Home › Engine / Hybrid System › A25A-FKS (LUBRICATION) › OIL LEVEL SENSOR
RM3620E _51 Engine / Hybrid System _076318 A25A-FKS LUBRICATION _0371466 OIL LEVEL SENSOR G

A25A-FKS LUBRICATION  OIL LEVEL SENSOR  INSPECTION  


PROCEDURE

Hide 89491 1.INSPECT ENGINE OIL LEVEL SENSOR

a.
A407395C01
1.688,0.885 2.354,0.365 2.354,0.365 2.573,0.365 true 1.802,3.177 1.615,3.177 1.615,3.177 1.365,2.896 false 2.115,2.26 1.896,2.021 1.896,2.021 1.729,2.021 false 0.063,0.031 0.375,0.188 0.313,0.156 10 false *a 1.573,1.938 1.885,2.094 0.313,0.156 10 false *b 0.927,1.813 1.24,1.969 0.313,0.156 10 false *c 2.385,1.802 2.698,1.958 0.313,0.156 10 false *d 2.604,0.271 2.76,0.469 0.156,0.198 10 false 1 1.813,3.083 2.125,3.24 0.313,0.156 10 false *b
*a Component without harness connected
(Engine Oil Level Sensor)
*b Engine Oil Level Sensor Body
*c ON
*d OFF


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - Engine oil level sensor body ON Below 1 Ω
OFF 10 kΩ or higher


If the result is not as specified, replace the engine oil level sensor.