 false *b 0.104,0.51 0.417,0.667 0.313,0.156 10 false *c
*1 No. 1 Synchronizer Ring Set (for 1st Gear)
*a Inner Ring
*b Middle Ring
*c Outer Ring


Remove the No. 1 synchronizer ring set (for 1st gear) from the 1st gear.


Hide 33335 15.REMOVE 1ST GEAR

a.
C397141

Remove the 1st gear together with the 1st gear needle roller bearing from the output shaft.


b.
C397142

Remove the 1st gear needle roller bearing from the 1st gear.


Hide 33345 16.REMOVE 1ST GEAR BUSHING

a.
C397143

Remove the 1st gear needle roller bearing from the 1st gear bushing.


b.
C397144

Remove the 1st gear bushing from the output shaft.


Hide 33321N 17.REMOVE FRONT OUTPUT SHAFT BEARING (INNER RACE)

a.
C397145N01
1.135,1.771 0.583,1.417 0.583,1.417 1.125,2.052 true 0.583,1.417 0.781,1.927 false 0.281,1.333 0.74,1.531 0.458,0.198 10 false SST

Using SST and a press, remove the front output shaft bearing (inner race) from the output shaft.

SST
09950-00020  
09950-60011  (09951-00320)
09950-70010  (09951-07100)

NOTICE:
·

Do not tighten SST excessively.

·

Support the output shaft by hand to prevent it from dropping.