Home › Engine / Hybrid System › A25A-FKS (LUBRICATION) › OIL LEVEL SENSOR
RM3620E _51 Engine / Hybrid System _076318 A25A-FKS LUBRICATION _0371466 OIL LEVEL SENSOR A

A25A-FKS LUBRICATION  OIL LEVEL SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 53896B 1.REMOVE FRONT FENDER FRONT SPLASH SHIELD LH

Hide 53895B 2.REMOVE FRONT FENDER FRONT SPLASH SHIELD RH

Hide 51441 3.REMOVE NO. 1 ENGINE UNDER COVER

Hide 51420 4.REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY

Hide 12102A 6.REMOVE NO. 2 OIL PAN SUB-ASSEMBLY

Hide 89491 7.REMOVE ENGINE OIL LEVEL SENSOR

a.

Disconnect the engine oil level sensor connector.


b.
A401897

Remove the clip from the engine oil level sensor.


c.
A401898

Using an 8 mm socket wrench, remove the 2 bolts and engine oil level sensor from the engine balancer assembly.