69065A
1.INSPECT AIRBAG CUT OFF SWITCH CYLINDER SUB-ASSEMBLY
| *a | Component without harness connected
(Airbag Cut Off Switch Cylinder Sub-assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 1 (PMC-) - 2 (PMC+) | Airbag cut off switch cylinder sub-assembly in ON | 360 to 440 Ω |
| 1 (PMC-) - 2 (PMC+) | Airbag cut off switch cylinder sub-assembly in OFF | 90 to 110 Ω |
If the result is not as specified, replace the airbag cut off switch cylinder sub-assembly.