Home › Engine / Hybrid System › A25A-FKS (LUBRICATION) › OIL LEVEL SENSOR
RM3620E _51 Engine / Hybrid System _076318 A25A-FKS LUBRICATION _0371466 OIL LEVEL SENSOR A

A25A-FKS LUBRICATION  OIL LEVEL SENSOR  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 89491 1.INSTALL ENGINE OIL LEVEL SENSOR

a.

Using an 8 mm socket wrench, install the engine oil level sensor to the engine balancer assembly with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Install a new clip to the engine oil level sensor.


c.

Connect the engine oil level sensor connector.


Hide 12102A 2.INSTALL NO. 2 OIL PAN SUB-ASSEMBLY

Hide 4.INSPECT FOR ENGINE OIL LEAK

Hide 51420 6.INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY

Hide 53895B 8.INSTALL FRONT FENDER FRONT SPLASH SHIELD RH

Hide 53896B 9.INSTALL FRONT FENDER FRONT SPLASH SHIELD LH