Home › Drivetrain › EG62 (MANUAL TRANSMISSION / TRANSAXLE) › OUTPUT SHAFT
RM3620E _52 Drivetrain _076270 EG62 MANUAL TRANSMISSION / TRANSAXLE _0371324 OUTPUT SHAFT A

EG62 MANUAL TRANSMISSION / TRANSAXLE  OUTPUT SHAFT  REASSEMBLY  


PROCEDURE

Hide 33321N 1.INSTALL FRONT OUTPUT SHAFT BEARING (INNER RACE)

a.
C397230N01
1.104,1.906 0.688,1.792 0.688,1.792 1.031,2.188 false 0.385,1.698 0.844,1.896 0.458,0.198 10 false SST

Using SST and a press, install a new front output shaft bearing (inner race) to the output shaft.

SST
09950-60011  (09951-00460)
09950-70010  (09951-07100)

NOTICE:

Do not deform the front output shaft bearing (inner race) cage.



Hide 33345 2.INSTALL 1ST GEAR BUSHING

a.
C397144

Coat the 1st gear bushing with gear oil and install it to the output shaft.


b.
C397231

Coat the 1st gear needle roller bearing with gear oil and install it to the 1st gear bushing.


Hide 33335 3.INSTALL 1ST GEAR

a.
C397232

Coat the 1st gear needle roller bearing with gear oil and install it to the 1st gear.


b.
C397233

Coat the 1st gear with gear oil and install it to the output shaft.


Hide 33037B 4.INSTALL NO. 1 SYNCHRONIZER RING SET (for 1st Gear)

a.

Coat the 1st gear cone and No. 1 synchronizer ring set (inner ring, middle ring and outer ring) with gear oil.


b.
C397234C01
0.698,1.802 1.281,1.802 false 0.667,1.271 1.25,1.271 false 0.625,0.708 1.208,0.708 false 0.531,1.698 0.844,1.854 0.313,0.156 10 false *a 0.5,1.177 0.813,1.333 0.313,0.156 10 false *b 0.469,0.604 0.781,0.76 0.313,0.156 10 false *c
*a Inner Ring
*b Middle Ring
*c Outer Ring


Install the inner ring to the 1st gear.


c.

Install the middle ring to the 1st gear.

NOTICE:

Align the protrusions of the middle ring with the cutouts of the 1st gear.



d.

Install the outer ring to the 1st gear.

NOTICE:

Align the protrusions of the inner ring with the cutouts of the outer ring.



Hide 33348 5.INSTALL 1ST GEAR THRUST WASHER

a.
C397139

Install the 1st gear thrust washer to the No. 1 output shaft.


Hide 33361 6.INSTALL NO. 1 TRANSMISSION CLUTCH HUB

a.
C397235

Install the No. 1 transmission clutch hub to the No. 1 transmission hub sleeve.


b.
C397236

Install the 3 No. 1 synchromesh shifting keys to the No. 1 transmission clutch hub.


c.
C397237

Install the No. 1 transmission clutch hub together with the No. 1 transmission hub sleeve and 3 No. 1 synchromesh shifting keys to the output shaft.

NOTICE:

Align the protrusions of the outer ring with the cutouts of the No. 1 transmission clutch hub.



Hide 33037B 7.INSTALL NO. 1 SYNCHRONIZER RING SET (for 2nd Gear)

a.

Coat the No. 1 synchronizer ring set (inner ring, middle ring and outer ring) with gear oil.


b.
C397238

Install the outer ring to the No. 1 transmission clutch hub.

NOTICE:

Align the protrusions of the outer ring with the cutouts of the No. 1 transmission clutch hub.



c.
C397239

Install the middle ring to the outer ring.


d.
C397240

Install the inner ring to the middle ring.

NOTICE:

Align the protrusions of the inner ring with the cutouts of the outer ring.



Hide 33356A 8.INSTALL INNER 2ND GEAR BEARING RACE

a.
C397241

Install the inner 2nd gear bearing race lock ball to the output shaft.


b.
C397242

Coat the inner 2nd gear bearing race with gear oil and install it to the output shaft.

NOTICE:

Align the inner 2nd gear bearing race lock ball with the groove of the inner 2nd gear bearing race.



Hide 33332 9.INSTALL 2ND GEAR

a.
C397243

Coat the 2nd gear with gear oil and install it to the output shaft.

NOTICE:

Align the protrusions of the middle ring with the cutouts of the 2nd gear.



Hide 33423A 10.INSTALL 3RD DRIVEN GEAR

a.
C397244N01
2.177,3.125 2.427,3.198 false 0.833,0.896 1.135,0.896 false 1.885,3.021 2.344,3.219 0.458,0.198 10 false SST 1.188,0.823 1.646,1.021 0.458,0.198 10 false SST

Using SST and a press, install the 3rd driven gear to the output shaft.

SST
09316-60012  (09316-00011)
09950-60011  (09951-00460)


Hide 33431C 11.INSTALL OUTPUT GEAR SPACER (between 4th driven gear and 3rd driven gear)

a.
C397132

Install the output gear spacer to the output shaft.


Hide 33422B 12.INSTALL 4TH DRIVEN GEAR

a.
C397245N01
0.365,0.906 0.635,0.906 false 2.208,3.073 2.427,3.156 false 0.063,0.823 0.521,1.021 0.458,0.198 10 false SST 1.927,2.979 2.385,3.177 0.458,0.198 10 false SST

Using SST and a press, install the 4th driven gear to the output shaft.

SST
09316-60012  (09316-00011)
09950-60011  (09951-00460)


Hide 33428C 13.INSTALL 5TH DRIVEN GEAR

a.
C397246N01
0.354,0.854 0.625,0.854 false 2.177,3.052 2.427,3.146 false 0.052,0.771 0.51,0.969 0.458,0.198 10 false SST 1.885,2.969 2.344,3.167 0.458,0.198 10 false SST

Using SST and a press, install the 5th driven gear to the output shaft.

SST
09316-60012  (09316-00011)
09950-60011  (09951-00460)


Hide 33431C 14.INSTALL OUTPUT GEAR SPACER (between 6th driven gear and 5th driven gear)

a.
C397130

Install the output gear spacer to the output shaft.


Hide 33429B 15.INSTALL 6TH DRIVEN GEAR

a.
C397247N01
0.375,0.646 0.635,0.646 false 2.167,3.083 2.458,3.177 false 0.073,0.552 0.531,0.75 0.458,0.198 10 false SST 1.875,2.99 2.333,3.188 0.458,0.198 10 false SST

Using SST and a press, install the 6th driven gear to the output shaft.

SST
09316-60012  (09316-00011)
09950-60011  (09951-00460)


Hide 33321A 16.INSTALL REAR OUTPUT SHAFT BEARING (INNER RACE)

a.
C397248N01
0.75,1.229 0.448,1.01 0.448,1.01 0.781,1.01 false 2.146,3.063 2.448,3.146 false 0.146,0.927 0.521,1.146 0.375,0.219 10 false SST 1.865,2.969 2.24,3.188 0.375,0.219 10 false SST

Using SST and a press, install a new rear output shaft bearing (inner race) to the output shaft.

SST
09950-60011  (09951-00370, 09951-00460)
09950-70010  (09951-07100)

NOTICE:

Do not deform the rear output shaft bearing (inner race) cage.



Hide 17.INSPECT 1ST GEAR THRUST CLEARANCE

Hide 18.INSPECT 2ND GEAR THRUST CLEARANCE

Hide 19.INSPECT 1ST GEAR RADIAL CLEARANCE

Hide 20.INSPECT 2ND GEAR RADIAL CLEARANCE