Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM
RM3620E _58 Vehicle Interior _076050 LIGHTING (INT) _0371654 LIGHTING SYSTEM A

LIGHTING (INT)  LIGHTING SYSTEM  CUSTOMIZE PARAMETERS  


PROCEDURE

Hide 1.CUSTOMIZE LIGHTING SYSTEM (INT)

a.

Customizing using the GTS

HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize / Illuminated Entry or Entry & Start.


v.

Select the setting by referring to the table below.

Illuminated Entry
Tester Display Description Default Setting ECU
Lighting Time Changes the lighting time of the following lights that are operated by the timer function when the DOOR switch of the map light assembly and No. 1 room light assembly are on:
·

Map light assembly

·

No. 1 room light assembly

·

No. 1 interior illumination light assembly (footwell light)*1

·

No. 2 interior illumination light assembly (footwell light)*1

·

No. 3 interior illumination light assembly (center tray light)*2

·

No. 4 interior illumination light assembly (driver side tray light)*2

·

No. 5 interior illumination light assembly (front passenger side tray light)*2

·

No. 6 interior illumination light assembly (cup holder light)*3


15 s 10:30 s,00:15 s,01:7.5 s Main body ECU (multiplex network body ECU)
I/L when ACC OFF Turns off the following lights automatically when the DOOR switch of the map light assembly and No. 1 room light assembly are on and the ignition switch is turned from ON or ACC to off:
·

Map light assembly

·

No. 1 room light assembly

·

No. 1 interior illumination light assembly (footwell light)*1

·

No. 2 interior illumination light assembly (footwell light)*1

·

No. 3 interior illumination light assembly (center tray light)*2

·

No. 4 interior illumination light assembly (driver side tray light)*2

·

No. 5 interior illumination light assembly (front passenger side tray light)*2

·

No. 6 interior illumination light assembly (cup holder light)*3


ON 0:OFF,1:ON Main body ECU (multiplex network body ECU)
I/L ON W/Door Key Unlock Turns on the following lights automatically when the DOOR switch of the map light assembly and No. 1 room light assembly are on and the doors are unlocked by an unlock operation (key-linked, wireless or entry unlock function):
·

Map light assembly

·

No. 1 room light assembly

·

No. 1 interior illumination light assembly (footwell light)*1

·

No. 2 interior illumination light assembly (footwell light)*1

·

No. 3 interior illumination light assembly (center tray light)*2

·

No. 4 interior illumination light assembly (driver side tray light)*2

·

No. 5 interior illumination light assembly (front passenger side tray light)*2

·

No. 6 interior illumination light assembly (cup holder light)*3


ON 0:OFF,1:ON Main body ECU (multiplex network body ECU)
Room Light when Aprchd Turns on the following lights when the DOOR switch of the map light assembly and No. 1 room light assembly are on and the electrical key transmitter sub-assembly is brought near the vehicle:
·

Map light assembly

·

No. 1 room light assembly

·

No. 1 interior illumination light assembly (footwell light)*1

·

No. 2 interior illumination light assembly (footwell light)*1

·

No. 3 interior illumination light assembly (center tray light)*2

·

No. 4 interior illumination light assembly (driver side tray light)*2

·

No. 5 interior illumination light assembly (front passenger side tray light)*2

·

No. 6 interior illumination light assembly (cup holder light)*3


ON 0:OFF,1:ON Main body ECU (multiplex network body ECU)
Inside Foot Light Turns on the interior illumination light assembly (footwell light).*1 ON 0:OFF,1:ON Main body ECU (multiplex network body ECU)
Light Control Dims the following lights when the ignition switch is ON and the shift lever is moved to any position other than P:
·

No. 1 interior illumination light assembly (footwell light)*1

·

No. 2 interior illumination light assembly (footwell light)*1

·

No. 3 interior illumination light assembly (center tray light)*2

·

No. 4 interior illumination light assembly (driver side tray light)*2

·

No. 5 interior illumination light assembly (front passenger side tray light)*2

·

No. 6 interior illumination light assembly (cup holder light)*3


ON 0:OFF,1:ON Main body ECU (multiplex network body ECU)
Interior Light Control Turns on the following lights:
·

Map light assembly

·

No. 1 room light assembly

·

No. 1 interior illumination light assembly (footwell light)*1

·

No. 2 interior illumination light assembly (footwell light)*1

·

No. 3 interior illumination light assembly (center tray light)*2

·

No. 4 interior illumination light assembly (driver side tray light)*2

·

No. 5 interior illumination light assembly (front passenger side tray light)*2

·

No. 6 interior illumination light assembly (cup holder light)*3


ON 0:OFF,1:ON Main body ECU (multiplex network body ECU)
Interior Illumination Light Turns on the following lights:
·

Map light assembly

·

No. 1 room light assembly

·

No. 1 interior illumination light assembly (footwell light)*1

·

No. 2 interior illumination light assembly (footwell light)*1

·

No. 3 interior illumination light assembly (center tray light)*2

·

No. 4 interior illumination light assembly (driver side tray light)*2

·

No. 5 interior illumination light assembly (front passenger side tray light)*2

·

No. 6 interior illumination light assembly (cup holder light)*3


ON 0:OFF,1:ON Main body ECU (multiplex network body ECU)
50006 6

*1: w/ Footwell Light

*2: w/ Tray Light

*3: w/ Cup Holder Light


Entry & Start
Tester Display Description Default Setting ECU
Engine Start Indicator Setting for the function to turn on the push start switch illumination or cause it to blink.* ON 0:OFF,1:ON Certification ECU (smart key ECU assembly)
50006 17

*: w/ Entry and Start System




b.

Customizing using the multi-display

i.

Turn the ignition switch to ON.


ii.

Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Lights Settings.


iii.

Select the setting by referring to the table below:

Light Settings
Display Default Content Setting Relevant ECU

*1: w/ Footwell Light

*2: w/ Tray Light

*3: Cup Holder Light

Interior Light Off Timer 15 sec. Changes the lighting time of the following lights that are operated by the timer function when the DOOR switch of the map light assembly and No. 1 room light assembly is on:
·

Map light assembly

·

No. 1 room light assembly

·

No. 1 interior illumination light assembly (footwell light)*1

·

No. 2 interior illumination light assembly (footwell light)*1

·

No. 3 interior illumination light assembly (center tray light)*2

·

No. 4 interior illumination light assembly (driver side tray light)*2

·

No. 5 interior illumination light assembly (front passenger side tray light)*2

·

No. 6 interior illumination light assembly (cup holder light)*3


Off, 7.5 sec., 15 sec., or 30 sec. Main body ECU (multiplex network body ECU)