Be sure to correctly follow the removal and installation procedures for the lower No. 1 instrument panel airbag assembly.
1.INSPECT LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)
Perform a diagnostic system check.
w/o Occupant Classification System:
for Gasoline Model with Occupant Classification System:
for HV Model with Occupant Classification System:
Visually check for defects with the lower No. 1 instrument panel airbag assembly installed to the vehicle.
The defects are as follows:
Cuts
Small cracks
Significant discoloration
No defects are found.
If any defects are found, replace the lower No. 1 instrument panel airbag assembly with a new one.
2.INSPECT LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
Perform a diagnostic system check.
w/o Occupant Classification System:
for Gasoline Model with Occupant Classification System:
for HV Model with Occupant Classification System:
Visually check for defects with the lower No. 1 instrument panel airbag assembly removed from the vehicle.
The defects are as follows:
Cuts
Small cracks
Significant discoloration
Cracks or other damage to the connector
Deformation or cracks on the No. 1 instrument panel brace or No. 3 instrument panel brace or instrument panel reinforcement assembly
No defects are found.
If any defects are found, replace the No. 1 instrument panel brace or No. 3 instrument panel brace or instrument panel reinforcement assembly with a new one.